Kongskilde MULTIAIR FC 1000 User manual

MultiAir FC 1000 / FC 2000 series
Installation of lter kit
From sales no. 123022000

2
1 - remove the lower blue panel by loosening 4 screws,
and put the panel aside
2 - attach the enclosed foam strip in both lower corners
3 - cut off the foam strip as shown
4 - insert the enclosed four foam blocks in both left and
right side of the blowers bottom frame, and push the
blocks forward / sideways, as far as possible. These
blocks will close the metal sheet gaps in the bottom
frame.
5 - inserted foam block

3
6 - push sideways
7 - push forward
8 - push sideways
9 - insert the new lter panel, by tilting in the top rst,
thereafter pushing in the bottom
10 - reattach all four screws
11 - the lter is accessible by opening the door, after
which the lter can be cleaned or replaced. When the
lter is inserted, ensure that the two slots are adjacent
to the magnets

Kongskilde Industries A/S
Skælskørvej 64
DK - 4180 Sorø
Tel. [phone]
[email protected]om
www.kongskilde-industries.com
123 022 911 You can always nd the latest version of the manuals at 01.11.2020
www.kongskilde-industries.com