Konica Minolta bizhub 200 User manual

U
ser
’
s
G
uide
[C
o
py
Op
erations
]

Introduction
200/250/350 x-1
Introduction
Thank you for choosing this machine.
This User’s Guide contains details on the operation of the various functions
of the bizhub 200, 250 and 350, precautions on its use, and basic trouble-
shooting procedures. In order to ensure that this machine is used correctly
and efficiently, carefully read this User’s Guide before using the machine. Af-
ter reading the User’s Guide, store it in the designated holder so that it can
easily be referred to when questions or problems arise during operation.
Views of the actual equipment may be slightly different from the illustrations
used in this User’s Guide.
Energy Star®
As an ENERGY STAR®Partner, we have determined that this machine meets
the ENERGY STAR®Guidelines for energy efficiency.
What is an ENERGY STAR®Product?
An ENERGY STAR®product has a special feature that allows it to automat-
ically switch to a “low-power mode” after a period of inactivity. An ENERGY
STAR®product uses energy more efficiently, saves you money on utility bills
and helps protect the environment.

Introduction
x-2 200/250/350
Trademarks and registered trademarks
KONICA MINOLTA, KONICA MINOLTA Logo, and The essentials of imaging
are registered trademarks or trademarks of KONICA MINOLTA HOLDINGS,
INC.
PageScope and bizhub are registered trademarks or trademarks of KONICA
MINOLTA BUSINESS TECHNOLOGIES, INC.
Netscape Communications, the Netscape Communications logo, Netscape
Navigator, Netscape Communicator, and Netscape are trademarks of Net-
scape Communications Corporation.
Compact-VJE
Copyright 1986-2003 VACS Corp.
RC4®is a registered trademark or trademark of RSA Security Inc. in the Unit-
ed States and/or other countries.
RSA®is a registered trademark or trademark of RSA Security Inc. RSA
BSAFE®is a registered trademark or trademark of RSA Security Inc. in the
United States and/or other countries.
License information
This product includes RSA BSAFE Cryptographic software
from RSA Security Inc.
OpenSSL Statement
OpenSSL License
Copyright © 1998-2000 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modifica-
tion, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright no-
tice, this list of conditions and the following disclaimer in the documen-
tation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must
display the following acknowledgment:
“This product includes software developed by the OpenSSL Project for
use in the OpenSSL Toolkit. (http://www.openssl.org/)”

Introduction
200/250/350 x-3
4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used
to endorse or promote products derived from this software without prior
written permission. For written permission, please contact openssl-
[email protected].
5. Products derived from this software may not be called “OpenSSL” nor
may “OpenSSL” appear in their names without prior written permission
of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following ac-
knowledgment:
“This product includes software developed by the OpenSSL Project for
use in the OpenSSL Toolkit (http://www.openssl.org/)”
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND
ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIM-
ITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FIT-
NESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CON-
SEQENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCURE-
MENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
This product includes cryptographic software written by Eric Young
([e-mail]). This product includes software written by Tim Hud-
son ([e-mail]).
Original SSLeay License
Copyright © 1995-1998 Eric Young ([e-mail]) All rights reserved.
This package is an SSL implementation written by Eric Young (eay@crypt-
soft.com).
The implementation was written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the fol-
lowing conditions are aheared to. The following conditions apply to all code
found in this distribution, be it the RC4, RSA, Ihash, DES, etc., code; not just
the SSL code.
The SSL documentation included with this distribution is covered by the
same copyright terms except that the holder is Tim Hudson (tjh@crypt-
soft.com).
Copyright remains Eric Young’s, and as such any Copyright notices in the
code are not to be removed. If this package is used in a product, Eric Young
should be given attribution as the author of the parts of the library used. This
can be in the form of a textual message at program startup or in documen-
tation (online or textual) provided with the package.

Introduction
x-4 200/250/350
Redistribution and use in source and binary forms, with or without modifica-
tion, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list
of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright no-
tice, this list of conditions and the following disclaimer in the documen-
tation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must
display the following acknowledgement:
“This product includes cryptographic software written by Eric Young
([email protected])”
The word ‘cryptographic’ can be left out if the rouines from the library be-
ing used are not cryptographic related.
4. If you include any Windows specific code (or a derivative thereof) from
the apps directory (application code) you must include an acknowledge-
ment:
“This product includes software written by Tin Hudson (tjh@crypt-
soft.com)”
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EX-
PRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AU-
THOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCI-
DENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILI-
TY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
The licence and distribution terms for any publically available version or de-
rivative of this code cannot be changed. i.e. this code cannot simply be cop-
ied and put under another distribution licence [including the GNU Public
Licence.]
All other product names mentioned are trademarks or registered trademarks
of their respective companies

Introduction
200/250/350 x-5
Contents
Introduction
Energy Star®..................................................................................... x-1
What is an ENERGY STAR®Product? ............................................x-1
Trademarks and registered trademarks ......................................... x-2
Contents ............................................................................................ x-5
Available features ........................................................................... x-16
Automatically selecting the paper .................................................x-16
Adjusting copies to the size of the paper .....................................x-16
Specifying separate horizontal and vertical zoom ratios ..............x-16
Scanning the document in separate batches ...............................x-16
Sorting copies ...............................................................................x-16
Stapling copies .............................................................................x-17
Punching holes in copies ..............................................................x-17
Center binding ...............................................................................x-17
Copying multiple document pages onto a single page ................x-18
Copying a document containing pages of various sizes ..............x-18
Adjusting copies according to the image quality of the original ...x-18
Adding a cover page .....................................................................x-18
Adding insertions, such as colored paper, within copies .............x-19
Inserting paper (interleaves) between copies of overhead
projector transparencies ...............................................................x-19
Adding a binding margin to copies ...............................................x-19
Erasing sections of copies ............................................................x-20
Repeating copy images ................................................................x-20
Separately copying a page spread ...............................................x-20
Copying with a layout of a book or magazine ...............................x-20
Printing distribution numbers and stamps ....................................x-21
Printing copies overlapping a different image ..............................x-21
Copying with black and white reversed ........................................x-21
Checking copy jobs ......................................................................x-21
Programming copy settings ..........................................................x-21
Checking the copy settings ..........................................................x-21
Enlarging the size of text in touch panel screens .........................x-22
Interrupting a copy job ..................................................................x-22
Printing a proof copy .....................................................................x-22
Saving copy documents ...............................................................x-22
Explanation of manual conventions .............................................. x-23
User’s Guides .................................................................................. x-25
User’s Guide [Copy Operations] (this manual) ..............................x-25
User’s Guide [Network Scanner Operations] ................................x-25
User’s Guide [Box Operations] .....................................................x-25

Introduction
x-6 200/250/350
User’s Guide [Print Operations] ....................................................x-25
Quick Guide [Print Operations] .....................................................x-25
User’s Guide [Advanced Scan Operations] ..................................x-25
User’s Guide [Facsimile Operations] ............................................x-26
Descriptions and symbols for documents and paper ..................x-27
“Width” and “Length” ...................................................................x-27
Paper orientation ..........................................................................x-27
Legal restrictions on copying .........................................................x-29
1 Installation and operation precautions
1.1 Safety information .............................................................................1-2
Warning and precaution symbols ...................................................1-2
Meaning of symbols ........................................................................1-2
1.2 USER INSTRUCTIONS ......................................................................1-9
FCC PART 15 - RADIO FREQUENCY DEVICES
(For U.S.A. Users) ...........................................................................1-9
INTERFERENCE-CAUSING EQUIPMENT STANDARD
(ICES-003 ISSUE 3) (For Canada Users) ........................................1-9
For users in countries subject to Class B regulations ....................1-9
For users in countries not subject to Class B regulations ..............1-9
1.3 Laser safety ......................................................................................1-10
Internal laser radiation ..................................................................1-10
CDRH regulation ...........................................................................1-11
For European users .......................................................................1-11
For Denmark users .......................................................................1-11
For Finland, Sweden users ...........................................................1-12
For Norway users ..........................................................................1-12
Laser safety label ..........................................................................1-13
Ozone release ...............................................................................1-13
Acoustic noise (For European users only) ....................................1-14
For EU member states only ..........................................................1-14
1.4 Caution notations and labels ..........................................................1-15
1.5 Space requirements ........................................................................1-16
1.6 Operation precautions ....................................................................1-17
Power source ................................................................................1-17
Operating environment .................................................................1-17
Storage of copies ..........................................................................1-17

Introduction
200/250/350 x-7
2 Before making copies
2.1 Part names and their functions ....................................................... 2-2
Options ........................................................................................... 2-2
Outside of machine ........................................................................ 2-5
Inside/back of main unit ................................................................. 2-7
Reverse Automatic Document Feeder DF-605 .............................. 2-9
Paper Feed Cabinet PC-102/PC-202/PC-402 ............................. 2-10
Saddle Stitcher SD-502/Mailbin Kit MT-501 ................................ 2-11
Finisher FS-508/Output Tray OT-601/Punch Unit PU-501 .......... 2-12
Control panel ................................................................................ 2-14
Basic settings screen (Basics screen) ......................................... 2-17
Icons that appear in the screen ................................................... 2-18
Enlarging the touch panel screens ............................................... 2-19
2.2 Adjusting the angle of the control panel ...................................... 2-20
To adjust the angle of the control panel ...................................... 2-20
2.3 Turning on the main power and the auxiliary power ................... 2-22
To turn on the machine ................................................................ 2-22
To scan during warm-up .............................................................. 2-24
To turn off the machine ................................................................ 2-26
Automatically returning to the default settings
(Automatic panel reset) ................................................................ 2-27
Automatically returning to the screen given priority .................... 2-27
Automatically conserving energy (Low Power mode) .................. 2-28
Automatically conserving energy (Sleep mode) ........................... 2-28
Darkening the touch panel (LCD Back-Light Off) ........................ 2-29
Controlling machine use with user authentication
(machine authentication) .............................................................. 2-30
Controlling machine use with user authentication
(external server authentication) .................................................... 2-33
Limiting user access with account track ...................................... 2-37
Controlling machine use with user authentication
(external server authentication) and account track ...................... 2-40
Controlling machine use with user authentication
(machine authentication) and account track ................................ 2-45
Controlling machine use with user authentication
(machine authentication) and account track synchronized ......... 2-50
2.4 Loading paper into the 1st or 2nd tray ......................................... 2-54
To load paper (1st or 2nd tray) ..................................................... 2-54
2.5 Loading paper into the LCT ........................................................... 2-57
To load paper (LCT) ..................................................................... 2-57
2.6 Loading paper into the bypass tray .............................................. 2-60
To load paper (bypass tray) ......................................................... 2-60

Introduction
x-8 200/250/350
3 Basic copy operation
3.1 General copy operation ....................................................................3-2
To make a copy ..............................................................................3-2
3.2 Operations that cannot be combined ..............................................3-5
Operations where the setting specified last is given priority ..........3-5
Operations where the setting specified first is given priority ..........3-7
3.3 Feeding the document ......................................................................3-8
To load the document into the ADF ................................................3-8
To place the document on the original glass ................................3-10
Scanning a document in separate batches
(“Separate Scan” setting) ..............................................................3-12
Scanning a multi-page document from the original glass ............3-14
3.4 Specifying document settings ........................................................3-16
Copying documents of mixed sizes (“Mixed Original” setting) .....3-16
To copy documents with the “Mixed Original” setting .................3-16
Selecting the document orientation
(Original Direction settings) ...........................................................3-19
To select an Original Direction setting ..........................................3-20
Selecting the position of the binding margin (Margin settings) ....3-21
To select a Margin setting ............................................................3-23
3.5 Selecting a Paper setting ................................................................3-24
Automatically selecting the paper size
(“Auto Paper Select” setting) ........................................................3-24
Manually selecting the desired paper size ....................................3-25
3.6 Specifying a Zoom setting ..............................................................3-27
Automatically selecting the zoom ratio (“Auto Zoom” setting) .....3-27
Specifying the same zoom ratio as the document
(“×1.0” setting) ..............................................................................3-29
Slightly reducing the copy (“Minimal” setting) ..............................3-30
Finely adjusting the zoom ratio .....................................................3-31
Selecting a preset zoom ratio (Enlarge and Reduce settings) ......3-32
Typing in the zoom ratio ...............................................................3-33
Specifying separate horizontal and vertical zoom ratios
(Individual Zoom settings) .............................................................3-34
Selecting a stored zoom ratio .......................................................3-36
Storing the desired zoom ratio .....................................................3-37
3.7 Selecting single-/double-sided settings for originals and
copies ...............................................................................................3-39
To select single-sided copies .......................................................3-40
To select double-sided copies .....................................................3-41
3.8 Specifying document quality/density settings ..............................3-43
Specifying a document quality setting ..........................................3-44

Introduction
200/250/350 x-9
Adjusting the Copy Density (Density settings) ............................. 3-45
3.9 Selecting a Combine Originals setting ......................................... 3-46
Copying multiple document pages onto a single page
(combined copy settings) ............................................................. 3-49
3.10 Selecting finishing for copies ........................................................ 3-50
Separating copies by sets (“Sort” setting) ................................... 3-53
Separating copies by pages (“Group” setting) ............................ 3-54
Stapling copies (staple settings) .................................................. 3-55
To bind copies with staples ......................................................... 3-56
Punching holes in copies (punch settings) .................................. 3-57
To punch holes in copies ............................................................. 3-57
Binding copies at the center ........................................................ 3-59
To bind copies at the center ........................................................ 3-59
3.11 Scanning the next document during printing
(reserving a copy job) ..................................................................... 3-61
To reserve a copy job .................................................................. 3-61
3.12 Stopping/deleting a job .................................................................. 3-63
To stop/delete a copy job ............................................................ 3-63
4 Additional copy operations
4.1 Checking the copy settings (Mode Check) .................................... 4-2
To check the settings ..................................................................... 4-2
To change the settings ................................................................... 4-4
4.2 Printing a sample to check the settings (Proof Copy) .................. 4-5
To make test prints ........................................................................ 4-5
4.3 Interrupting a copy job (Interrupt mode) ........................................ 4-7
To interrupt a copy job ................................................................... 4-7
4.4 Registering copy programs (Mode Memory) ................................. 4-8
To register a copy program ............................................................ 4-8
To recall a copy program ............................................................. 4-10
To checking the copy settings ..................................................... 4-11
To delete a registered copy program ........................................... 4-12
4.5 Specifying control panel settings (Accessibility mode) .............. 4-14
To display the Accessibility Settings screen ................................ 4-14
To set the “Screen Mode” function .............................................. 4-15
To set the “Key Speed Settings” function ................................... 4-16
To set the “Extend Auto Reset” function ..................................... 4-17
To set the “Notification Screen” function .................................... 4-18
To set the “Sound Setting” function ............................................ 4-19
To set the “Key Sound Tones” function ....................................... 4-20