Konica Minolta Di470 User manual

4028-7762-01
Di470/Di552
Convenient Functions That are Good to Know

This machine allows the user to perform various functions when it is equipped with
different options.
This booklet gives you a quick overview of the procedures to follow to use some of
the basic functions the machine offers.
For greater details, see Operator’s Manual, available separately.
Contents
◆It’s Easy!
Making a Copy Set/Stack of One Size .................................. 2
Using Z-Fold Cleverly ............................................................ 4
Making Stapled Copy Sets/Stacks ........................................ 6
Stamping an Image on Copies .............................................. 8
Storing an Image .................................................................. 10
Control Panel Adjusting Dial ................................................. 12
◆What To Do?
Making Copies on Post Cards.............................................. 14
Making Copies from a Book................................................. 16
◆Ecology
Making a Booklet ................................................................. 18
Saving Paper ........................................................................ 20
Saving Power Consumption ................................................. 22
◆Trouble!
Running out of Paper ............................................................ 24
Paper Misfeed ...................................................................... 26

2
Making a Copy Set/Stack
Suppose you have a document that consists of Letter-size pages and 11x17-size pages
and you would like a copy set in Letter size.
What would you do?
You could make copies from Letter-size pages first, then from 11x17-size pages, and later
merge them into a set manually.
But why go to all that trouble!
4002O081AA
Originals
Letter
11x17
Letter Letter
Step 1
Loading the originals
1. Load your originals.
You can load originals of varying sizes at one
time.
4002O147AD
Step 2
Setting the Mixed Orig. Detection function
1. Press the Original key.
4002O294CA
2. Touch [Mixed Orig. Detection].
C4028P119CA
Copies

3
of One Size
❏NOTE
· You will need an Electronic Document Handler mounted on your machine.
✍Useful Tip
· The machine can also automatically select the appropriate size of paper,
according to each original, and make full-size copies.
Operator’s Manual
Reference Pages:
Auto Paper☞p.3-9
Selecting the Zoom
☞p.3-14
Auto Size☞p.3-14
Mixed Orig. Detection
☞p.3-67
Step 3Step 4
Making the Touch Panel settings
1. Touch [Zoom].
C4028P006CA
2. Touch [Auto Size].
C4028P019EA
3. Select the paper size.
C4028P010EA
Starting the copy cycle
1. Press the Start key.
4002O280CB

4
Using Z-Fold Cleverly
4002O323AA
Originals
Letter
11x17
Letter 11x17 Z-folded
Step 1
Loading the originals
1. Load your originals.
You can load originals of varying sizes at one
time.
4002O147AD
Step 2
Setting the Mixed Orig. Detection function
1. Press the Original key.
4002O294CA
2. Touch [Mixed Orig. Detection].
C4028P119CA
Copies
You may want to make copies of the same sizes as those of a document that contains
Letter-size pages and 11x17-size pages. Still you want to have a neat copy set of Letter-
size pages.
What would you do in such cases?
Would you take the trouble to fold 11x17-size copies into Letter size by hand?
Don’t bother!

5
❏NOTES
· You will need an Electronic Document Handler and a Finisher FN-5
mounted on your machine.
· Make sure that [Auto Paper] is selected. If [Auto Paper] is not selected,
touch [Auto Paper] to highlight it.
✍Useful Tip
· You can also combine this function with Staple or Hole Punch.
Operator’s Manual
Reference Pages:
Auto Paper☞p.3-9
Hole Punch☞p.3-23
Staple☞p.3-24
Folding☞p.3-28
Mixed Orig. Detection
☞p.3-67
Step 3Step 4
Making the Touch Panel settings
1. Touch [Finishing] and then [Folding].
C4028P044CA
2. Touch [Z-Fold].
C4028P050CA
3. Touch [LTR] of Output Size.
C4028P051EA
Starting the copy cycle
1. Press the Start key.
4002O280CB

6
Making Stapled Copy Sets/
You may find it troublesome to sort and/or staple copy sets or stacks.
Let the machine take care of these chores.
4002O082AA
Copy SetsOriginals
Stapled
Step 1Step 2
Loading the originals
1. Load your originals.
4002O122AC
Making the Touch Panel settings
1. Touch [Finishing].
C4028P006CA
2. Touch [Sort].
C4028P034EA
3. Touch [Corner Staple] or [2-Point Staple].
C4028P039EA

7
Stacks
❏NOTE
· You will need an Electronic Document Handler and a Finisher or Mailbin
Finisher mounted on your machine.
✍Useful Tips
· The machine can also staple a copy set or stack which has previously
been removed from it.
· Holes can also be punched in your copy sets or stacks.
Operator’s Manual
Reference Pages:
Finishing Function
☞p.3-20
Sort☞p.3-22
Hole Punch☞p.3-23
Staple☞p.3-24
Manual Staple☞p.3-26
4002O077AB
4002O305CA
Hole Punch
Step 3
Starting the copy cycle
1. Press the Start key.
4002O280CB

8
Stamping an Image on Copies
Characters or illustrations of your choice may be programmed in memory so that you can
put them on the finished copies like a stamp.
4002O301CA
CopiesOriginals
Step 1Step 2
Placing the original(s)
1. Place the original(s).
4002O149AC
Making the Touch Panel settings 1
1. Touch [Auxiliary].
C4028P002CA
2. Touch [Image Stamping].
C4028P113CA
3. Touch [Set] and then the number key in which
your image has been stored.
C4028P116EA

9
❏NOTE
· You will need a Hard Disk Drive Kit and 32MB Memory mounted on
your machine.
✍Useful Tips
· Page number can be printed.
· Reference number can be printed.
· The date can also be printed.
Operator’s Manual
Reference Pages:
Image Memory Input
☞p.5-6
Number Stamping
☞p.3-60
Date☞p.3-61
Page☞p.3-62
Distribution☞p.3-63
Image Stamping
☞p.3-64
Step 3
Making the Touch Panel settings 2
1. Select the image stamping position.
C4028Q001CA
2. Touch [Enter].
C4028Q002CA
Step 4
Starting the copy cycle
1. Press the Start key.
4002O280CB

10
Storing an Image
Image samples: Make a copy and cut out the image of your choice to use as the source of
image to be stamped.
4002O306CA
Step 1Step 2
Making the Touch Panel settings 1
1. Press the Utility key.
4002O282CA
2. Touch [Job/Image/Scan Input].
4003P142CA
3. Touch [Image Memory Input].
4003P152CA
Placing the original
1. Place the original for the image to be stamped
on the Original Glass.
Make sure that it is placed in the direction
shown.
4002O316AB
2. Select the direction of the image.
4003P162CB

11
Image samples: Make a copy and cut out the image of your choice to use as the source of
image to be stamped.
4002O307CA
Step 3Step 4
Making the Touch Panel settings 2
1. Touch [Input], then touch the desired image
number key, in which you want to store the
image. (The number marked with is
available for storing an image.)
4003P453EC
2. Touch [Auto Detect] and then [Enter].
4003P455EB
Storing the image
1. Press the Start key.
4002O280CB

12
Control Panel Adjusting Dial
The surface of the control panel for this unit can be adjusted to different angles.
Turn the control panel adjusting dial until the control panel is at an angle where it can easily
be operated.
C4028U004AA

13

14
Making Copies on Post Cards
Has this happened to you?
You made copies on post cards, but put your data mistakenly on the front side, or upside
down, wasting a number of post cards.
4002O302CA
Step 1Step 2
Placing the original
1. Place your original face down on the Original
Glass. Make sure that it is placed in the
direction shown.
4002O300AB
2. Touch [Orig. Copy].
3. Touch [Original Direction] and select .
C4028Q003CA
4. Touch [Enter].
Loading post cards
1. Load the post cards in the Multi Bypass Tray.
Note the correct direction of the post card for
loading.
* Be sure to face up the post cards.
4002O303CB
Up to 20 post cards can be loaded.
When you have loaded your post cards, a
new screen will appear.
C4028P012EA

15
❏NOTE
· These pages give an example of making copies on 4x6 post cards.
For any other sizes, take measurements of the particular post card for
your own use.
✍Useful Tip
· When using the Multi Bypass Tray as the paper source, be sure to
place post cards face up on the tray.
Operator’s Manual
Reference Pages:
Manual Bypass☞p.3-11
Step 3Step 4
Making the Touch Panel settings
1. Touch [Paper Type] and select [Card/Vellum].
C4028Q004EA
2. Touch [Enter].
3. Touch [Custom Size].A new screen will appear.
4. Touch [X] and, using [ ] or [ ], show “6.”
C4028Q005EA
5. Touch [Y] and, using [ ] or [ ], show “4.”
6. Touch [Enter].
Starting the copy cycle
1. Press the Start key.
4002O280CB
This will produce a copy as shown below.
4002O304CA

16
Making Copies from a Book
How do you cope with the need to make copies from a book or magazine?
Do you make a two-page spread copy straight from an open book?
Have you sometimes needed to make copies in ascending order of the original pages?
4002O087AA
Original Copy
1st Page 1st Page
2nd Page 2nd Page
Step 1Step 2
Placing the original
1. Place the bound original on the Original Glass
in correct alignment with the book mark as
illustrated. (Make a copies in ascending order
of the original page.)
1155O697AA
Book Mark
BOOK
Making the Touch Panel settings 1
1. Touch [Orig. Copy].
C4028P007CA
2. Touch [Book].
C4028P061CA
3. Touch [Standard Book] or [Right Bound] and
touch [Separation]. Then, touch [Enter].
C4028P063CA

17
✍Useful Tip
· You can use the erase function to erase shadows at the center and/or
edges that would otherwise appear on the copy.
Operator’s Manual
Reference Pages:
Select Book☞p.3-40
Step 3Step 4
Making the Touch Panel settings 2
1. Touch [Double-Sided].
C4028Q006CA
2. Touch [Page arrange].
C4028P065CA
3. Select [Book-Order] and touch [Enter].
C4028P068CA
Starting the copy cycle
1. Press the Start key.
4002O280CB
2. If the message as shown below appears, turn
to next page and press the Start key again.
4003P242CA
3. Repeat step 2 until the last page is scanned.
Then touch [Finish] and press the Start key.

18
Making a Booklet
You want to make copies and bind them into a booklet.
What would you do?
Do you rack your brains out to change the order of pages of the document before making
copies?
Why bother?
4002O324AC
Original
Step 1Step 2
Loading the originals
1. Load your originals.
4002O122AC
Making the Touch Panel settings 1
1. Touch [Orig. Copy].
C4028P007CA
2. Touch [4in1/Booklet].
C4028P055CA
3. Touch [Booklet Creation] and then touch
[Enter].
C4028P056CA
Copy

19
❏NOTE
· You will need an Electronic Document Handler and a Finisher FN-5
mounted on your machine.
✍Useful Tip
· The paper size and zoom ratio can be set according to your need.
Operator’s Manual
Reference Pages:
Finishing Functions
☞p.3-20
Staple☞p.3-24
Selecting the Original
Copy Type☞p.3-36
Step 3Step 4
Making the Touch Panel settings 1
1. Touch [Finishing] and then [Folding].
C4028Q008EA
2. Touch [Crease].
C4028Q009EA
3. Touch [2-Point Staple] and then [Enter].
C4028Q010EA
Starting the copy cycle
1. Press the Start key.
4002O280CB