Konica Minolta Di5510 User manual

Di5510/Di7210
User Manual

Recycled paper is used for the inside pages of this book.
Di5510/Di7210
User Manual
ENERGY STAR® Program
The ENERGY STAR Program has been established to encourage the
widespread and voluntary use of energy-efficient technologies that reduce
energy consumption and prevent pollution. As an ENERGY STAR Partner, we
have determined that this product meets the ENERGY STAR guidelines for
energy efficiency, based on the following features.
Auto Low Power
This function conserves energy by lowering the set temperature of the fixing unit. In the standard setting, Auto
Low Power operates automatically when 15 minutes have elapsed after completion of the last copy, with the
copier remaining in the ready to copy state during that time.
The time period for the Auto Low Power function can be set for 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60
minutes, 90 minutes, 120 minutes, or 240 minutes. See p. 5-2 for details.
Automatic Shut-Off
This function achieves further energy conservation by partially turning the power supply OFF, thereby reducing
energy consumption to 20W or less. In the standard setting, Automatic Shut-Off follows Auto Low Power,
operating automatically when 90 minutes have elapsed after completion of the last copy, with the copier
remaining in the ready to copy state during that time.
The time period for the Automatic Shut-Off function can be set for 30 minutes, 60 minutes, 90 minutes, 120
minutes or 240 minutes. See p. 5-3 for details.
Automatic Duplex Copying
To reduce paper consumption, use this function to make double-sided (duplex) copies, automatically.
We recommend that you utilize the Auto Low Power function, the Automatic Shut-Off function, and the Automatic
Duplex Copying function.
Copyright© 2000 Go Ahead Software,Inc. All rights reserved.

© 2003 by Konica Minolta Business Technologies., Inc.
MAINTENANCE AGREEMENT:
The Di5510/Di7210 will give you many years of trouble-free service. To ensure high-quality copying performance
and to prevent premature wear or failure of precision parts and components, schedule periodic cleaning and
routine adjustments.
We recommend that you contact your service center to discuss the benefits and advantages of Customer Service
Maintenance Agreement and to be shown how a maintenance plan can be tailored to your individual copying
needs.
NOTICE:
Konica Minolta Business Tecnologies., Inc. has made every effort to ensure that the information in this manual is
complete and accurate. However, constant efforts are also being made to improve and update the product.
Therefore, Konica Minolta Business Tecnologies., Inc. shall not be liable for errors in this manual or for any
consequential damage resulting from the use of this manual. The information contained herein is subject to
change without notice.
FEDERAL OR STATE STATUTES MAY PROHIBIT THE COPYING OF CERTAIN DOCUMENTS OR
INFORMATION, RESULTING IN FINES OR IMPRISONMENT FOR VIOLATORS.

Section 1: Introduction
To the User .....................................................................................................................1-2
Key Operator Functions ........................................................................................... 1-2
Copier Service, Repairs & Supplies......................................................................... 1-2
Machine Labels........................................................................................................ 1-2
Control Panel with Interactive Touch Screen........................................................... 1-2
Overview of the User’s Manual ................................................................................ 1-3
Help Mode................................................................................................................ 1-3
Product Overview............................................................................................................ 1-4
Features of the Di5510/Di7210 ....................................................................................... 1-6
Copier Features ............................................................................................................ 1-13
Standard Equipment .............................................................................................. 1-13
Optional Equipment ............................................................................................... 1-13
Section 2: Safety Information
User Instructions ............................................................................................................. 2-2
Machine Labels ............................................................................................................... 2-3
Label Locations........................................................................................................ 2-3
Machine Installation and Power Requirements............................................................... 2-8
Machine Handling and Care.......................................................................................... 2-10
Routine Safety............................................................................................................... 2-11
Regulations ................................................................................................................... 2-12
FCC Regulations.................................................................................................... 2-12
ICES Regulations................................................................................................... 2-12
Laser Safety........................................................................................................... 2-12
Internal Laser Radiation......................................................................................... 2-13
Laser Safety Label ................................................................................................. 2-16
Ozone Release ...................................................................................................... 2-17
Finisher Capacity Requirements ................................................................................... 2-18
Section 3: Machine Information
Machine Configuration .................................................................................................... 3-2
External Machine Call-outs ...................................................................................... 3-3
Internal Machine Call-outs ....................................................................................... 3-5
Optional Equipment ................................................................................................. 3-6
Site Requirements......................................................................................................... 3-15
Control Panel Layout..................................................................................................... 3-18
Touch Screen................................................................................................................ 3-20
Basic Screen.......................................................................................................... 3-20
Initial Settings................................................................................................................3-21
Panel Reset Mode......................................................................................................... 3-21
Automatic Paper Selection (APS) ................................................................................. 3-21
Automatic Magnification Selection (AMS) ..................................................................... 3-21
Automatic Exposure Selection (AES)............................................................................ 3-21
Automatic Tray Switching (ATS) ................................................................................... 3-21

Lead Edge Delete ......................................................................................................... 3-22
Service Settings ............................................................................................................ 3-22
Finisher-Paper Capacity ........................................................................................ 3-22
Key Operator Password......................................................................................... 3-22
ECM Master Key Code .......................................................................................... 3-22
Weekly Timer Master Key Code ............................................................................ 3-22
HDD Management Password ................................................................................ 3-23
Section 4: Paper Information
Positioning Originals on the Platen Glass ....................................................................... 4-2
Positioning an Original for Manual Copying............................................................. 4-2
Using the Electronic Document Handler (EDH) .............................................................. 4-3
Positioning Originals ................................................................................................ 4-4
Positioning Mixed Originals...................................................................................... 4-5
Paper in Main Body Trays............................................................................................... 4-6
Paper in C-403 Large Capacity Cassette (Option).......................................................... 4-7
Paper in C-404 Large Capacity Cassette (Option).......................................................... 4-7
Paper in Automatic Duplex Unit ...................................................................................... 4-8
Paper in Multi-Sheet Bypass Tray................................................................................... 4-8
Paper in FN-121/FN-10/FN-115 Finisher (Option) .......................................................... 4-9
FN-121/FN-10/FN-115 Finisher Primary (Main) Tray .............................................. 4-9
FN-121/FN-10/FN-115 Finisher Secondary (Sub) Tray ......................................... 4-10
FN-10 Finisher Booklet Tray.................................................................................. 4-10
Paper in FN-122 Finisher (Option)................................................................................ 4-11
Paper in Cover Inserter E (Option)................................................................................ 4-12
Paper in PK-2/PK-5 Punch Kit (Option) ........................................................................ 4-12
Paper in PK-5 (US 2 HOLES) Punch Kit (Option)......................................................... 4-12
Paper in ZK-3 Z-Fold Kit (Option) ................................................................................. 4-13
Paper in OT-104 Shift Tray (Option) ............................................................................. 4-13
Paper Weight Compatibility Chart ................................................................................. 4-14
Section 5: Copier Management
Energy Saver Mode ........................................................................................................ 5-2
Auto Low Power....................................................................................................... 5-2
Manual Low Power .................................................................................................. 5-2
Auto Shut-Off ........................................................................................................... 5-3
Manual Shut-Off....................................................................................................... 5-3
Entering an ECM Password............................................................................................ 5-4
Weekly Timer Function ................................................................................................... 5-5
Timer Interrupt ......................................................................................................... 5-5
Counter List..................................................................................................................... 5-7
To Display the Counter List...................................................................................... 5-7
To Print the Counter List.......................................................................................... 5-7
Section 3: Machine Information (continued)

Section 6: Basic Operations
How to Make a Basic Copy ............................................................................................. 6-2
The Basic Screen..................................................................................................... 6-2
Setting Job During Warm-up.................................................................................... 6-4
To Stop Scanning/Printing ....................................................................................... 6-5
Recalling Previous Job Settings .............................................................................. 6-6
Copy Mode...................................................................................................................... 6-7
Copy Mode Specifications: ...................................................................................... 6-7
Copy Mode Using EDH............................................................................................ 6-8
1-2 Copy Mode Using Platen Glass......................................................................... 6-9
Using the Multi-Sheet Bypass Tray............................................................................... 6-11
Copy Density................................................................................................................. 6-13
Automatic Exposure Selection (AES) .................................................................... 6-13
Manual Mode (Lighter, Normal, Darker) ................................................................ 6-13
Density Shift........................................................................................................... 6-14
Lens Mode .................................................................................................................... 6-16
Automatic Paper Selection (APS) .......................................................................... 6-16
Automatic Magnification Selection (AMS).............................................................. 6-17
Selecting a Special Ratio for Non-Standard Paper................................................ 6-18
Special Ratio Table................................................................................................ 6-19
Preset and User Set Ratios ................................................................................... 6-20
Zoom Mode............................................................................................................ 6-21
Vertical/Horizontal Zoom........................................................................................ 6-22
Copy Size...................................................................................................................... 6-23
Selecting Paper Type/Size for Multi-sheet Bypass Tray........................................ 6-24
Binding Mode ................................................................................................................ 6-27
Reserve.........................................................................................................................6-28
Set Reserve Job .................................................................................................... 6-28
Job Status Screen.................................................................................................. 6-30
Mishandled Paper During the Reserve Setting...................................................... 6-33
When Paper is Depleted for the Job in Progress................................................... 6-34
Store Mode.................................................................................................................... 6-35
Platen Store Mode ................................................................................................. 6-35
EDH Store Mode.................................................................................................... 6-37
Interrupt Mode............................................................................................................... 6-38
Rotation......................................................................................................................... 6-40
Rotation and APS .................................................................................................. 6-40
Rotation and AMS.................................................................................................. 6-41
To Release Automatic Rotation ............................................................................. 6-42
Check Mode and Proof Copy........................................................................................ 6-43
Help Mode..................................................................................................................... 6-46

Section 7: Output Modes
Output Mode for Machine with Finisher .......................................................................... 7-2
Primay (Main) Tray .................................................................................................. 7-2
Secondary (Sub) Tray.............................................................................................. 7-3
Non-Sort Mode Using Primary (Main) Tray.............................................................. 7-4
Sort Mode Using Primary (Main) Tray ..................................................................... 7-5
Staple-Sort Mode Using Primary (Main) Tray .......................................................... 7-6
Group Mode Using Primary (Main) Tray .................................................................. 7-9
Output Modes Using Secondary (Sub) Tray .......................................................... 7-10
Output Mode for Machine with Shift Tray...................................................................... 7-12
Folding and Stapling & Folding Modes ......................................................................... 7-14
Punch Mode.................................................................................................................. 7-17
Z-Folding Mode ............................................................................................................. 7-20
Three-Folding Mode...................................................................................................... 7-22
Cover Inserter E............................................................................................................ 7-24
Manual Finishing........................................................................................................... 7-27
Output Mode for Machine without Finisher ................................................................... 7-30
Face Down Exit...................................................................................................... 7-31
Face Up Exit .......................................................................................................... 7-34
Section 8: Special Original
Original Direction............................................................................................................. 8-2
Original Binding Mode..................................................................................................... 8-3
Text/Photo Enhance........................................................................................................ 8-4
Special Original............................................................................................................... 8-6
Mixed Original .......................................................................................................... 8-6
Z-Folded Original ..................................................................................................... 8-8
Original Form .................................................................................................................. 8-9
Section 9 : Applications
Application Function Menu.............................................................................................. 9-2
Sheet/Cover Insertion ..................................................................................................... 9-3
Chapter ........................................................................................................................... 9-8
Combination.................................................................................................................. 9-10
Booklet .......................................................................................................................... 9-12
Transparency Interleave ............................................................................................... 9-15
Image Insert .................................................................................................................. 9-17
Book Copy..................................................................................................................... 9-19
Program Job.................................................................................................................. 9-21
Non-Image Area Erase ................................................................................................. 9-23
Reverse Image.............................................................................................................. 9-25
Repeat Image................................................................................................................ 9-26
Frame/Fold Erasure ...................................................................................................... 9-29
AUTO Layout ................................................................................................................ 9-31
All-Image Area .............................................................................................................. 9-33

Image Shift.................................................................................................................... 9-34
To Adjust Position of Copy Image.......................................................................... 9-34
To Reduce and Shift Copy Image.......................................................................... 9-37
Stamp............................................................................................................................ 9-39
Overlay.......................................................................................................................... 9-44
Overlay Memory............................................................................................................ 9-46
To Store Overlaying Image Data in HDD............................................................... 9-46
To Overlay Image Stored in HDD .......................................................................... 9-49
Section 10 : Program Memory
Job Store....................................................................................................................... 10-2
Job Recall ..................................................................................................................... 10-4
Program Memory Form ................................................................................................. 10-6
Section 11: Network Function
To Use Server Function ................................................................................................ 11-2
Image Store/Delete Mode ............................................................................................. 11-4
To Store Image Data in HDD ................................................................................. 11-4
To Delete Image Data............................................................................................ 11-7
Image Store & Output Mode ......................................................................................... 11-8
Image Recall Mode ..................................................................................................... 11-10
To Use Web Utilities.................................................................................................... 11-12
Machine Information Mode.......................................................................................... 11-14
Job Status Mode ......................................................................................................... 11-15
HDD Job Information Mode......................................................................................... 11-16
Environment Setup Mode............................................................................................ 11-20
Setting E-Mail Transmission Function ................................................................. 11-20
Setting E.C.M. Function (Environment Setup) ..................................................... 11-22
Setting Scan Transmission Function ................................................................... 11-30
Transmitting/Editing Machine Setting File (Environment Setup).......................... 11-35
Section 12: Tandem Mode
Tandem Mode Operation .............................................................................................. 12-2
To Stop Scanning/Printing ............................................................................................ 12-5
Troubleshooting ............................................................................................................ 12-6
Section 9: Applications (continued)

Section 13 : Key Operator Mode
To the Key Operator...................................................................................................... 13-2
How to Access the Key Operator Mode................................................................. 13-3
System Initial Setting [1]................................................................................................ 13-4
Date & Time Setting [1].......................................................................................... 13-4
Language Select Setting [2]................................................................................... 13-6
IP Address Setting [3] ............................................................................................ 13-7
E-Mail Transmission Setting [4] ............................................................................. 13-9
Copier Initial Setting [2]............................................................................................... 13-11
User Setting Mode [3] ................................................................................................. 13-13
User Density Level 1 Setting [1]........................................................................... 13-13
User Density Level 2 Setting [2]........................................................................... 13-14
User Lens Mode Ratio Setting [3]........................................................................ 13-15
ECM (Electronic Copy Monitor) Function Setting [4]................................................... 13-16
How to Access the ECM Setting Mode ................................................................ 13-17
E.C.M. Data Edit [1] ............................................................................................. 13-18
E.C.M. All Count Reset [2] ................................................................................... 13-22
E.C.M. Function Setting [3] .................................................................................. 13-23
Lock/Delete Program Memory [5] ............................................................................... 13-24
Paper Type / Special Size Set [6] ............................................................................... 13-25
Panel Contrast / Key Sound Adjustment [7]................................................................ 13-27
Key Operator Data Setting [8] ..................................................................................... 13-28
Weekly Timer [9] ......................................................................................................... 13-29
How to Access the Weekly Timer Setting Mode .................................................. 13-30
Weekly Timer On/Off Setting [1] .......................................................................... 13-31
Timer Setting [2]................................................................................................... 13-32
Timer Action On/Off Setting [3] ............................................................................ 13-34
Lunch Hour Off Setting [4] ................................................................................... 13-36
Timer Interrupt Password Setting [5] ................................................................... 13-37
Control Panel Adjustment [10] .................................................................................... 13-38
Tray Auto Select Setting [11] ...................................................................................... 13-39
Energy Saver Setting [12] ........................................................................................... 13-40
Memory Switch Setting [13] ........................................................................................ 13-41
Machine Management List Print [14]........................................................................... 13-49
Call Remote Center [15].............................................................................................. 13-50
Side 2 Lens Adjustment [16] ....................................................................................... 13-51
Finisher Adjustment [17] ............................................................................................. 13-52
HDD Management Setting [18] ................................................................................... 13-54
Scan Transmission Setting [19] .................................................................................. 13-56
Non-Image Area Erase Setting [20] ............................................................................ 13-58
Background Adjustment [21] ....................................................................................... 13-59
Timing Adjustment [22] ............................................................................................... 13-60
Centering Adjustment [23]........................................................................................... 13-62
Key Operator ECM Form ............................................................................................ 13-64

Section 14 : Maintenance & Supplies
Loading Paper............................................................................................................... 14-2
Paper Indicator ( )................................................................................... 14-2
Paper Empty Indicator ( or )......................................................................... 14-2
Using the HELP Key .............................................................................................. 14-2
Loading Paper in Tray 1 and 2............................................................................... 14-3
Loading Paper in Tray 3 and 4............................................................................... 14-4
Loading Paper in LCC (C-403/C-404).................................................................... 14-5
Loading Tabbed Sheets in Tray 3, or 4.................................................................. 14-6
Loading Tabbed Sheets in LCC (C-403/C-404)..................................................... 14-7
Changing Paper Size of Tray 3 and 4.................................................................... 14-8
Adding Toner................................................................................................................. 14-9
Inserting a New Staple Cartridge into FN-121/FN-10 Finisher.................................... 14-10
Inserting a New Staple Cartridge into FN-115 Finisher............................................... 14-11
Empty Trash Basket of PK-2/PK-5/PK-5 (US 2 HOLES) Punch Kit............................ 14-12
Empty Trash Basket of ZK-3 Z-Fold Kit ...................................................................... 14-13
Preventive Maintenance.............................................................................................. 14-14
Reading the PM Counter ..................................................................................... 14-14
Printing the PM Counter....................................................................................... 14-14
Cleaning the Left Partition Glass................................................................................. 14-15
Cleaning the Document Glass and Inner Surface of the EDH .................................... 14-15
Section 15 : Troubleshooting
Call for Service.............................................................................................................. 15-2
Limited Use of the Copier in Trouble ..................................................................... 15-3
Memory Overflow .......................................................................................................... 15-4
Power OFF/ON Screen................................................................................................. 15-5
Clearing Mishandled Paper........................................................................................... 15-6
Copying Hints................................................................................................................ 15-8
Section 16 : Machine Specifications
Specifications ................................................................................................................ 16-2
Indicator ( )
Indicator ( or )

1-1
Section 1: Introduction
To the User ...........1-2
Product Overview ...........1-4
Features of the Di5510/Di7210 ...........1-6
Copier Features .........1-13

1-2
Introduction
To the User
Welcome to the Di5510/Di7210. The following topics relate to general product information
and provide tips on using this manual.
Key Operator Functions
Custom settings can be made by the Key Operator or anyone who is responsible for the
machine. Access to the Key Operator mode may require a key operator password, if
previously set by your authorized service representative. Use the password system to limit
use of Key Operator functions to a person who is authorized to handle the responsibility.
Copier Service, Repairs & Supplies
Copier service and repairs should be performed only by an authorized service
representative. To maintain personal safety and to avoid machine damage, never
disassemble the machine for any reason. To ensure optimal copy quality, use only supplies
that are recommended by Konica Minolta Business Technolojies Inc. For convenience, use
the form located at the end of Section 14: Maintenance & Supplies to record all service,
repair, and supply orders.
Machine Labels
Information labels are affixed to the copier to provide quick and easy instructions on basic
copying, loading paper, adding toner, and clearing mishandled paper. In addition, safety
labels are attached to various internal areas of the copier, to provide cautionary
information that must be heeded to prevent personal injury or damage to the copier.
Sample machine safety labels are shown in Section 2: Safety Information.
Control Panel with Interactive Touch Screen
The Di5510/Di7210 control panel is user friendly and easy to operate. The far right portion
of the panel displays the Copy/Scan/Print indicator and keys to select the mode as well as
the Timer indicator and buttons to select Energy Saver, Interrupt and Panel Reset modes.
Adjacent to this section is the keypad to select Print Quantity, Clear Quantity and Stop.
The next section on the left displays the keys to select Help, Program Memory, Mode
Check, Utility and Proof Copy modes. To the left is the LCD screen.
Copying modes, selections, and setting changes can be made from the touch screen. The
upper portion of the touch panel automatically displays machine status information, as
required. In addition, the [Help] key will display information on each function that is
displayed on the screen and will provide step-by-step instructions.

1-3
To the User (continued)
Introduction
Overview of the User’s Manual
For optimal performance, read this manual before using the copier. Be sure to handle the
machine and perform all copying operations only as recommended in the manual. Keep
the manual located with the machine so that all users may refer to it, as needed.
Manual Organization:
This manual includes sixteen topic sections as well as product specifications. Highlights
are as follows:
Section 1:General product information and features.
Section 2:Safety information to be read before operating this equipment.
Section 3:Machine information to be used as a reference when performing all copying
jobs, especially when capacities, sizes and weights are factors.
Section 4:Paper information to be used as a reference when performing all copying jobs.
Section 5:Copier management information to be read before operating this equipment.
Section 6:Information on using the touch screen and selecting basic copying functions.
Section 7:Information on output modes, including sort, staple-sort, group, face up, folding/
stapling & folding, three-folding, punch, Z-folding, cover sheet feed, and
manual finishing functions.
Section 8:Information on special original modes.
Section 9:Information on special application functions.
Section 10:Information on program memory functions.
Section 11:
Information on network functions.
Section 12:Information on tandem mode functions.
Section 13:Information on Key Operator functions for customizing the machine to suit your
working environment. The Key Operator mode should be used by an
authorized person.
Section 14:Information on maintaining this equipment and replenishing paper and toner.
Section 15:Troubleshooting information and instructions for clearing mishandled paper.
Section 16:Machine specifications for the main body and accessories.
Page Design:
The page layout of this manual is designed to help you perform each operation quickly and
easily. The basic format includes an introductory explanation of each function, step-by-
step procedures, and illustrations to enhance many of the procedures. Caution statements
specific to a topic are located on appropriate pages. Special notes are located at the
bottom of the page.
Help Mode
Help can be obtained for any function or mode that is displayed on the screen by pressing
the Help button on the control panel.

1-4
Introduction
Product Overview
The Di5510/Di7210 is a digital printer/copier that can be used as a stand-alone copier or
as a high-speed network printer when connected to the optional Pi7200e/Printer
Controller.
The Di5510/Di7210 can also be used as a print server on a network operating system.
Separate user’s manuals and installation instructions are included with the optional Pi-
7200e device.
Digital technology and memory capability of the Di5510/Di7210 provide many advantages
over the conventional photocopying process.
In conventional photocopying, a scanned image virtually remains intact as it is represented
on the drum and then copied onto the output media. While many conventional settings can
be made before outputting the copies to effect image reduction, lens adjustment, image
erasure and job store, etc., the conventional photocopying process cannot transform the
image into bits or store image data into memory.
In the Di5510/Di7210, a scanned image is electronically digitized into data bits that are
represented in code form and stored into memory. Stored data can be retrieved from
memory and output in various ways, as controlled by software. The digitized image is
represented as pixels on a screen or as dots per inch (dpi) on hard copy. The Di5510/
Di7210 resolves image in the copier/printer mode at 600 dpi.
Di5510/Di7210 digital technology enables you to:
• feed originals only once to make multiple copies, thereby preserving the condition of
originals
• store images in memory and perform Sheet/Cover insertion, Chapter, Combination,
Booklet, Image insert, Book copy, Program job, Mixed original, Repeat, Image shift,
Stamp/Overlay
• enhance photos, complex text image quality, and enhance lighter images
• reduce toner consumption and produce clean copies with Non-image area erase
• organize images into booklet format
• insert images scanned from the platen into a set scanned from the EDH (document
handler)
• check copying conditions and produce a proof copy before making multiple copied sets
• confirm the current machine status
• select offset-sort or offset-group output mode using optional Shift tray (OT-104)
• select offset-sort, offset-group, staple-sort, or punching output mode using optional
Finisher (FN-122)
• select offset-sort, offset-group, staple-sort, folding, or stapling & folding output mode
using optional Finisher (FN-121/FN-10/FN-115)
• select punching output mode using optional Finisher (FN-121/FN-10) with optional
Punch kit (PK-2/PK-5/PK-5 (US 2 HOLES))

1-5
Product Overview (continued)
Introduction
• select punching or Z -folding output mode using optional Finisher (FN-121/FN-10/FN-
115) with optional Z-Fold kit (ZK-3)
• set reserve jobs to make copies of different types in succession
• overlay stamp, watermark, or scanned images on the scanned originals
• store image data in HDD (option) for future printing

1-6
Introduction
Features of the Di5510/Di7210
• All-Image Area
Makes copies printed completely to the edges of the paper to avoid image loss.
• AES - Automatic Exposure Selection
Automatically adjusts exposure to compensate for quality of the original.
• AMS - Automatic Magnification Selection
Automatically selects an appropriate magnification ratio when Copy Size is selected
manually. Automatically selected when [AMS] key is touched.
• APS - Automatic Paper Selection
Automatically selects copy paper size to match the original documents.
• ATS - Automatic Tray Switching
Automatically switches trays to allow copying to continue without interruption if the
selected tray empties while copying is in progress.
• Auto Layout
The original image on the platen glass or in the EDH is copied and centered on a sheet.
• Auto Low Power
Automatically lowers the power after a specified period of copier inactivity.
• Auto Shut-Off
Automatically shuts off the main power after a specified period of copier inactivity.
•BookCopy
Copies both pages of an open book or book-size sheet separately onto two letter sheets in
1-1 mode or separately onto each side of one letter sheet in 1-2 mode. You can use the
Book Copy mode with the Front or Front/Back cover mode. The cover page(s) will be
scanned and copied normally before image division is performed on the other pages.
•Booklet
Creates letter R or ledger size booklets from letter size originals in 1-2 or 2-2 copy mode.
• Chapter
Starts chapter pages on the right side (front pages) of the finished document. Only duplex
mode (1-2) is compatible with this feature.
• Combination
Copies a fixed number (2, 4, or 8) of pages onto one sheet of copy paper.

1-7
Features of the Di5510/Di7210 (continued)
Introduction
• Copy Density
Manually selects up to 9 density levels.
•CopyMode
Selects the desired simplex mode (1-1 or 2-1); or duplex mode (1-2 or 2-2).
• Counter List
Displays on the screen and prints the following data: total counter of the machine, copier
counter, print counter and the date when the counter started.
• Density Shift
Shifts each of nine density levels in four density modes (Auto, Text, Photo, Increase
Contrast) to three levels lighter or three levels darker.
•EnergySaver
Automatically turns off all but nominal power supply after a specified period of copier
inactivity, for optimal efficiency. Power is returned after a brief warm up period by pressing
the [Energy Saver] key on the Control panel.
• Frame/Fold Erasure
Erases border and/or fold image area using Frame (1 - 300 mm), Fold (1 - 99 mm), or
Frame & Fold.
• HDD Store
While copying, stores image data in HDD (HDD-2) (option) for future printing.
• Image Insert
Stores pages in memory from the platen glass, and inserts the pages into a document
copied from the EDH.
• Image Rotation
Image Rotation rotates the image before copying when the portrait/landscape orientation
of the original is different from the orientation of the copy paper.
In 1-2 copy mode, Rotation arranges the even pages of simplex originals so that the
reverse sides of the duplex copies appear upside down.
In 2-1 copy mode, Rotation rearranges the reverse sides of duplex originals, when the
reverse side is upside down, so that they can be read as normal simplex copies.

1-8
Features of the Di5510/Di7210 (continued)
Introduction
•ImageShift
Creates or removes a binding margin at the top, bottom, right and left edges (shift amount
from 0 ~ 250 mm, in 1 mm increments); reduces image to prevent image loss (reduce &
shift amount from 0 ~ 250 mm, in 1 mm increments).
• Interrupt Copying
Interrupts copying in progress to perform copying from the platen glass.
• Job Status
Displays the Job Status Screen to view the machine status, changes the operation order of
reserve jobs, deletes the unused reserve job, or displays the previous job list.
• Lens Mode (Preset, Zoom)
Selects Preset ratios, four reduction and four enlargement ratios.
Zoom ratios can be selected from 25.0% ~ 400.0%, in 0.1% increments.
• Machine Status Confirmation
Displays the current machine status on LCD for confirmation.
• Magnification
Sets user-programmable ratios under User Set 1, User Set 2 and User Set 3.
• Manual Shut-off
Shuts off the main power when pressing [Energy Saver] key.
• Mixed Original
Copies mixed size originals from the EDH in APS or AMS mode. APS automatically
selects the copy size of each original. AMS mode allows you to select one paper size for
all originals.
• Network Function (option)
When the machine is connected to a PC over a network, it uses a web browser on the PC
to manage the stored data, to check the machine or job information, and to perform the
Key Operator settings concerning the network environment.
• Non-Image Area Erase
When copying from the platen glass when the document cover is open, copies only the
image area and not the exposed area of glass, which would otherwise copy as black.