Korenix JetNet 3810G Series User manual
5 Years Warranty
Each of Korenix’s product line is designed, produced, and tested with high industrial
standard. Korenix warrants that the Product(s) shall be free from defects in materials and
workmanship for a period of ve (5) years from the date of delivery provided that the
Product was properly installed and used.
is warranty is voided if defects, malfunctions or failures of the warranted Product are
caused by damage resulting from force measure (such as oods, re, etc.), other external
forces such as power disturbances, over spec power input, or incorrect cabling; or the
warranted Product is misused, abused, or operated, altered and repaired in an unauthorized
or improper way.
Attention! To avoid system damage caused by sparks, please DO NOT plug in power
connector when power is on.
e product is in compliance with Directive 2002/95/EC and 2011/65/EU of the European
Parliament and of the Council of 27 January 2003 on the restriction of the use of certain
hazardous substances in electrical and electronics equipment(RoHS Directives & RoHS 2.0)
Support
Korenix Customer Service
KoreCARE is Korenix Technology's global service center, where our professional stas are
ready to solve your problems at any time Korenix global service center's e-mail is
KoreCARE@korenix.com.
For more information and documents download please visit our website:
http://www.korenix.com/downloads.htm
Overview
A Beijer Electronics Group Company
JetNet 3810G / 3806G / 3710G
Quick Installation Guide v1.1
Grounding JetNet
Connecting grounding screw to the earth ground will ensure safety
and reduce the interference of noise.
2
Power supply:
Single 48V DC for PoE
Power consumption:
95W (incl. PoE), 30W
Note: For detail Power information,
Please refer to User’s Manual
PIN assignment—Power connector
Pin
1
2
Power Signal
VCC
GND
12
LED per unit
Power On/o x1 (Green on/o)
Alarm enable/ disable x1 (Red on/o)
PoE LED x8 (Green on/o)
LED per port
Link/Activity x10 (Green on/ blinking)
10/100-TX Full Duplex/ Collision x8
(Yellow on/ blinking)
10/100/1000-TX Speed x2
(Yellow blinking)
ME outline
1
2
Dimension (mm):
149(H) x 131(D) x 66(W)
Weight: 1.05kg
Operating temperature:
-25~70OC
Connect the power line
from the power supply
Indicators: Power on
(green on)
1
2
JetNet 3710G
PIN assignment—Power connector
Pin
1
2
Power Signal
VCC
GND
12
Power supply:
Single input 12~24V DC,
boosting to 48V DC for PoE
Power consumption:
80W (incl. PoE), 25W
Note: For detail Power information,
Please refer to User’s Manual
ME outline
1
Dimension (mm):
149(H) x 131(D) x 66(W)
Weight: 1.05kg
Operating temperature:
-25~60OC
Connect the power line
from the power supply
Indicators: Power on
(green on)
1
2
JetNet 3806G
LED per unit
Power On/o x1 (Green on/o)
Alarm enable/ disable x1 (Red on/o)
PoE LED x4 (Green on/o)
LED per port
Link/Activity x10 (Green on/ blinking)
10/100-TX Full Duplex/ Collision x4
(Yellow on/ blinking)
10/100/1000-TX Speed x2
(Yellow blinking)
Power supply:
Single input 12~24V DC,
boosting to 48V DC for PoE
Power consumption:
95W (incl. PoE), 30W
Note: For detail Power information,
Please refer to User’s Manual
PIN assignment—Power connector
Pin
1
2
Power Signal
VCC
GND
12
ME outline
1
2
Dimension (mm):
149(H) x 131(D) x 66(W)
Weight: 1.05kg
Operating temperature:
-25~60OC
Connect the power line
from the power supply
Indicators: Power on
(green on)
1
2
JetNet 3810G
LED per unit
Power On/o x1 (Green on/o)
Alarm enable/ disable x1 (Red on/o)
PoE LED x8 (Green on/o)
LED per port
Link/Activity x10 (Green on/ blinking)
10/100-TX Full Duplex/ Collision x8
(Yellow on/ blinking)
10/100/1000-TX Speed x2
(Yellow blinking)
Wiring the Relay Output
e relay output contacts are in the
Left of the terminal block connector.
By inserting the wires and settings the
DIP switch of the respective alarm
function to “ON”, relay output alarm
will detect port or power fault, and
form a short circuit.
Earth Ground
Extra Power
System
Alarm System
Dip Switch Setting
DIP Switches to congure Port Link Fail Alarm for GbE & PoE port
Note: e Pin No. of JetNet 3806G only DIP1~6 Default: o
Pin No. # 1 2
GbE port 2 1
Pin No. # 3 4 5 6 7 8 9 10
PoE port 1 2 3 4 5 6 7 8 910
1 2 3 4 5 6 7 8
ON
Installation
Package Check List
JetNet device
Attached 4-pin power terminal block
Quick installation guide
DIN rail Mount
e aluminum DIN rail attachment on the back of JetNet Device is
used to snap into the DIN rail plate
Interface
10/100 Base-TX
10/100/1000 Base-TX
PoE Injector
PoE Wiring Pins
JetNet 3710G
8
2
Port 1~8
4,5,7,8
Power Boost
JetNet 3810G
8
2
Port 1~8
4,5,7,8
12~24V Boost
JetNet 3806G
4
2
Port 1~4
4,5,7,8
12~24V Boost
5 Years Warranty
Each of Korenix’s product line is designed, produced, and tested with high industrial
standard. Korenix warrants that the Product(s) shall be free from defects in materials and
workmanship for a period of ve (5) years from the date of delivery provided that the
Product was properly installed and used.
is warranty is voided if defects, malfunctions or failures of the warranted Product are
caused by damage resulting from force measure (such as oods, re, etc.), other external
forces such as power disturbances, over spec power input, or incorrect cabling; or the
warranted Product is misused, abused, or operated, altered and repaired in an unauthorized
or improper way.
Attention! To avoid system damage caused by sparks, please DO NOT plug in power
connector when power is on.
e product is in compliance with Directive 2002/95/EC and 2011/65/EU of the European
Parliament and of the Council of 27 January 2003 on the restriction of the use of certain
hazardous substances in electrical and electronics equipment(RoHS Directives & RoHS 2.0)
Support
Korenix Customer Service
KoreCARE is Korenix Technology's global service center, where our professional stas are
ready to solve your problems at any time Korenix global service center's e-mail is
KoreCARE@korenix.com.
For more information and documents download please visit our website:
http://www.korenix.com/downloads.htm
Overview
A Beijer Electronics Group Company
JetNet 3810G / 3806G / 3710G
Quick Installation Guide v1.1
Grounding JetNet
Connecting grounding screw to the earth ground will ensure safety
and reduce the interference of noise.
2
Power supply:
Single 48V DC for PoE
Power consumption:
95W (incl. PoE), 30W
Note: For detail Power information,
Please refer to User’s Manual
PIN assignment—Power connector
Pin
1
2
Power Signal
VCC
GND
12
LED per unit
Power On/o x1 (Green on/o)
Alarm enable/ disable x1 (Red on/o)
PoE LED x8 (Green on/o)
LED per port
Link/Activity x10 (Green on/ blinking)
10/100-TX Full Duplex/ Collision x8
(Yellow on/ blinking)
10/100/1000-TX Speed x2
(Yellow blinking)
ME outline
1
2
Dimension (mm):
149(H) x 131(D) x 66(W)
Weight: 1.05kg
Operating temperature:
-25~70OC
Connect the power line
from the power supply
Indicators: Power on
(green on)
1
2
JetNet 3710G
PIN assignment—Power connector
Pin
1
2
Power Signal
VCC
GND
12
Power supply:
Single input 12~24V DC,
boosting to 48V DC for PoE
Power consumption:
80W (incl. PoE), 25W
Note: For detail Power information,
Please refer to User’s Manual
ME outline
1
Dimension (mm):
149(H) x 131(D) x 66(W)
Weight: 1.05kg
Operating temperature:
-25~60OC
Connect the power line
from the power supply
Indicators: Power on
(green on)
1
2
JetNet 3806G
LED per unit
Power On/o x1 (Green on/o)
Alarm enable/ disable x1 (Red on/o)
PoE LED x4 (Green on/o)
LED per port
Link/Activity x10 (Green on/ blinking)
10/100-TX Full Duplex/ Collision x4
(Yellow on/ blinking)
10/100/1000-TX Speed x2
(Yellow blinking)
Power supply:
Single input 12~24V DC,
boosting to 48V DC for PoE
Power consumption:
95W (incl. PoE), 30W
Note: For detail Power information,
Please refer to User’s Manual
PIN assignment—Power connector
Pin
1
2
Power Signal
VCC
GND
12
ME outline
1
2
Dimension (mm):
149(H) x 131(D) x 66(W)
Weight: 1.05kg
Operating temperature:
-25~60OC
Connect the power line
from the power supply
Indicators: Power on
(green on)
1
2
JetNet 3810G
LED per unit
Power On/o x1 (Green on/o)
Alarm enable/ disable x1 (Red on/o)
PoE LED x8 (Green on/o)
LED per port
Link/Activity x10 (Green on/ blinking)
10/100-TX Full Duplex/ Collision x8
(Yellow on/ blinking)
10/100/1000-TX Speed x2
(Yellow blinking)
Wiring the Relay Output
e relay output contacts are in the
Left of the terminal block connector.
By inserting the wires and settings the
DIP switch of the respective alarm
function to “ON”, relay output alarm
will detect port or power fault, and
form a short circuit.
Earth Ground
Extra Power
System
Alarm System
Dip Switch Setting
DIP Switches to congure Port Link Fail Alarm for GbE & PoE port
Note: e Pin No. of JetNet 3806G only DIP1~6 Default: o
Pin No. # 1 2
GbE port 2 1
Pin No. # 3 4 5 6 7 8 9 10
PoE port 1 2 3 4 5 6 7 8 910
1 2 3 4 5 6 7 8
ON
Installation
Package Check List
JetNet device
Attached 4-pin power terminal block
Quick installation guide
DIN rail Mount
e aluminum DIN rail attachment on the back of JetNet Device is
used to snap into the DIN rail plate
Interface
10/100 Base-TX
10/100/1000 Base-TX
PoE Injector
PoE Wiring Pins
JetNet 3710G
8
2
Port 1~8
4,5,7,8
Power Boost
JetNet 3810G
8
2
Port 1~8
4,5,7,8
12~24V Boost
JetNet 3806G
4
2
Port 1~4
4,5,7,8
12~24V Boost
5 Years Warranty
Each of Korenix’s product line is designed, produced, and tested with high industrial
standard. Korenix warrants that the Product(s) shall be free from defects in materials and
workmanship for a period of ve (5) years from the date of delivery provided that the
Product was properly installed and used.
is warranty is voided if defects, malfunctions or failures of the warranted Product are
caused by damage resulting from force measure (such as oods, re, etc.), other external
forces such as power disturbances, over spec power input, or incorrect cabling; or the
warranted Product is misused, abused, or operated, altered and repaired in an unauthorized
or improper way.
Attention! To avoid system damage caused by sparks, please DO NOT plug in power
connector when power is on.
e product is in compliance with Directive 2002/95/EC and 2011/65/EU of the European
Parliament and of the Council of 27 January 2003 on the restriction of the use of certain
hazardous substances in electrical and electronics equipment(RoHS Directives & RoHS 2.0)
Support
Korenix Customer Service
KoreCARE is Korenix Technology's global service center, where our professional stas are
ready to solve your problems at any time Korenix global service center's e-mail is
KoreCARE@korenix.com.
For more information and documents download please visit our website:
http://www.korenix.com/downloads.htm
Overview
A Beijer Electronics Group Company
JetNet 3810G / 3806G / 3710G
Quick Installation Guide v1.1
Grounding JetNet
Connecting grounding screw to the earth ground will ensure safety
and reduce the interference of noise.
2
Power supply:
Single 48V DC for PoE
Power consumption:
95W (incl. PoE), 30W
Note: For detail Power information,
Please refer to User’s Manual
PIN assignment—Power connector
Pin
1
2
Power Signal
VCC
GND
12
LED per unit
Power On/o x1 (Green on/o)
Alarm enable/ disable x1 (Red on/o)
PoE LED x8 (Green on/o)
LED per port
Link/Activity x10 (Green on/ blinking)
10/100-TX Full Duplex/ Collision x8
(Yellow on/ blinking)
10/100/1000-TX Speed x2
(Yellow blinking)
ME outline
1
2
Dimension (mm):
149(H) x 131(D) x 66(W)
Weight: 1.05kg
Operating temperature:
-25~70OC
Connect the power line
from the power supply
Indicators: Power on
(green on)
1
2
JetNet 3710G
PIN assignment—Power connector
Pin
1
2
Power Signal
VCC
GND
12
Power supply:
Single input 12~24V DC,
boosting to 48V DC for PoE
Power consumption:
80W (incl. PoE), 25W
Note: For detail Power information,
Please refer to User’s Manual
ME outline
1
Dimension (mm):
149(H) x 131(D) x 66(W)
Weight: 1.05kg
Operating temperature:
-25~60OC
Connect the power line
from the power supply
Indicators: Power on
(green on)
1
2
JetNet 3806G
LED per unit
Power On/o x1 (Green on/o)
Alarm enable/ disable x1 (Red on/o)
PoE LED x4 (Green on/o)
LED per port
Link/Activity x10 (Green on/ blinking)
10/100-TX Full Duplex/ Collision x4
(Yellow on/ blinking)
10/100/1000-TX Speed x2
(Yellow blinking)
Power supply:
Single input 12~24V DC,
boosting to 48V DC for PoE
Power consumption:
95W (incl. PoE), 30W
Note: For detail Power information,
Please refer to User’s Manual
PIN assignment—Power connector
Pin
1
2
Power Signal
VCC
GND
12
ME outline
1
2
Dimension (mm):
149(H) x 131(D) x 66(W)
Weight: 1.05kg
Operating temperature:
-25~60OC
Connect the power line
from the power supply
Indicators: Power on
(green on)
1
2
JetNet 3810G
LED per unit
Power On/o x1 (Green on/o)
Alarm enable/ disable x1 (Red on/o)
PoE LED x8 (Green on/o)
LED per port
Link/Activity x10 (Green on/ blinking)
10/100-TX Full Duplex/ Collision x8
(Yellow on/ blinking)
10/100/1000-TX Speed x2
(Yellow blinking)
Wiring the Relay Output
e relay output contacts are in the
Left of the terminal block connector.
By inserting the wires and settings the
DIP switch of the respective alarm
function to “ON”, relay output alarm
will detect port or power fault, and
form a short circuit.
Earth Ground
Extra Power
System
Alarm System
Dip Switch Setting
DIP Switches to congure Port Link Fail Alarm for GbE & PoE port
Note: e Pin No. of JetNet 3806G only DIP1~6 Default: o
Pin No. # 1 2
GbE port 2 1
Pin No. # 3 4 5 6 7 8 9 10
PoE port 1 2 3 4 5 6 7 8 910
1 2 3 4 5 6 7 8
ON
Installation
Package Check List
JetNet device
Attached 4-pin power terminal block
Quick installation guide
DIN rail Mount
e aluminum DIN rail attachment on the back of JetNet Device is
used to snap into the DIN rail plate
Interface
10/100 Base-TX
10/100/1000 Base-TX
PoE Injector
PoE Wiring Pins
JetNet 3710G
8
2
Port 1~8
4,5,7,8
Power Boost
JetNet 3810G
8
2
Port 1~8
4,5,7,8
12~24V Boost
JetNet 3806G
4
2
Port 1~4
4,5,7,8
12~24V Boost
5 Years Warranty
Each of Korenix’s product line is designed, produced, and tested with high industrial
standard. Korenix warrants that the Product(s) shall be free from defects in materials and
workmanship for a period of ve (5) years from the date of delivery provided that the
Product was properly installed and used.
is warranty is voided if defects, malfunctions or failures of the warranted Product are
caused by damage resulting from force measure (such as oods, re, etc.), other external
forces such as power disturbances, over spec power input, or incorrect cabling; or the
warranted Product is misused, abused, or operated, altered and repaired in an unauthorized
or improper way.
Attention! To avoid system damage caused by sparks, please DO NOT plug in power
connector when power is on.
e product is in compliance with Directive 2002/95/EC and 2011/65/EU of the European
Parliament and of the Council of 27 January 2003 on the restriction of the use of certain
hazardous substances in electrical and electronics equipment(RoHS Directives & RoHS 2.0)
Support
Korenix Customer Service
KoreCARE is Korenix Technology's global service center, where our professional stas are
ready to solve your problems at any time Korenix global service center's e-mail is
KoreCARE@korenix.com.
For more information and documents download please visit our website:
http://www.korenix.com/downloads.htm
Overview
A Beijer Electronics Group Company
JetNet 3810G / 3806G / 3710G
Quick Installation Guide v1.1
Grounding JetNet
Connecting grounding screw to the earth ground will ensure safety
and reduce the interference of noise.
2
Power supply:
Single 48V DC for PoE
Power consumption:
95W (incl. PoE), 30W
Note: For detail Power information,
Please refer to User’s Manual
PIN assignment—Power connector
Pin
1
2
Power Signal
VCC
GND
12
LED per unit
Power On/o x1 (Green on/o)
Alarm enable/ disable x1 (Red on/o)
PoE LED x8 (Green on/o)
LED per port
Link/Activity x10 (Green on/ blinking)
10/100-TX Full Duplex/ Collision x8
(Yellow on/ blinking)
10/100/1000-TX Speed x2
(Yellow blinking)
ME outline
1
2
Dimension (mm):
149(H) x 131(D) x 66(W)
Weight: 1.05kg
Operating temperature:
-25~70OC
Connect the power line
from the power supply
Indicators: Power on
(green on)
1
2
JetNet 3710G
PIN assignment—Power connector
Pin
1
2
Power Signal
VCC
GND
12
Power supply:
Single input 12~24V DC,
boosting to 48V DC for PoE
Power consumption:
80W (incl. PoE), 25W
Note: For detail Power information,
Please refer to User’s Manual
ME outline
1
Dimension (mm):
149(H) x 131(D) x 66(W)
Weight: 1.05kg
Operating temperature:
-25~60OC
Connect the power line
from the power supply
Indicators: Power on
(green on)
1
2
JetNet 3806G
LED per unit
Power On/o x1 (Green on/o)
Alarm enable/ disable x1 (Red on/o)
PoE LED x4 (Green on/o)
LED per port
Link/Activity x10 (Green on/ blinking)
10/100-TX Full Duplex/ Collision x4
(Yellow on/ blinking)
10/100/1000-TX Speed x2
(Yellow blinking)
Power supply:
Single input 12~24V DC,
boosting to 48V DC for PoE
Power consumption:
95W (incl. PoE), 30W
Note: For detail Power information,
Please refer to User’s Manual
PIN assignment—Power connector
Pin
1
2
Power Signal
VCC
GND
12
ME outline
1
2
Dimension (mm):
149(H) x 131(D) x 66(W)
Weight: 1.05kg
Operating temperature:
-25~60OC
Connect the power line
from the power supply
Indicators: Power on
(green on)
1
2
JetNet 3810G
LED per unit
Power On/o x1 (Green on/o)
Alarm enable/ disable x1 (Red on/o)
PoE LED x8 (Green on/o)
LED per port
Link/Activity x10 (Green on/ blinking)
10/100-TX Full Duplex/ Collision x8
(Yellow on/ blinking)
10/100/1000-TX Speed x2
(Yellow blinking)
Wiring the Relay Output
e relay output contacts are in the
Left of the terminal block connector.
By inserting the wires and settings the
DIP switch of the respective alarm
function to “ON”, relay output alarm
will detect port or power fault, and
form a short circuit.
Earth Ground
Extra Power
System
Alarm System
Dip Switch Setting
DIP Switches to congure Port Link Fail Alarm for GbE & PoE port
Note: e Pin No. of JetNet 3806G only DIP1~6 Default: o
Pin No. # 1 2
GbE port 2 1
Pin No. # 3 4 5 6 7 8 9 10
PoE port 1 2 3 4 5 6 7 8 910
1 2 3 4 5 6 7 8
ON
Installation
Package Check List
JetNet device
Attached 4-pin power terminal block
Quick installation guide
DIN rail Mount
e aluminum DIN rail attachment on the back of JetNet Device is
used to snap into the DIN rail plate
Interface
10/100 Base-TX
10/100/1000 Base-TX
PoE Injector
PoE Wiring Pins
JetNet 3710G
8
2
Port 1~8
4,5,7,8
Power Boost
JetNet 3810G
8
2
Port 1~8
4,5,7,8
12~24V Boost
JetNet 3806G
4
2
Port 1~4
4,5,7,8
12~24V Boost
5 Years Warranty
Each of Korenix’s product line is designed, produced, and tested with high industrial
standard. Korenix warrants that the Product(s) shall be free from defects in materials and
workmanship for a period of ve (5) years from the date of delivery provided that the
Product was properly installed and used.
is warranty is voided if defects, malfunctions or failures of the warranted Product are
caused by damage resulting from force measure (such as oods, re, etc.), other external
forces such as power disturbances, over spec power input, or incorrect cabling; or the
warranted Product is misused, abused, or operated, altered and repaired in an unauthorized
or improper way.
Attention! To avoid system damage caused by sparks, please DO NOT plug in power
connector when power is on.
e product is in compliance with Directive 2002/95/EC and 2011/65/EU of the European
Parliament and of the Council of 27 January 2003 on the restriction of the use of certain
hazardous substances in electrical and electronics equipment(RoHS Directives & RoHS 2.0)
Support
Korenix Customer Service
KoreCARE is Korenix Technology's global service center, where our professional stas are
ready to solve your problems at any time Korenix global service center's e-mail is
KoreCARE@korenix.com.
For more information and documents download please visit our website:
http://www.korenix.com/downloads.htm
Overview
A Beijer Electronics Group Company
JetNet 3810G / 3806G / 3710G
Quick Installation Guide v1.1
Grounding JetNet
Connecting grounding screw to the earth ground will ensure safety
and reduce the interference of noise.
2
Power supply:
Single 48V DC for PoE
Power consumption:
95W (incl. PoE), 30W
Note: For detail Power information,
Please refer to User’s Manual
PIN assignment—Power connector
Pin
1
2
Power Signal
VCC
GND
12
LED per unit
Power On/o x1 (Green on/o)
Alarm enable/ disable x1 (Red on/o)
PoE LED x8 (Green on/o)
LED per port
Link/Activity x10 (Green on/ blinking)
10/100-TX Full Duplex/ Collision x8
(Yellow on/ blinking)
10/100/1000-TX Speed x2
(Yellow blinking)
ME outline
1
2
Dimension (mm):
149(H) x 131(D) x 66(W)
Weight: 1.05kg
Operating temperature:
-25~70OC
Connect the power line
from the power supply
Indicators: Power on
(green on)
1
2
JetNet 3710G
PIN assignment—Power connector
Pin
1
2
Power Signal
VCC
GND
12
Power supply:
Single input 12~24V DC,
boosting to 48V DC for PoE
Power consumption:
80W (incl. PoE), 25W
Note: For detail Power information,
Please refer to User’s Manual
ME outline
1
Dimension (mm):
149(H) x 131(D) x 66(W)
Weight: 1.05kg
Operating temperature:
-25~60OC
Connect the power line
from the power supply
Indicators: Power on
(green on)
1
2
JetNet 3806G
LED per unit
Power On/o x1 (Green on/o)
Alarm enable/ disable x1 (Red on/o)
PoE LED x4 (Green on/o)
LED per port
Link/Activity x10 (Green on/ blinking)
10/100-TX Full Duplex/ Collision x4
(Yellow on/ blinking)
10/100/1000-TX Speed x2
(Yellow blinking)
Power supply:
Single input 12~24V DC,
boosting to 48V DC for PoE
Power consumption:
95W (incl. PoE), 30W
Note: For detail Power information,
Please refer to User’s Manual
PIN assignment—Power connector
Pin
1
2
Power Signal
VCC
GND
12
ME outline
1
2
Dimension (mm):
149(H) x 131(D) x 66(W)
Weight: 1.05kg
Operating temperature:
-25~60OC
Connect the power line
from the power supply
Indicators: Power on
(green on)
1
2
JetNet 3810G
LED per unit
Power On/o x1 (Green on/o)
Alarm enable/ disable x1 (Red on/o)
PoE LED x8 (Green on/o)
LED per port
Link/Activity x10 (Green on/ blinking)
10/100-TX Full Duplex/ Collision x8
(Yellow on/ blinking)
10/100/1000-TX Speed x2
(Yellow blinking)
Wiring the Relay Output
e relay output contacts are in the
Left of the terminal block connector.
By inserting the wires and settings the
DIP switch of the respective alarm
function to “ON”, relay output alarm
will detect port or power fault, and
form a short circuit.
Earth Ground
Extra Power
System
Alarm System
Dip Switch Setting
DIP Switches to congure Port Link Fail Alarm for GbE & PoE port
Note: e Pin No. of JetNet 3806G only DIP1~6 Default: o
Pin No. # 1 2
GbE port 2 1
Pin No. # 3 4 5 6 7 8 9 10
PoE port 1 2 3 4 5 6 7 8 910
1 2 3 4 5 6 7 8
ON
Installation
Package Check List
JetNet device
Attached 4-pin power terminal block
Quick installation guide
DIN rail Mount
e aluminum DIN rail attachment on the back of JetNet Device is
used to snap into the DIN rail plate
Interface
10/100 Base-TX
10/100/1000 Base-TX
PoE Injector
PoE Wiring Pins
JetNet 3710G
8
2
Port 1~8
4,5,7,8
Power Boost
JetNet 3810G
8
2
Port 1~8
4,5,7,8
12~24V Boost
JetNet 3806G
4
2
Port 1~4
4,5,7,8
12~24V Boost
5 Years Warranty
Each of Korenix’s product line is designed, produced, and tested with high industrial
standard. Korenix warrants that the Product(s) shall be free from defects in materials and
workmanship for a period of ve (5) years from the date of delivery provided that the
Product was properly installed and used.
is warranty is voided if defects, malfunctions or failures of the warranted Product are
caused by damage resulting from force measure (such as oods, re, etc.), other external
forces such as power disturbances, over spec power input, or incorrect cabling; or the
warranted Product is misused, abused, or operated, altered and repaired in an unauthorized
or improper way.
Attention! To avoid system damage caused by sparks, please DO NOT plug in power
connector when power is on.
e product is in compliance with Directive 2002/95/EC and 2011/65/EU of the European
Parliament and of the Council of 27 January 2003 on the restriction of the use of certain
hazardous substances in electrical and electronics equipment(RoHS Directives & RoHS 2.0)
Support
Korenix Customer Service
KoreCARE is Korenix Technology's global service center, where our professional stas are
ready to solve your problems at any time Korenix global service center's e-mail is
KoreCARE@korenix.com.
For more information and documents download please visit our website:
http://www.korenix.com/downloads.htm
Overview
A Beijer Electronics Group Company
JetNet 3810G / 3806G / 3710G
Quick Installation Guide v1.1
Grounding JetNet
Connecting grounding screw to the earth ground will ensure safety
and reduce the interference of noise.
2
Power supply:
Single 48V DC for PoE
Power consumption:
95W (incl. PoE), 30W
Note: For detail Power information,
Please refer to User’s Manual
PIN assignment—Power connector
Pin
1
2
Power Signal
VCC
GND
12
LED per unit
Power On/o x1 (Green on/o)
Alarm enable/ disable x1 (Red on/o)
PoE LED x8 (Green on/o)
LED per port
Link/Activity x10 (Green on/ blinking)
10/100-TX Full Duplex/ Collision x8
(Yellow on/ blinking)
10/100/1000-TX Speed x2
(Yellow blinking)
ME outline
1
2
Dimension (mm):
149(H) x 131(D) x 66(W)
Weight: 1.05kg
Operating temperature:
-25~70OC
Connect the power line
from the power supply
Indicators: Power on
(green on)
1
2
JetNet 3710G
PIN assignment—Power connector
Pin
1
2
Power Signal
VCC
GND
12
Power supply:
Single input 12~24V DC,
boosting to 48V DC for PoE
Power consumption:
80W (incl. PoE), 25W
Note: For detail Power information,
Please refer to User’s Manual
ME outline
1
Dimension (mm):
149(H) x 131(D) x 66(W)
Weight: 1.05kg
Operating temperature:
-25~60OC
Connect the power line
from the power supply
Indicators: Power on
(green on)
1
2
JetNet 3806G
LED per unit
Power On/o x1 (Green on/o)
Alarm enable/ disable x1 (Red on/o)
PoE LED x4 (Green on/o)
LED per port
Link/Activity x10 (Green on/ blinking)
10/100-TX Full Duplex/ Collision x4
(Yellow on/ blinking)
10/100/1000-TX Speed x2
(Yellow blinking)
Power supply:
Single input 12~24V DC,
boosting to 48V DC for PoE
Power consumption:
95W (incl. PoE), 30W
Note: For detail Power information,
Please refer to User’s Manual
PIN assignment—Power connector
Pin
1
2
Power Signal
VCC
GND
12
ME outline
1
2
Dimension (mm):
149(H) x 131(D) x 66(W)
Weight: 1.05kg
Operating temperature:
-25~60OC
Connect the power line
from the power supply
Indicators: Power on
(green on)
1
2
JetNet 3810G
LED per unit
Power On/o x1 (Green on/o)
Alarm enable/ disable x1 (Red on/o)
PoE LED x8 (Green on/o)
LED per port
Link/Activity x10 (Green on/ blinking)
10/100-TX Full Duplex/ Collision x8
(Yellow on/ blinking)
10/100/1000-TX Speed x2
(Yellow blinking)
Wiring the Relay Output
e relay output contacts are in the
Left of the terminal block connector.
By inserting the wires and settings the
DIP switch of the respective alarm
function to “ON”, relay output alarm
will detect port or power fault, and
form a short circuit.
Earth Ground
Extra Power
System
Alarm System
Dip Switch Setting
DIP Switches to congure Port Link Fail Alarm for GbE & PoE port
Note: e Pin No. of JetNet 3806G only DIP1~6 Default: o
Pin No. # 1 2
GbE port 2 1
Pin No. # 3 4 5 6 7 8 9 10
PoE port 1 2 3 4 5 6 7 8 910
1 2 3 4 5 6 7 8
ON
Installation
Package Check List
JetNet device
Attached 4-pin power terminal block
Quick installation guide
DIN rail Mount
e aluminum DIN rail attachment on the back of JetNet Device is
used to snap into the DIN rail plate
Interface
10/100 Base-TX
10/100/1000 Base-TX
PoE Injector
PoE Wiring Pins
JetNet 3710G
8
2
Port 1~8
4,5,7,8
Power Boost
JetNet 3810G
8
2
Port 1~8
4,5,7,8
12~24V Boost
JetNet 3806G
4
2
Port 1~4
4,5,7,8
12~24V Boost
910
1 2 3 4 5 6 7 8
ON
JetNet 3710G
PIN分配-供电端口
Pin
1
2
Power Signal
VCC
GND
12
ME outline
1
JetNet 3806G
电源供应: 输入12~24VDC, 升压至
48VDC PoE输出
功耗: 95W(包含PoE供电), 30W(不
含PoE供电)
注意: 详细的电源信息请参考使用手册
电源供应: 输入48VDC PoE输出
功耗: 95W(包含PoE供电), 30W(不
含PoE供电)
注意: 详细的电源信息请参考使用手册
电源供应: 输入12~24VDC, 升压至
48VDC PoE输出
功耗: 80W(包含PoE供电), 25W(不
含PoE供电)
注意: 详细的电源信息请参考使用手册
PIN分配-供电端口
Pin
1
2
Power Signal
VCC
GND
12
1
2
尺寸 (mm):
149(H) x 131(D) x 66(W)
净重: 1.05kg
工作温度: -25~60OC
将电源线接上电源供应器
指示灯: 电源开启 (绿灯亮)
1
2
尺寸 (mm):
149(H) x 131(D) x 66(W)
净重: 1.05kg
工作温度: -25~70OC
将电源线接上电源供应器
指示灯: 电源开启 (绿灯亮)
1
2
尺寸 (mm):
149(H) x 131(D) x 66(W)
净重: 1.05kg
工作温度: -25~60OC
将电源线接上电源供应器
指示灯: 电源开启 (绿灯亮)
1
2
ME outline
导言
产品清单
JetNet工业以太网交换机
附4-pin电源接线端子
快速安装向导
安装
介面
10/100 Base-TX
10/100/1000 Base-TX
PoE 供电
PoE 接线端子
JetNet 3710G
8
2
Port 1~8
4,5,7,8
Power 升压
JetNet 3810G
8
2
Port 1~8
4,5,7,8
12~24V Boost
JetNet 3806G
4
2
Port 1~4
4,5,7,8
12~24V Boost
安装
导轨安装: 将JetNet工业以太网交换机后面的导轨夹卡上导轨。
地线连接
在JetNet底部有一个地线连接螺丝。将JetNet地线螺丝接地，
可以确保设备使用安全，并可防干扰。设备未接地，因自然因
素造成损害，将不予以修复。
JetNet 3810G
系统LED
电源 On/o x1 (绿灯亮/熄灭)
报警 enable/disable x1 (红灯亮/熄灭)
PoE LED x8 (绿灯亮/熄灭)
端口LED
Link/Activity x10 (绿灯亮/闪烁)
10/100-TX Full duplex/ Collision x8
(黄灯亮/闪烁)
10/100/1000-TX Speed x2 (黄灯闪烁)
系统LED
电源 On/o x1 (绿灯亮/熄灭)
报警 enable/disable x1 (红灯亮/熄灭)
PoE LED x8 (绿灯亮/熄灭)
端口LED
Link/Activity x10 (绿灯亮/闪烁)
10/100-TX Full duplex/ Collision x8
(黄灯亮/闪烁)
10/100/1000-TX Speed x2 (黄灯闪烁)
继电器报警连接
继电器输出触点在产品底部接线端
子的左方。使用该界面连接报警系
统，并将DIP拨码开关置"ON"，继
电器报警输出系统就可以监视任意
端口或电源的断线情况，一旦发现
断线，自动形成一个闭合环路。
使用DIP拨码来设置千兆以太网口及供电端口的断线报警。
备注: JetNet 3806G的DIP拨码只有DIP1~6 默认值: o
Dip 拨码开关设置继电器报警
Pin No. # 1 2
GbE port 2 1
Pin No. # 3 4 5 6 7 8 9 10
PoE port 1 2 3 4 5 6 7 8
Earth Ground 报警系统
额外的
电源系统
PIN分配-供电端口
Pin
1
2
Power Signal
VCC
GND
12
ME outline
1
2
客户服务
5年质保
所有科洛理思产品的设计、制造及测试都是采用较高的工业标准。科洛理思保证
自产品出货日起提供最高5年之免费保修服务，保修期间如因零件损坏或制程不良
而导致产品故障，我们将提供免费维修服务。
Patent No. (Taiwan):
Granted Invention: I 313547
Granted Invention: I 321415
Granted Invention: I 344766
Granted Invention: I 346480
Granted Invention: I 356616
Granted Invention: I 364684
Granted Invention: I 376118
Granted Invention: I 393317
Granted Invention: I 398066
Granted Invention: I 398125
Utility Model: M 339841
Utility Model: M 339840
Tel:+886-2-89111000
Fax:+886-2-29123328
Business service:[email protected]
Customer service:[email protected]
www.korenix.com
CPQ000N3810003
Korenix Technology Co., Ltd.
(A Beijer Electronics Group Company)
然而，自然外力(火、水、雷灾)所造成的产品故障，或其它外部因素如电源干扰、
不当电源输入、不当接线等造成的损坏，不列入产品保固范围；此外，产品被误
用、未经授权的修理及修改等行为将造成保固条款失效。
注意! 请勿于电源开启时插拔接线端子，以避免产生火花造成系统损坏。
此产品保证完全符合欧盟2003年1月27日电气和电子设备危害物质限制委员会所提
出的限用指令2002/95/EC(ROHS禁令)及2011/65/EU(RoHS 2.0)。
Korenix 售后服务
KoreCARE 是科洛理思科技全球服务中心，我们专业的技术人员随时准备解答您
的疑问。科洛理思全球服务中心 EMAIL: KoreCARE@korenix.com
详细说明及文件请至网站下载: http://www.korenix.com.cn/support_downloads.htm
业务服务: sales@korenix.com.cn
官网: www.korenix.com.cn
系统LED
电源 On/o x1 (绿灯亮/熄灭)
报警 enable/disable x1 (红灯亮/熄灭)
PoE LED x4 (绿灯亮/熄灭)
端口LED
Link/Activity x10 (绿灯亮/闪烁)
10/100-TX Full duplex/ Collision x4
(黄灯亮/闪烁)
10/100/1000-TX Speed x2 (黄灯闪烁)
Other manuals for JetNet 3810G Series
2
Table of contents
Other Korenix Switch manuals
Korenix
Korenix JetNet 6710G User manual
Korenix
Korenix JetNet 5210G User manual
Korenix
Korenix JetNet 3808G Series User manual
Korenix
Korenix JetNet 4500 Series User manual
Korenix
Korenix JetNet 3810G Series User manual
Korenix
Korenix JetNet 5310G User manual
Korenix
Korenix JetNet 3005G User manual
Korenix
Korenix JetNet 6524G User manual
Korenix
Korenix JetNet 3906G User manual
Korenix
Korenix JetNet 5428G-20SFP Series User manual
Korenix
Korenix JetNet 5728G series User manual
Korenix
Korenix JetNet 3505 User manual
Korenix
Korenix JetNet 2205 Series User manual
Korenix
Korenix JetNet 3005 User manual
Korenix
Korenix JetNet 4508 V2 Series User manual
Korenix
Korenix JetNet 5428G Series User manual
Korenix
Korenix JetNet 5428G Series User manual
Korenix
Korenix JetNet 6710G User manual
Korenix
Korenix JetNet 3010G Series User manual
Korenix
Korenix JetNet 3018G Series User manual
Popular Switch manuals by other brands
Linksys
Linksys LGS116P Frequently asked questions
Siemens
Siemens SIMATIC NET SCALANCE X-100 operating instructions
Matrix
Matrix Tippkemper IRS I-OFX Series Original operating manual
KOA CCTV
KOA CCTV K5705 user manual
Avocent
Avocent SwitchView SwitchView 1000 Specifications
Cisco
Cisco Small Business 200 Series quick start guide
