Kramer RTBUS-27xl User manual

RTBUS-27xl Quick Start
P/N:
2900- 301349QS
Rev:
1
Scan for full manual
RTBUS-27xl Quick Start Guide
This guide helps you install and use your RTBUS-27xl for the first time.
Go to www.kramerav.com/manual/RTBUS-27xl to download the latest user manual
Step 1: Check What’s in the Box
RTBUS-27xl Round Table Connection Bus
1 Clamp set
1 User manual
1 Quick start guide
Step 2: Get to know your RTBUS-27xl
# Feature Function
1
Pneumatic Mechanism
Enables automatic lifting and smooth
closing of the lid.
2
Outer Rim
Fits over the table surface.
3
Lower Surface
Includes two pass-through openings.
4
Mounting Screws (x2)
For securing RTBUS-27xl to the table.
5
Locking Butterfly Nuts (x2)
Tighten to lock the mounting butterfly
screw.
6
Mounting Butterfly Nuts (x2)
Tighten to secure the unit to the table
surface.
7
Mounting Brackets (x2)
Place in the bracket slits after inserting the
enclosure into the table – for securing the
unit to the table surface.
8
Black anodized or brushed
aluminum semi-automatic lid
Covers the connecting surface, leaving
the table surface neat and tidy.
9
Upper Surface
Includes power socket opening.
10
Mounting Bracket Slits (two
sets on each side)
Insert the mounting brackets to the slits
when installing RTBUS-27xl.
11
Detachable Pass-through
Bracket
Remove and re-install to insert cables.
12 Pass-Through Opening and
Bushing (x2)
Insert a cable through the opening and the
bushing.
13
5A MAX. Power Socket
Connects to 90-240V AC power
consuming device.
14
Lid Latch
For safely closing the lid.
Step 3: Install RTBUS-27xl
To mount the unit, follow these steps:
1. Using any standard cup bit drill with a diameter ranging from 111mm to 114mm (4.37” to 4.49”), drill a hole in the table
in the desired location.
2. Install the power socket (purchased separately).
3. Remove the detachable bracket.

4. Insert the cables through the pass-through openings:
A
B
C
5. Mount RTBUS-27xl into the table:
A
B
C
6. Connect the cables:
Connect devices to the pass-through cables
and power socket.
Safety Instructions
Caution: There are no operator serviceable parts
inside the unit.
Warning: Do not open the unit. High voltages can
cause electrical shock! Servicing by
qualified personnel only.
Warning: Disconnect the power and unplug the unit
from the wall before installing.
See www.KramerAV.com for updated safety information.