Kramer WSP-1 User manual

Passive Wall Plate Connection Module: WSP-1
Congratulations on purchasing your Kramer passive wall plate connection module, which is
ideal for the following applications:
 Board, conference and training rooms
 Presentation systems
 Home theater
You can attach up to 3 (using the US version) or 4 (using the European version) of any of the
wall plate connection module devices from the passive WP Series to work with the WP Frame.
The WSP-1 is intended for the connection of loud speakers.
The WSP-1 is a passive wall plate connection module with a 4-pin (L+ L– R– R+)
connector on the front panel with clips to hold the wires securely in place, and a 4-pin
(L+ L– R– R+) connector on the rear panel with screws to fasten the wires in place:


The WSP-1 Front View:

The WSP-1 Rear View:


Typical WSP-1 Setup:
WSP-1

Passive Wall Plate

For the latest information on our products and a list of Kramer distributors, visit our
Web site: www.kramerelectronics.com




Kramer Electronics, Ltd.
Web site: www.kramerelectronics.com
E-mail: [email protected]om
P/N: 2900-000033 REV 1