Kramer PT-871 User manual

PT-871, PT-872 Quick Start (P/N: 2900-300940QS REV 4)
P/N:
2 9 0 0 - 3 0 0 9 4 0 QS
Rev:
4
Scan for full manual
PT-871, PT-872 Quick Start Guide
This guide helps you install and use your PT-871, PT-872 for the first time.
Go to www.kramerav.com/downloads/PT-871, PT-872 to download the latest user manual and check if
firmware upgrades are available.
Step 1: Check what’s in the box
PT-871, PT-872 HDMI 4K Line Transmitter/Receiver
4 Rubber feet (per unit)
1 Bracket set (per unit)
1 Power supply (12V DC)
1 Quick start guide
Step 2: Get to know your PT-871, PT-872
#
Feature
Function
LED Indicators
IN
Lights when an active source is connected to HDMI IN on the PT-871.
OUT
Lights when an active acceptor is connected to HDMI OUT on the PT-872.
ON
Lights when power is connected to the device.
HDMI IN Connector (PT-871)
HDMI OUT Connector (PT-872)
Connects to an HDMI source .
Connects to an HDMI acceptor.
DGKat-2.0 OUT RJ-45 Connector (PT-871)
DGKat-2.0 IN RJ-45 Connector (PT-872)
Connects to the DGKat-2.0 IN connector on the PT-872 using twisted pair cable.
Connects to the DGKat-2.0 OUT connector on the PT-871using twisted pair cable.
12V DC Connector
Connects to the unit’s power supply.
Step 3: Install the PT-871, PT-872
Install PT-871, PT-872 using one of the following methods:
Attach the rubber feet and place the unit on a flat surface.
Fasten a bracket (included) on each side of the unit and attach it to a flat surface.
For more information go to www.kramerav.com/downloads/PT-871, PT-872.
Mount the unit in a rack using an optional RK-4PT rack adapter.

Step 4: Connect the inputs and outputs
Always switch OFF the power on each device before connecting it to your PT-871, PT-872. For best results, we recommend that you
always use Kramer high-performance cables to connect AV equipment to the PT-871, PT-872.
Step 5: Connect the power
Connect the 12V power adapter to either PT-871 or PT-872 and plug it into the mains electricity. This device provides power to its
counterpart via DGKat 2.0. Each device can provide or accept power over cable (PoC) via DGKat 2.0.
Safety Instructions
Caution:
There are no operator serviceable parts inside the unit.
Warning:
Use only the Kramer Electronics power supply that is provided with the unit.
Warning:
Disconnect the power and unplug the unit from the wall before installing.
See www.KramerAV.com for updated safety information.
Technical Specifications
PT-871
PT-872
Inputs:
1 HDMI female connector
1 RJ-45 female connector
Outputs:
1 RJ-45 female connector
1 HDMI female connector
Transmitted Data Bandwidth:
Up to 18Gbps (6Gbps per graphic channel)
Standards Compliance:
HDMI 2.0, HDCP 2.2, DGKat 2.0
Reach Extension:
Up to 40m (130ft) at 4K60 (4:4:4 or 4:2:0) or 1080p resolutions, over Kramer DGKat 2.0
compliant copper cable
Indicator LEDs:
In, Out, On
Power Consumption:
12V DC, 530mA
12V DC, 530mA
Cooling
Convection ventilation
Operating Temperature:
0° to +40°C (32° to 104°F)
Storage Temperature:
-40° to +70°C (-40° to 158°F)
Humidity:
10% to 90%, RHL non-condensing
Dimensions:
6.22cm x 5.18cm x 2.44cm (2.45" x 2.0" x 1.0") W, D, H.
Weight:
0.07kg (0.15lbs)
Shipping Dimensions:
15.7cm x 12cm x 8.7cm (6.2" x 4.7" x 3.4") W, D, H.
Shipping Weight:
0.37kg (0.81lbs)
Included Accessories:
Power supply, bracket kit
Optional:
RK-4PT 19” rack mount