Kraus Britt KPF-1691 User manual

INSTALLATION GUIDE
www.kraususa.com I Toll Free: 1.800.775.0703 I © 2019 Kraus USA Inc. I REV. DEC 16, 2020
Single Handle Kitchen Faucet
KPF-1691
Britt™

Congratulations on the purchase of your new
Please keep the box and packaging materials until your product is
completely installed. If you have any questions, require technical
assistance, or have any problems with your product:
Please contact our Customer Service Team
1-800-775-0703 / [e-mail]
Have the model number available, and retain a copy of your receipt
with purchase date for reference.
If for any reason this product does not meet your expectations,
please be sure to repack this product in the original box and
packaging material to avoid damage during transit.
DO NOT RETURN TO STORE
1

Prior to Installation:
•Make sure you have all necessary parts by checking the diagram and parts list. If
any part is missing or damaged, please contact Kraus Customer Service at 800-775-
0703 for a replacement
•
•Pre-drilled countertop hole size requirement: 1-3/8”(min)
•Max countertop thickness: 3-1/8”
Tools you will need:
13
Wrench Phillips Screwdriver Safety Goggles
Silicone Sealant
(optional)
Pipe Tape
2
Turn o the hot and cold water lines at the angle stops and turn on the old faucet
to release any built-up pressure

3
A. Spray Head
C. Flange
D. Rubber Washer
F. Mounting Nut
B
Diagram and Parts List
G. Screws
K
H. Weight
C
B. Faucet Body
E. Metal Washer
D
E
F
G
I
J
I. Weight Clip
J. Quick Connector
K. Hex Wrench
H
A

4
Faucet Dimension
Installer Tip:
3/8”-compression
3 1/8"
[80.3mm]
22 1/4"
[565.4mm]
8 3/8"
[213.6mm]
10 5/8"
[268.9mm]
6 1/2"
[164.3mm]
4 1/4"
[108.8mm]
Ø2 1/8"
[54.2mm]

5
G
Step 1: Installing the faucet
Shut o the water supply. Place faucet (B)
through the hole in countertop.
Secure the faucet (B) to the countertop using
the rubber washer (D), metal washer (E) and
mounting nut (F) provided. Tighten screws (G).
Step 2: Securing the faucet assembly
Push the quick connector (J) rmly upward
and attach it to the receiving block (a). Pull
down moderately to ensure the connection
has been made.
D
E
G
B
F
a
J
(2N.m
Max)

Step 3: Securing the faucet assembly
Install the weight clip (I) at the point of
the hose marking "weight here". Insert
the weight (H) onto the weight clip (I)
by sliding it down onto the weight clip (I).
Step 4: Connect waterlines to main valve
6
Attach waterlines to angle stops
and tighten until snug. Turn on angles
stops and check for leaks (DO NOT TURN
FAUCET ON)
Weight
here
Weight
here
I
H

Step 5: Flush faucet
7
Pull the hose assembly out of the spout and
remove the spray head (A) by unscrewing it
from the hose in a counterclockwise direction.
Be sure to hold the end of the hose down into
the sink and turn the faucet on to the warm
position where it mixes hot and cold water.
Flush the water lines for one minute. This
Fushesaway any debris that could cause
damage to internal parts. Check for leaks.
Re-tighten any connections if necessary, but
do not overtighten. Reinstall the spray head (A)
by hand tightening it back onto the spray
hose.
After installation is completed, turn on the
hot and cold water supplies. Check for leaks.
NOTE: Please make sure washer is
installed attaching spray head to hose.
A

8
Replacement Parts
1. Sprayer Head
Replacement Parts List Part #
2. Washer
3. Inverter
5. Spring Assembly
6. Screw
7. Index
9. Bonnet Nut
10. Cap & O-ring
11. Handle
Finish / Color
KP27243
KP27084
KP27124
KP27083
KP27238
KP27239
KP27195
KP27208
KP27242
8. Cartridge
4. Sprayer Hose KP27244
12. Screw
KP27240
KP27001
SFACB, BB,
SFS,MB*
13. Index KP27002
*Denotes faucet component color options:
SFACB - Spot Free Antique Champagne Bronze; GR - Grey; BL - Black;
SFS - Spot Free Stainless Steel ; MB - Matte Black; BB - Brushed Brass;
Black hose with Spot-Free Antique Champagne Bronze (BLSFACB);
Black hose with Brushed Brass (BLBB); Black hose with Matte Black (BLMB);
Grey hose with Spot Free Stainless Steel (GRSFS)
SFACB, BB,
SFS,MB*
14. Hex Wrench
15. Flange & Washer
KP27020
16. Rubber & Metal Washer
KP27041
KP27028
17. Mounting Nut & Screw
18. Block
KP27079
19. O-Ring
KP27073
KP27092
20. 1.8GPM Flow Restrictor
21. Quick Connector
Assembly
KP27074-WH
KP27090
WHITE
6
7
1
8910
11
12
13
14
18
19
20
2
15
16
17
22
21
23
3
4
5
BL, GR*
22. Weight & Clip Assembly KP27212
23. Filter Washer KP27167
SFACB, BB,
SFS,MB*
BL, GR*
SFACB, BB,
SFS,MB*
BLSFACB, BLBB,
BLMB, GRSFS*
SFACB, BB,
SFS,MB*
BL, GR*

9
Troubleshooting
If you have followed the instructions carefully and your faucet still does not work
properly, take the following coorective steps:
Care & Maintenance
*To keep the product clean & shining, follow the steps below：
1. Rinse with clean water & dry with a soft cloth
2. Do not clean with soaps, acid, polish, abrasives, or harsh cleaners
3. Do not use cloth with a coarse surface
4. Unscrew the aerator and clean when necessary
*This installation manual is subject to change without further notice.
10
9
11
12 13
Hexagon Nut
Hot
Water
Cold
Water
Close
Open Left
Hot Water
Push
25˚ 90˚
PROBLEM CAUSE ACTION
Leakage under the
handle
Bonnet nut (9) has
come loose
Remove the index (13).
Loosen screw (12) with hex
wrench (14). Remove the
handle (11). Unscrew cap (10) (by
hand only). Tighten bonnet nut
(9) with an adjustable wrench
The aerator has an
irregular or reduced
water ow
The aerator is dirty or
mis-tted
Remove the aerator and
check for debris.
Ensure that the rubber
washer is properly installed.
Water will not shut o
completely
Cartridge may need to
be adjusted or replaced
Remove the index (13).
Loosen screw (12) with hex
wrench (14). Remove the
handle (11). Unscrew cap (10)
(by hand only). Tighten bonnet
nut (9) with an adjustable
wrench. Remove the cartridge
(8). Check for cracks
There is leaking from the
sink drain at the base of
the sink.
The sink has a rough or
irregular surface.
Apply additional silicone
sealant to the beveled side of
the drain ange. Retighten
and test for leaks
There is a low ow of
water.
The lter washer in the
hose connectors is dirty.
Turn o the water supply at
water valve and unscrew the
hose connectors from water
supply lines. Clean the lter
washer in the water lines with
hot water, removing any debris
or calcium build up