KSB BOAX-S User manual

Type series booklet
8417.1/5--10 BOAX-- S
Manual and electric control
PN 6/10/16
DN 20 to 600
Centred disc
butterfly valves
with elastomer liner
for Building services
ACS and DVGW approved
Applications
•Heating and air--conditioning water
•Drinking water
Working conditions
•Temperature range:
-- f r o m -- 1 0 °Cupto+130°C: E.P.D.M.--XU
-- f r o m -- 1 0 °Cupto+90°C: Nitrile--K
•Allowable pressure: max. 16 bar
•Differential pressure ∆p:
-- DN 20 to 200: 16 bar maxi at room temperature,
-- DN 250 to 600: 10 bar maxi at room temperature.
•Vacuum service down to 0,2 absolute bar.
•Maximum fluid velocity under PS: 4m/s for water
Materials
•Refer to page 2
Standard design
•Semi--lug type body (Type 2) with aligment holes allowing
downstream pipe dismantling under PS or dead--end service
•Extended neck allowing insulation.
•Thermally insulating device for easier fixation of thermal
insulating jacket onto base skirt.
•Elastomer liner: an extra volume of rubber, located at the shaft
passage, provides, by compression between the valve
body and the disc edge, a perfect leak--tightness at the shaft
passages.
•Spherical machined disc ensures perfect upstream/
downstream sealing: zero leakage visible to the naked eye
•Tightness towards the exterior, downstream/upstream
tightness and hydraulic testing in accordance with:
EN 12266--1/leak level A, ISO 5208 category A.
•Face to face dimensions in accordance with:
ISO 5752 -- 20, EN 558--1--20
•Mounting plate meeting the following standards: ISO 5211.
•Flange connection standard PN 6/10/16
•Marking in accordance EN 19
•Contains no asbestos, CFC, superchlorinated biphenylene,
substances impairing paint wetting.
•Polyurethane paint, 80 µthickness, colour orange ref.
RAL 2002.
•The valves meet the safety requirements of the pressure
Equipments Directive 97/23/EC (PED) appendix 1 for fluids
of the group 2.
Standard variant
•BOAXMAT--S valves with electrical actuators ACTELEC.
•Washed and packed without substances impairing paint
wetting.
Remark
•Operating instructions 8417.8--90
Data to be supplied when ordering
•BOAX--S series valves in accordance with type series
booklet 8417.1/5--10
•Size,
•Working conditions:
-- nature of fluid,
-- pressure,
-- temperature.
•Actuation.

BOAX-- S
2
Materials
Body KSB code
Type 2: Spheroïdal graphite cast iron JS 1030 3g
Shaft KSB code
Stainless steel 1.4029 (13 % Cr) 6k
Disc KSB code
Stainless steel 1.4301 type 18--12 6
AMRINGliner KSB code
E.P.D.M XU
High content nitrile K
Construction
DN 20 to 200
DN 20 and 25 DN 32 to 80 DN 100 to 150 DN 200
213
152
412
100
970
413
550
213
152
412
100
970
413
550
210
213
152
412
100
970
413
550
210
213
152
412
100
970
413
550
210
310.1
310.3
310.2
Item Designation DN Materials
100 Body 20 to 200 Spheroïdal graphite cast iron JS 1030
152 Thermal isolating device 20 to 200 Polyamid fiber glass filled
210 Shaft 20 to 200 13% Chromium stainless steel (1.4029)
213 Driving shaft 20 to 200 13% Chromium stainless steel (1.4029)
310.1 Plain bearing 200 PTFE filled on steel casing
310.2 Plain bearing 200 PTFE filled on steel casing
310.3 Plain bearing 200 PTFE filled on steel casing
412 O--Ring 20 to 200 E.P.D.M.
413 Liner 20 to 200 E.P.D.M.--XU or nitrile--K
5
5
0
D
i
s
c
2
0
t
o
2
0
0
S
t
a
i
n
l
e
s
s
s
t
e
e
l
T
y
p
e
1
8
-
-
1
2
(
1
4
3
0
1
)
5
5
0
D
i
sc
2
0
t
o
2
0
0
S
t
a
i
n
l
ess s
t
ee
l
,
T
ype
1
8
--
1
2
(
1
.
4
3
0
1
)
970 Identity plate 20 to 200 Adhesive polyester coated

BOAX-- S
3
Construction
DN 250 to 400
412
100
152
900.1
310.2
213
550
310.3
310.1
210
413
900.2
916
970
152
100
412
900.1
310.2
213
550
310.3
310.4
310.1
413
210
900.2
916
970
412
100
152
900.1
310.2
213
550
310.3
310.1
210
413
900.2
916
970
DN 250 DN 300 DN 350 and 400
Item Designation DN Materials
100 Body 250 to 400 Spheroïdal graphite cast iron JS 1030
152 Thermal isolating device 250 to 400 polyamid fiber glass steel
210 Shaft 250 to 400 13% chromium stainless steel (1.4029)
213 Driving shaft 250 to 400 13% chromium stainless steel (1.4029)
310.1 Plain bearing 250 to 400 PTFE filled on steel casing
310.2 Plain bearing 250 to 400 PTFE filled on steel casing
310.3 Plain bearing 250 to 400 PTFE filled on steel casing
310.4 Plain bearing 350 to 400 PTFE filled on steel casing
412 O--Ring 250 to 400 E.P.D.M.
413 Liner 250 to 400 E.P.D.M.--XU or nitrile--K
5
5
0
D
i
s
c
2
5
0
t
o
4
0
0
S
t
a
i
n
l
e
s
s
s
t
e
e
l
T
y
p
e
1
8
-
-
1
2
(
1
4
3
0
1
)
55
0
D
i
sc
2
5
0
to 4
0
0
S
t
a
i
n
l
ess s
t
ee
l
,
T
ype
1
8
--
1
2
(
1
.
4
3
0
1
)
900.1 Screw 250 to 400 Stainless steel
900.2 Screw 250 to 400 Stainless steel
916 Plug 250 to 400 Polyethylene
970 Identity plate 250 to 400 Adhesive polyester coated

BOAX-- S
4
Construction
DN 500 and 600
100
412
310.1
900.1
970
310.2
213
550
310.3
413
210
916
310.4
900.2
DN 500 and 600
400
Item Designation DN Materials
100 Body 500 and 600 Spheroïdal graphite cast iron JS 1030
210 Shaft 500 and 600 13% chromium stainless steel (1.4029)
213 Driving shaft 500 and 600 13% chromium stainless steel (1.4029)
310.1 Plain bearing 500 and 600 PTFE filled on steel casing
310.2 Plain bearing 500 and 600 PTFE filled on steel casing
310.3 Plain bearing 500 and 600 PTFE filled on steel casing
310.4 Plain bearing 500 and 600 PTFE filled on steel casing
400 Flat gasket 500 and 600 Polypropylene
412 O--Ring 500 and 600 E.P.D.M.
413 Liner 500 and 600 E.P.D.M.--XU or nitrile--K
5
5
0
D
i
s
c
5
0
0
a
n
d
6
0
0
S
t
a
i
n
l
e
s
s
s
t
e
e
l
T
y
p
e
1
8
-
-
1
2
(
1
4
3
0
1
)
55
0
D
i
sc 5
0
0
an
d
6
0
0
S
t
a
i
n
l
ess s
t
ee
l
,
T
ype
1
8
--
1
2
(
1
.
4
3
0
1
)
900.1 Screw 500 and 600 Stainless steel
900.2 Screw 500 and 600 Stainless steel
916 Plug 500 and 600 Polyethylene
970 Identification plate 500 and 600 Adhesive polyester coated

BOAX-- S
5
Valve without actuator
Overall dimensions (mm) and weights (kg)
d1d1 d1 d1
d1 d1 d1
h3
e2
e1
h4
l1
h1
h2
DN 20 to 65 DN 80 DN 100 DN 125 and 150
DN 200 DN 250 DN 300 DN 350 and 400
d1
ød4
Flat end s machined in Øz
ou s
d1 d1
DN 500 DN 600

BOAX-- S
6
Valve without actuator
Overall dimensions (mm) and weights (kg)
Face Mounting
p
l
a
t
e
I
S
O
F
l
a
t
s
h
a
f
t
e
n
d
S
q
uare shaft Disc
W
e
i
g
h
t
DN
F
a
c
e
to face p
l
a
t
e
I
S
O
5211
F
l
at s
h
a
f
ten
d
S
q
u
a
r
e
s
h
a
f
t
end
D
i
s
c
clearance
W
e
i
g
h
t
l1 d1 d4 h1 h2 N°h4 søz h3 sh3 e1 e2 kg
20 27 76 101 38 912 14 -- -- 0,5
25 27 84 104 42 912 14 15 20,6
32 27 101 108 51 912 14 31 50,9
40 33 108 60 126 54 F04 29,0 912 18 32 41,2
50 43 118 131 60 912 18 33 41,5
65 46 132 157 67 912 24 55 11 2,2
80 46 138 163 89 912 24 71 17 2,8
100 52 150
7
0
191 99
F
0
5
3
8
0
11 14 24 90 23 4,4
125 56 234 7
0
205 112
F
0
5
3
8
,
0
11 14 24 119 35 5,6
150 56 260
9
5
224 130
F
0
7
4
2
0
17 22 25 144 46 7,8
200 60 322
9
5252 161
F
0
7 4
2
,
0
17 22 25 196 69 11,9
250 68 394 133 275 197 F10 38,0 19 25 249 92 17,8
300 78 462 158 290 231 F12 28,5 22 29 297 111 32,0
350 78 538 183 338 269 F12 29,0 25 40 326 127 60,0
400 102 604 183 383 302 F14 29,0 36 50 370 140 80,0
500 127 716 -- 440 359 F14 29,0 36 55 478 178 145,0
600 154 836 -- 495 439 F16 29,0 40 65 566 215 220,0
Hydraulic characteristics
DN Flow coefficient valve in
fully open position kvo Zeta DN Flow coefficient valve in fully open position kvo Zeta
20 15 1,14 150 2600 0,12
25 40 0,39 200 5300 0,09
32 55 0,55 250 9900 0,06
40 65 0,97 300 11000 0,11
50 130 0,59 350 15900 0,09
65 275 0,38 400 20000 0,10
80 500 0,26 500 25000 0,16
100 750 0,28 600 36400 0,16
125 1650 0,14

BOAX-- S
7
Valve with manual actuation
Overall dimensions (mm) and weight (kg)
ø63
ød4
l2
h2
LP ¼turn handle operation -- Sizes 20 to 250 mm
h2
ød2
ød4
Manual gear reducer operation MA --
Sizes20to250mm
ABDC
h2
øE
Manual gear reducer operation MN and MR --
Sizes 300 to 600 mm
BOAX--S THERMAX:
Variant with thermometer
The thermometer mounted on the BOAX--S valve with handle
can measure the values between 0°C and + 120°C for an
heating installation and between -- 20°C and + 60°Cfora
cooling installation.
For DN 20 to 250, precision class = 1.
LP ¼turn handle operation
DN l2 h2 d4 Weight*
20 153 1,0
25 156 1,1
32 160 1,4
40 165 178 60 1,7
50 183 2,0
65 209 2,7
80 215 3,3
100
2
3
0
253
7
0
5,1
125
2
3
0
266 7
0
6,1
150
3
3
0
298
9
5
8,8
200
3
3
0
326
9
512,9
250 460 374 133 20,0
* The indicated weights are those of the valve + the handle
Manual gear reducer operation
DN
Type d2 h2 d4 Weight*
20 195 60 2,0
25 198 60 2,1
32 202 60 2,4
40 220 60 2,7
50 MA 12 140 225 60 3,0
65 251 60 3,7
80 257 60 4,3
100 285 70 5,9
125 299 70 7,1
150 355 95 10,8
200 MA 25 225 383 95 14,9
250
M
A
2
5
2
2
5
406 133 20,8
* The indicated weights are those of the valve + the actuator
Manual gear reducer operation
DN
Type A B C D ØE h2 Weight*
300 MN 40 70 225 60 60 225 350 35,4
350
M
N
8
0
9
0
2
4
5
7
0
7
5
2
2
5
416 64,6
400
M
N
8
0
9
0
2
45 7
0
75
2
2
5461 84,6
500 MR100 86 233 88 88 350 677 164,0
600 MR200 120 270 108 117 350 743 248,0
* The indicated weights are those of the valve + the actuator

BOAX-- S
8
BOAXMAT--S -- Valve with electric actuation
Actuator selection in lubricated medium
Single phase A. C. 230 V, 50 Hz
A
C
T
E
L
E
C
Standard
DN
A
C
T
E
L
E
C
S
t
a
n
d
a
r
d
Operating time
20
25
32
O
A
3
1
1
s
40
O
A
3
1
1
s
50
65
80
O
A
6
6
s
100
O
A
6
6
s
125 OA 8 6s*
150 OA 15 15 s *
200
A
S
2
5
1
0
s
*
250
A
S
2
5
1
0
s
*
300
A
S
5
0
3
0
s
*
350
A
S
5
0
3
0
s
*
400
B
S
1
0
0
6
0
s
*
500
B
S
1
0
0
6
0
s
*
*For other operating time, please consult us.
3--phase A. C. 400 V, 50 Hz
D
N
A
C
T
E
L
E
C
Standard
D
N
A
C
T
E
L
E
C
S
t
a
n
d
a
r
d
operating time
20
25
32
40
O
A
6
6
s
50
O
A
6
6
s
65
80
100
125 OA 8 6s*
150 OA 15 15 s *
200
A
S
2
5
1
0
s
*
250
A
S
2
5
1
0
s
*
300
A
S
5
0
3
0
s
*
350
A
S
5
0
3
0
s
*
400
B
S
1
0
0
6
0
s
*
500
B
S
1
0
0
6
0
s
*
*For other operating time, please consult us.

BOAX-- S
9
BOAXMAT--S -- Valve with electric actuation
Main electrical equipments
ACTELEC OA 3 OA 6 OA 8 OA 15 AS 25 AS 50 BS 100
Opening and closing
limit switches Standard
Adjustable extreme position
mechanical stops Standard
Opening and closing
torque limit switches Standard
Thermic switch integrated
in the winding Standard
Manual override Standard
Mechanical limit switch position Standard
Electrical characteristics (for standard operating time)
A
C
T
E
L
E
C
Single phase A. C. 230 V, 50 Hz
A
C
T
E
L
E
C
OA3 OA6 OA8 OA15 AS25 AS50 BS100
Nominal intensity (A) 0,7 0,6 1,2 0,6 1,8 1,2 1,2
Starting intensity (A) 0,9 0,9 1,7 0,9 2,5 1,7 1,7
Power (W) 27 30 60 30 100 60 60
A
C
T
E
L
E
C
t
y
p
e
3--phaseA.C.400V,50Hz
A
C
T
E
L
E
C
t
ype OA 6 OA 8 OA 15 AS 25 AS 50 BS 100
Nominal intensity (A) 0,3 0,6 0,3 0,8 0,3 0,6
Starting intensity (A) 0,5 1,1 0,5 1,6 0,8 1,1
Power (W) 30 100 30 150 60 100
•Rated current:
-- single phase A. C.230 V, 50 Hz: all types,
-- 3--phase A. C. 400 V, 50 Hz: all types except OA 3
•Intermittent duty:
-- S4--20 % for OA 3,
-- S4--30 % for OA 6 to BS 100
•Protection degree: IP 67
•Working temperature from -- 20°Cto+70°C
•On request:
-- Explosion--proof protection,
-- Additional adjustable contacts,
-- Electrical motor with built--in thermal protection and
epoxy paint finish,
-- Regulation function,
-- Feed--back position,
-- Potentiometer,
-- Control boxes,
-- Other voltages.
Please consult us.

BOAX-- S
10
BOAXMAT--S -- Valve with electric actuation
Overall dimensions (mm) weight (kg)
d2
b1b2
h2
l3 l2
2PE 16
d3
2PE 16
b2
d2
b1
d3
l3 l2
h2
l3 l2
2PE16
l1
b1b2
d3
h2
h1
OA 3
OA 6, OA 8 and OA 15
AS 25, AS 50 and BS 100

BOAX-- S
11
BOAXMAT--S -- Valve with electric actuation
Overall dimensions (mm) and weight (kg)
W
e
i
g
h
t
*
DN ACTELEC
W
e
i
g
h
t
*
l1 h1 h2 b1 b2 d2 d3 l2 l3 kg
20 27 101,0 346 5,5
25 27 104,0 349 5,6
32
O
A
3
27 108,0 353
5
9
1
3
4
6
0
9
0
9
3
5,9
40
O
A
3
33 126,0 371 5
9
1
3
4--
6
0
9
0
9
3
6,2
50 43 131,0 376 6,5
65 46 157,0 402 7,7
20 27 101,0 317 6,2
25 27 104,0 320 6,3
32 27 108,0 324 6,6
40
O
A
6
33 126,0 342
2
0
0
9
0
1
0
6
6
0
1
4
5
6
5
6,9
50
O
A
6
43 131,0 347
2
0
0
9
0
1
0
6
6
0
1
45
6
57,2
65 46 157,0 373 7,9
80 46 163,0 379 8,5
100 52 191,0 389 10,1
125 OA 8 56 205,0 420 200 90 106 60 145 65 12,4
150 OA 15 56 224,0 439 260 112 106 100 145 65 15,3
200
A
S
2
5
60 252,0 429
3
1
2
1
8
7
1
3
9
1
6
5
2
2
6
8
9
29,9
250
A
S
2
568 275,0 452
3
1
2
1
8
7
1
3
9
1
6
5
2
2
6
8
9
35,8
300
A
S
5
0
78 289,5 467
3
4
0
1
8
7
1
3
9
2
5
0
2
2
6
8
9
50,0
350
A
S
5
0
78 338,0 515
3
4
0
1
8
7
1
3
9
2
5
0
2
2
6
8
9
78,0
400
B
S
1
0
0
102 383,0 550
3
9
2
1
8
7
1
3
9
2
5
0
2
8
4
1
3
4
100,0
500
B
S
1
0
0
127 440 359
3
9
2
1
8
7
1
3
9
2
5
0
2
8
4
1
3
4175,0
* The indicated weights are those of the valve + the actuator
Installation instructions:
The BOAXMAT--S are factory preset and tested, do not
modify them.
Prior to any actuation, position the valve at mid course,
check its rotation direction and check the stroke limiting
stops for correct operation.
The BERNARD service leaflets as well as the electrical
wiring diagrams are supplied.
Integral protection of the motor is ensured when the
thermal switch included in the winding is properly
connected.
The actuators are disabled by the stroke limiting stops.
The torques limiters on versions AS and BS are safety
contacts.
In case of disturbance, they stop the motor via the control
box and the same time display the problem.
The torques limiters are contacts with a limited usable life.

BOAX-- S
12
Thermal insulator dimensions a and sizes of flange coupling screws in case of bolted assembly
Flanges according to
DN EN 1092 (PN 6) EN 1092 (PN 10) EN 1092 (PN 16)
D
N
aScrew size aScrew size aScrew size
20 48,5 4xM10x75 41,0 4xM12x80 41,0 4xM12x80
25 46,5 4xM10x75 39,0 4xM12x80 39,0 4xM12x80
32 40,5 4xM12x80 30,5 4xM16x85 30,5 4xM16x85
40 53,5 4xM12x80 43,5 4xM16x85 43,5 4xM16x85
50 53,5 4xM12x90 41,0 4xM16x100 41,0 4xM16x100
65 69,5 4xM12x90 57,0 4xM16x100 57,0 4xM16x100
80 60,5 4xM16x100 55,5 8xM16x110 55,5 8xM16x110
100 59,0 4xM16x110 54,0 4xM16x110 54,0 8xM16x110
125 58,0 8xM16x115 53,0 4xM16x120 53,0 8xM16x120
150 62,5 8xM16x115 52,5 8xM20x130 52,5 8xM20x120
200 63,0 8xM16x125 53,0 8xM20x130 53,0 12xM20x130
250 73,5 12 x M 16 x 135 63,5 12 x M 20 x 150 58,5 12xM24x150
300 64,5 12 x M 20 x 150 62,0 12 x M 20 x 160 54,5 12xM24x160
350 87,5 (10xM20x180)+(12xM20x55) 80,0 (10xM24x195)+(12xM24x65)
400 102,5 (10xM24x210)+(12xM24x65) 95,0 (10xM27x230)+(12xM27x70)
500 105,0 (12xM24x261)+(16xM24x70) 82,5 (12xM30x289)+(16xM30x80)
600 105,0 (10xM27x302)+(20xM27x75) 75,0 (10xM33x334)+(20xM33x90)
If threaded rods or studs are used, add at least one nut length to the above--mentioned screw lengths.
b
a
BOAX--S “A” BOAX--S “B”
Minimum deviations on distributor
The minimum deviations between the distribution loops are
defined by the requirements applicable to heating
installations, regardless of the control handles or reduction
gears used.
Minimum deviations b (mm)
BOAX--S “A”
DN 20 25 32 40 50 65 80 100 125 150 200 250 300 350 400 500 600
20 240 240 245 265 270 295 300 310 325 340 370 405 430 484 530 610 670
25 245 250 265 270 295 305 310 325 340 370 410 430 487 532 612 672
32 255 270 275 300 305 315 330 345 370 415 435 491 536 618 678
40 290 295 320 325 335 345 365 390 430 455 510 554 635 695
50 300 325 330 340 350 370 400 435 460 514 560 640 700
65 350 355 365 380 395 425 460 485 540 585 665 725
80 365 370 385 400 430 470 490 546 591 673 733
100 380 395 410 440 475 500 554 600 680 740
BOAX--S “B” 125 410 425 450 490 515 570 614 695 755
B
O
A
X
S
B
150 440 470 510 530 585 630 710 770
200 500 540 560 619 658 740 800
250 575 600 651 696 778 838
300 620 675 720 800 860
350 730 775 855 915
400 820 900 960
500 980 1040
600 1100

BOAX-- S
13
End of line and downstream dismantling
Use as end of line and downstream dismantling of the standard valves at room temperature for DN and the differential pressure (∆PS)
defined hereafter:
Gas or liquids Liquids*
hazardous** non hazardous** hazardous** non hazardous**
All DN: non allowed
DN ≤200: ∆PS = 10 bar max.
DN 250 to 500:
∆PS = 7 bar max.
Upper DN: on request
DN ≤200: ∆PS = 10 bar max.
DN 250 to 500:
∆PS = 7 bar max.
Upper DN: on request
DN ≤200: ∆PS = 12 bar max.
DN250to500:
∆PS = 7 bar max.
Upper DN: on request
* Liquids having a vapour pressure at the maximum allowable temperature of not more than 0,5 bar above normal atmospheric pressure
1013 mbar.
** Fluids hazardous and not hazardous according to PED.
Nota : A valve fitted at the end of a pipe with a blind flange downstream is not to be considered as an end of pipe service.
The BOAX--- S valve is fitted between pipe flanges by tie--rods, without gasket.
It is bi--directional and can be mounted in all positions.
Downstream dismantling End of line mounting
Heat insulation
The extended neck and the thermal isolating device allow for easy
clamping of an insulating jacket..
Pipe isolating jacket Jacket two parts
Thermal
isolating
device
Clampings rings

BOAX-- S
14
Notes

BOAX-- S
15
Notes

BOAX-- S
Product features -- to our customers’ benefit
Option: Thermometer (accuracy class: 1)
BOAX--S THERMAX :
DN 80
Wafer type body with tapped lugs
•Possibility of end of line and downstream dismantling..
•Small overall dimensions.
•Possibility of mounting between flanges PN 6/10/16.
•Possibility of thermal insulation in accordance with
the requirements applicable to heating installations. BOAX-- S
DN 125
Reducer
•Possibility of mounting in the open air owing to its
protection class IP 67.
•Small size, hence reduced overall dimensions.
Padlockable and/or lead sealable control
handle (DN 20--250)
•Low--cost installation
•No tightness problem,
•No disruption of heat insulating jacket..
Disc with spherical machining
•Ensures permanent tightness
at shaft passage way.
•Quick and easy installation of
thermal insulating jacket.
•No thermal loss.
•No condensation water.
Thermal isolating device
•Safety against unauthorized operation
07.12.05 This leaflet is not contractual
and may be amended without notice
8417.1/5--10