KUHL FC 303 GL User manual

PREDELIVERY
INSTRUCTIONS
FC 303 GL / RGL
N° 95132 B.GB - 02.2004

- 1 -
TO THE DEALER
Thefollowingmanualprovidesinstructionsonhowtounloadandassemblethemachine.
Foryoursafetyandthegoodoperationofthemachine,followtheinstructionsgiveninthismanual.
All applicable general safety measures and regulations aimed at preventing accidents must
alsobefollowed.
This symbol is used throughout this manual every time recommendations
are made concerning your safety and the safety of others.
Donotwearlooseclothing which could become caughtupinmovingelements.
Wearappropriateindividual protection equipment correspondingtothe work which isplanned
(gloves,shoes,eyeprotection,helmet,etc…)
Useeitheraliftingdevicefittedwithahook(hoist,crane,etc)havingaloadcapacitysuperiorto
themachineweight oraforklifttruck oratractorfittedwithafrontendloaderwithforks nolonger
than1.20m(4’)andwitha minimal lift capacity of3000daN(6615lbs.)at0.60m (24”)fromthe
fork heels or 1500 daN (3307 lbs.) at 1.20m (4’).
Use slings with a sufficient capacity, and that are in good condition and well protected against
sharpedges(nevermakeslipknots with chain type slings).
To operate the machine safely, refer to the operator’s manual supplied with
the machine.

- 2 -
CONTENTS
TECHNICALSPECIFICATIONS.......................................................................................3
REMOVALOF UNASSEMBLED COMPONENTS ...........................................................5
TILTINGTHEMACHINE/PALLETASSEMBLY ...............................................................10
Tilting the machine/palletassemblyusing a liftingdevicefittedwitha hook......................10
Using a lifting device fitted with forks which do not exceed 1.20 m / 3’11’’length............. 12
MACHINEASSEMBLY ..................................................................................................13
SAFETY DECALS.........................................................................................................30
Copyright2004KUHNS.A.

- 3 -
TECHNICAL SPECIFICATIONS
Mower Conditioners FC 303 GL FC 303 RGL
Workingwidth 3,00 m / 9’10”
Numberofdiscs 6
Numberofknivesperdisc 2
Discspeed(rotationalfrequency) 2610rpm(min-1)
Cuttingheight 26 to 100 mm
Conditioningsystem Pivotingfingers CHEVRON
andadjustable rollers
comb
Conditioningwidth 2,20 m / 7’3”
Conditionerspeed(rotationalfrequency) 1000rpmand 660rpm(min-1) 850rpm
Swath width (min / max) 0,80 m / 1,80 m-2’7" / 6’
Hourly work rate at 10 km/h (6 mph) 3 ha/7.5 acres
Transportwidth 3 m/ 9’10”
Overalllengthintransportposition 5,54m/18’2”
Overallheightintransportposition 1,50m/ 4’11”
Tyres 11.5/80-15.3
Tyrepressure 3 bars - 40 psi
Weight 2120 kg/ lbs 2200kg/lbs
OPTIONAL EQUIPMENT
Swathshieldforoffsetswating 1096020
Wide spreading kit 1096110
TRACTOR SPECIFICATIONS REQUIRED
MinimumPTOpowerrequirement(kW/hp) 58,5(80)
Hydraulicconnections 1singleacting outlet (for raising/lowering the unit)
1doubleactingoutlet (for shifting the tongue)
Electricalrequirement 7-pinISO or SAE plugforlighting
PTOinaccordance with ISO 500 standards Type 2: diameter 35 mm(1-3/8”)6 or 21 spline
PTOspeed(rotational frequency) 1000rpm(min-1)
Attachmentin accordancewithISO730standards 3-pt lift equipped with a system for locking the lift
arms laterally Category 2 or 3

- 4 -
TECHNICAL SPECIFICATIONS