Kuppersberg TG 699 User manual

TG 699
TG 69
TS 69
TS 79
TG 79
TG 799
TS 63
TS 39
TG 39
TS 99
TG 99
FQ4TG
FV3TG
FQ3TG
FQ7TG
TS 63E
TG 49

CONTENTS
1. APPEAL TO THE CUSTOMER........................................................1
2. CHILDREN’S SAFETY.....................................................................2
3. IMPORTANT SAFETY INSTRUCTION ............................................ 2
4. ENVIRONMENTAL PROTECTION ..................................................5
5. BEFORE USING YOUR APPLIANCE FOR THE FIRST TIME ......... 7
6. MAINTENANCE AND INSTALLATION MANUAL............................. 8
6.1. SAFETY INSTALLATION..........................................................8
6.2. INSTALLING THE APPLIANCE ................................................9
6.3. ELECTRICAL CONNECTION ................................................. 13
6.4. GAS CONNECTION................................................................ 14
6.5. ADJUSTMENT OF HOB PER GAS TYPES ............................ 15
6.6. STARTING THE APPLIANCE ................................................. 17
6.7. TECHNICAL CHARACTERISTIC AND DRAWINGS.............. 18
6.8. TECHNICAL INFORMATION ON GAS BURNERS ................ 20
7. CONTROL TYPES AND USE ....................................................... 21
7.1. CONTROL PANEL ................................................................. 21
7.2. BASIC SETTINGS .................................................................. 23
7.2.1. FOR GAS BURNERS ................................................... 23
7.2.2. FOR HOT-PLATE BURNERS....................................... 24
7.3. BASIC FUNCTION ................................................................. 25
8. MAINTENANCE AND CLEANINGS .............................................. 29
9. TROUBLESHOOTING................................................................... 31

1. APPEAL TO THE CUSTOMER
Our Valued Customer,
Thank you for your purchase of our product.
Please read all instructions and warnings in this
manual carefully. This manual includes the
important information about safe installation, usage
and maintenance and the required warnings for
your utilization of your equipment.
Please keep this manual at a safe and easily
accessible place to be used as future reference.
The Producer may not be held liable for the losses
to human, environment or other materials arisen
from the faulty use of the equipment arisen from the
translation or printing of this manual.

2
2. CHILDREN’S SAFETY
xThe exposed parts of the product shall be heated during and
after the use; the children should be kept away.
xDo not place any object on the unit that the children may
reach.
xPackaging materials may be dangerous for children. Keep the
packaging materials in a place that the children may not reach
or classify and recycle them as per the waste instructions.
xIf constant supervision may not be provided the children under
age 8 shall be kept away of the unit.
xThis unit may be used by children over 8 years old and the
persons with lack of physical, hearing or mental abilities or
lack of experience and information, subject to guidance and
supervision or utilization of the unit safely and recognition of
the dangers.
xChildren should not play with the unit.
xCleaning and maintenance of the unit should not be conducted
by the children without supervision.
3. IMPORTANT SAFETY INSTRUCTION
This device is produced for domestic use. Our firm is not liable
for any losses or damages which may occur due to wrong or
faulty installation.
Although this is a simple use product, we recommend you to
read this manual carefully. In this sense, you may get best
performance from your device and protect yourself and your
surrounding from the possible dangers.
Please consider the following warnings in order to minimize the
risks which may be experienced by you in utilization of the
devices such as electric shock, circumstances which may cause
losses/ damages to people.

3
xDevice is set to 220 -240 volt.
xWARNING: The equipment and its accessible parts are hot
during use.
xBest care should be used to avoid contacting with the heating
elements.
xWARNING: Cooking with vegetable oil or fat without required
care may be dangerous and may cause fire.
xDo not attempt to extinguish any fire with water, the circuit of
the equipment is closed and then the flame is covered with a
cover or flame blanket.
xWARNING: Fire Danger: Do not store materials on cooking
surface.
xThe accessible parts may be hot during utilization.
xDo not ever clean your hob by using steam cleaners.
xThe equipment is designed to be operated with an external
timer or a separate remote control.
xDo not use the unit in circumstances affecting your judgment
such as being drank or drugged.
xSince your device has grounding plug your wall socket should
also be grounding type.
xUse utmost care to prevent your device’s electrical cable
through hot areas.
xUse care that the gas hose will be regulations in law institute
stamped, not be laid through hot areas, and it should be
checked with soap bubble whether any gas leakage exists.
xUse clamp to tighten the gas hose after connecting it to the
head of the hose. Control whether there is any gas leakage
exists by using soap bubble.
xNote that the LPG hoods should have regulations in law
institute stamp and 300 mmSS (30mbar) of outlet pressure.
xNatural gas pressure is 200 mmSS (20mbar). Please
consult the authorized service for conversion to natural gas or
LPG.
xNote: Usage of the gas baking products shall cause heat and
steam formation at the places of existence. Be sure that your

4
kitchen is ventilated well. Keep the natural ventilation outlets
open or install a mechanical ventilation product (hood,
aspirator).
Note: Burners burning of setting can be done between large and
between.
GENERAL SAFETY WARNINGS
xSince this unit was produced for domestic use, it is not
suitable for commercial and industrial use. It is dangerous and
inappropriate to use it for any other purpose (e.g. heating a
room).
xDo not allow laying of the gas hose and electric cord from the
heated part of the unit.
xKeep any flaming, explosive and ignition materials from your
device.
xDo not change the place of your device when working and/ or it
is hot.
xWhen you do not use your hob, close the feeding valve after
making all switches to “OFF” position.
xDo not let your hob in operation without supervision control it
with frequently.
xTake out the plug from the wall socket during handling,
cleaning or maintenance of the unit.
xDo not ever attempt to remove the cable from the wall socket
by handling the cable.
xDo not touch or operate the unit when your hands or feet are
wet.
xFor the hobs supplied with glass: if the glass of your hob will
crack and/ or break remove the device from the wall socket.
xDo not use pans transferring the excessive heat to the glass.
xPlace the pan right in the middle of the burner.
xDo not place any sharp object on the hob.
xKeep the pan on the hob carefully and avoid dropping it.

5
xThe shapes in this guide are schematic and may not be exact
match of your product. The values stated on the marking on
the unit or other printed documents given with the unit are the
values obtained at the laboratory pursuant to the applicable
standards. Such values may be changed as per the usage and
environment conditions of the unit.
xDo not heat the closed cans and glass jars. The pressure
which may occur in such containers may cause explosion.
xSince the edges of the product will be hot do not place
explosive or combustibles near the unit.
xDo not place the empty pans and containers on the operating
hob eyes. The glass surface may be damaged.
xNo plastic and aluminum container is allowed over the unit
since it might be hot.
4. ENVIRONMENTAL PROTECTION
This device is subject to 2002/96/EC WEEE (Waste Electric and
Electronic Equipment) as per the applicable directives of Europe.
Before disposal of the device, you need to prevent negative
results to human and environment. Otherwise it would be
incompliant waste. This symbol indicates that the unit should not
be disposed as domestic waste rather it should be returned to
some electronic wastes collection center. The disposal of the
product should be conducted as per the local environmental
legislation. You may obtain detail information on disposal, reuse
and recycling of the product.
It is suitable with the applicable regulations of WEEE.
This symbol indicates that the unit should not be
disposed as domestic waste rather it should be
returned to some electronic wastes collection
center. The disposal of the product should be
conducted as per the local environmental
legislation. You may obtain detail information on

6
disposal, reuse and recycling of the product.
xKeep the original packaging of the product.
xCarry the product in its original packaging, and abide the
markings thereon.
xIf the original packaging is not available;
9Take care for the impacts which may be applied on the
outer surfaces of the product.
9Place/ hold the product in parallel to the ground during
carrying (as the upper side will be up).
9Carry the pan holders not touching each other.
Packaging
All packaging materials are recyclable. In order
to contribute environmental protection place
the packaging material wastes to the recycling
bins.
Disposal of the old equipments
The equipments being old and useless should not be thrown to a
waste container directly. There may be some parts allowing re-
use. Also there may be some environmentally dangerous
materials requiring to be given to a collection center. Therefore
you should take your unit to a collection center that you may
learn from the manufacturer/ dealer in your city and insure that
the electronic parts will be recycled.
It is important to keep the user’s manual for it will be important in
the event of change of the user of the device.
Before disposal or scraping of the device it is required to prevent
harmful and negative effects on human and environment.
Otherwise it would be incompliant waste.

7
5. BEFORE USING YOUR APPLIANCE FOR THE FIRST TIME
xMake sure that you remove all packaging materials before
using the unit.
xWhen you remove the hob from the package make sure that
hob and / or the cable is full and undamaged, and no impact
was put at the bottom of the device, otherwise consult your
seller.
xAny and all works on the gas equipments and systems should
be conducted by the competent and authorized persons.
xGas hobs cause heat and steam formation at the
environments in which they are used.
xMake sure that your kitchen ventilated well. Keep the natural
ventilation channels open or use ventilation product (hood).
xHave the required maintenance of the gas products by the
competent and authorized persons.
xClean the gas burners regularly.
xRequest the telephone numbers from the local gas suppliers
for emergency cases.
Things to be done when gas smells
xDo not use flame. Do not smoke Do not operate the switch of
any electrical device. Do not use fixed or mobile phone.
xClose all valves on the gas products and gas counters.
xOpen the doors and windows.
xGo out of the house if you smell gas still.
xWarn the neighbors.
xCal the fire service. Use a phone outside the home.
xDo not enter the house until you will be notified that it is safe.

8
6. MAINTENANCE AND INSTALLATION MANUAL
6.1. SAFETY INSTALLATION
The installation should be conducted by an authorized service
dealer as per the installation instructions. Our firm may not be
held liable for any losses and damages to human, animals or
objects due to any inappropriate use of the unit.
PRE-INSTALLATION WARNINGS
ATTENTION: Before the installation check that the gas type and
gas pressure stated under the product fit those of your home.
Call the authorized service dealer for possible gas type changes
in future.
xWhen the unit was taken off its packaging make sure that it is
strong, not bent and has no fault at all. In the event of any
doubt consult the dealer.
xCut off the electric connection of the unit from the main switch
during installation.
xIn order that built in cook-tops will operate smoothly the
measurements of the counter on which it will be mounted and
the materials used for installation should be proper, and the
counter should be resistant against heat.
Read the following instructions to fix the hob on the
counter:
In order to prevent insertion of the foreign materials and liquids
between the hob and the counter attaché the adhesive band on
the counter hole without allowing any overlapping before the
installation.

9
Place the hob on the counter hole to center the installation hole.
Secure the unit on the counter by using the installation sheet and
screws.
Please review the following figures carefully so that the hob will
be installed properly.
6.2. INSTALLING THE APPLIANCE
This equipment should be mounted at the well ventilated places
and as per the regulations in force. The installation personnel
should consider the laws and norms applicable to the release of
burning gases and ventilation.
xYour hob is designed to be installed on the standard counters
which you may find in the market.
xThe materials used on the surface and the link partitions under
the counter should be resistant against minimum 100°C.
xA safe distance should be left between the hob and the
counter walls (Figure 4).
xThe hole to be provided for the hob on the counter should be
as per the figure. (Figure 4)
xThe distance between the hob sole and the partition should be
at least 25 mm. (Figure 5)

10
Figure 1
.
x
The distance between the cook top ad another device (e.g.
kitchen hood) shall not be less than 700 mm (Figure 5).
xIf 60 cm Hobs will be place on a built in oven without any
cooling system, it is recommended to leave 300 cm2 of
ventilation hole in order to insure air circulation. If 75 or 90 cm
cook-top will be placed the oven has to have cooling fan.
xThere must be 200 cm² space at the side wall off the cabinet
of the hob.

11
MIN. 700 mm
Figure 2.
Release of Burnt Gases
xThe air required for burning is taken to the environment of the
hob and the burnt gas are released to the environment.
Proper ventilation should be maintained for safe operation of
the unit. The ventilation openings defined as per the volume
of the environment are provided at the bale (Table 1).
xBurnt gases should be discharged outside by the hood with
flume.
xIf no kitchen hood is used, an electrical ventilator should be
used having guaranteed capacity to discharge 3-5 times of the
kitchen air to be installed at the wall or window of the building
(Figure 6)
25 mm

12
1. Cooktop
2. Aspirator
3. Electrical ventilator
4. Ventilation Opening Figure 3.
VOLUME OF
THE ROOM (m³)
VENTILATION
OPENING
(cm²)
Less than 5 m
³
Minimum 100 cm
²
Between 5m
³
and 10 m³Minimum 50 cm
²
Larger than 10 m³
Not required
Basement or Cellar
Minimum 65 cm
²
Table 1
Installation of the Hob on the Counter
xIn order to prevent insertion of the foreign materials and liquids
between the hob and the counter attaché the gasket on the
counter hole without allowing any overlapping before the
installation. (Figure 7)

13
xPlace the hob on the counter hole to center the installation
hole.
xSecure the unit on the counter by using the installation sheet
and screws. (Figure 7 and 8)
Figure 4.
Installation Clamp
Figure 5.
6.3. ELECTRIC CONNECTION
xElectric connection should be conducted by a competent
and authorized person.
xThe electric cable of your hob should not be laid at hot
regions.
xWhen the power cable is damaged this cable should be
changed with a special cable to be supplied by a special
cable agency or the authorized service dealer.
Counter
Gasket
Installation Clamp

14
xNo reducer, adapter, and switch should be used for
electrical connection since it will cause excessive heat and
fire.
xPlug the electric cable to a grounded wall socket. The
manufacturer hereby declares that it will be released all
liability in the event of any failure in this issue.
xThe supply data of the electric network should be suitable
with the data on the type label of the unit.
6.4. GAS CONNECTION
These instructions are prepared for specialist personnel having
required competence, the installation of the equipment
should be suitable as per the applicable standards.
All gas related works should be conducted when the
electric connection was cut.
The value plate on the hob indicates the gas type intended to be
used for use with the hob. Connection to the main gas course or
gas type shall be realized after controlling the adjustment as per
the gas type. Connection to the main gas source or gas cylinder
shall be conducted after checking the adjustment according to
the proper gas type. If it is set properly look at the following
paragraphs:
Note that the LPG hoods should have standarts stamp and 300
mmSS (30mbar) of outlet pressure.
Natural gas pressure is 200 mmSS (20mbar). Please consult the
authorized service for conversion to natural gas or LPG.
Use only piping, gaskets or stamp as per the applicable national
standards.
In some countries where conic connections are obligatory, conic
connection is provided. In such a case the conic connection part
should be connected to the unit.

15
If the unit will be connected to a flexible hose, the length of the
hose shall not exceed 120 cm.
Before starting works related to gas installation, please cut the
gas supply.
Make the connection so that no pressure will be applied on the
connection records and piping. Make sure that the pipe will not
cause any clogging or contact with the sharp corners.
Note that the gas hose will not be laid through hot areas.
NOTE: Replace the gas hose of your hob at 4 to 5 years
even if it will be undamaged.
NOTE: Check whether any gas leakage after the connection
with soap and water. Do not ever use flame.
Make sure that no additional weight to be applied on the gas
hose.
And apply the following order for installation;
1. In the order; male adaptor cylindrical, gasket, female gas
adaptor, conical-cylindrical or cylindrical cylindrical
components,
2. Tighten connection place with the keys so that the pipes
will be in proper position,
3. Attach C coupling to the main gas source by using hard
copper pipe or flexible steel pipe.
WARNING; Final Check whether any leakage exists at the
pipes with a solution with a soap, and do not ever use flame.
6.5. ADJUSTMENT OF HOB PER GAS TYPES
These instructions are prepared for specialist personnel having

16
required competence, the installation of the equipment should be
suitable as per the applicable standards.
xAll gas related works should be conducted when the electric
connection was cut.
In order to convert the hob, remove the burner plates and flame
circles thereon. Replace the injectors as per the followings, and
change them with the injectors with suitable diameters defined
in the user’s manual. Conduct the works with a plain tip
screwdriver at a position to see valve setting screw by removing
the switches of the hob and rubber seals. In order to set the low
flame level, turn the gas setting screw on the valve to have
minimum gas setting flow. Do this setting after installing the
burner component of the burner, burning the burner and bringing
the switch setting to minimum.
Flow setting screw should be tightened in LPG conversions as it
should be released for conversion from LPG to natural gas.
After realization of the hob, complete the conversion transaction
by connecting the rubber seals and switched in the same order.
These instructions should be used by an authorized service. The
products should be installed as per the regulations in force and in
proper manner. Before conducting any transaction the electrical
connections of the hob should be cut by no means.
The type label on the hob indicates the gas type planned to be
used with the unit.

17
6.6. STARTING THE APPLIANCE
FIRING OF BURNER
If your hob does not have built in lighter or during black out place
the naked flame over the burner and push the switch to bring it to
the desired position with counter-clockwise movement. Gas
adjustment should be between maximum and minimum
levels, it should not be realized between maximum and off
positions. To close the burner turn the switch clockwise till to
reach “off” position.
MODELS EQUIPPED WITH LIGHTER SWITCH (Automatic
ignition)
In order to burn one of the burners, press the switch down and
bring the switch to maximum position. When it burns, flame is
adjusted to the desired intensity with the switch.