LABORIE Urocap III User manual

LABORIE Urocap III Owner’s Manual UC3-UM01-V22.00

LABORIE Urocap III Owner’s Manual UC3-UM01 ii
LABORIE USA
400 Avenue D, Suite 10
Williston, Vermont, USA 05495
Tel: [phone]
Fax: [phone]
LABORIE Headquarters
6415 Northwest Dr., Unit 10
Mississauga, Ontario, Canada L4V 1X1
Tel: [phone]
Fax: [phone]
LABORIE Europe/International
Medical Measurement
Systems B.V.
Colosseum 25
7521 PV Enschede
The Netherlands
Tel.: [phone]
Fax: [phone]
www.laborie.com
Urocap, Triton, AquariusTT, DoradoKT, Delphis, and i-LIST are trademarks of Laborie Medical Technologies
Canada ULC. Windows is a trademark of Microsoft Corp. Bluetooth is a registered trademark of Bluetooth SIG,
Inc. Other names may be trademarks of their respective owners.
All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior
written permission of LABORIE.
© Copyright 2005-2020 LABORIE
Document Number: UC3-UM01
Version Number: 22.00
Release Date: April 17, 2020
Issued By: R.A.
Laborie Medical Technologies Canada ULC
6415 Northwest Drive, Unit 10
Mississauga ON L4V 1X1
CANADA

LABORIE Urocap III Owner’s Manual UC3-UM01 iii
TABLE OF CONTENTS
1. INTRODUCTION ................................................................................................................................... 1
1.1. PRODUCT OVERVIEW AND FEATURES ....................................................................................................................... 2
1.2. UROCAP III MODEL..................................................................................................................................................... 2
Urocap III Wireless, BT.......................................................................................................................................................................................... 2
1.3. CAUTIONS AND WARNINGS....................................................................................................................................... 3
1.5. INTENDED USE ........................................................................................................................................................... 6
1.6. TARGET POPULATION ................................................................................................................................................ 6
1.7. CONTRAINDICATIONS ................................................................................................................................................ 6
2. UROCAP III EQUIPMENT AND ACCESSORIES ......................................................................................... 7
2.1. UNPACKING THE UROCAP III EQUIPMENT................................................................................................................. 7
Urocap III Wireless................................................................................................................................................................................................ 7
2.2. SETTING UP THE UROCAP III EQUIPMENT ................................................................................................................. 9
2.3. EQUIPMENT STATUS AND INDICATOR LIGHTS .......................................................................................................... 9
BI-COLOUR INDICATOR LED .................................................................................................................................................................................. 9
The Indicator LED provides important information on the status of the Urocap™ III........................................................................................... 9
2.4. SOFTWARE SET UP ................................................................................................................................................... 10
2.5. LOGON SCREEN ........................................................................................................................................................ 11
2.6. UDS CLIENT WINDOW.............................................................................................................................................. 11
2.7. FILE MENU................................................................................................................................................................ 12
Open ................................................................................................................................................................................................................... 12
Save As................................................................................................................................................................................................................ 14
Print Study .......................................................................................................................................................................................................... 14
Batch Print (Optional) ......................................................................................................................................................................................... 16
Print Setup .......................................................................................................................................................................................................... 17
About UDS Client ................................................................................................................................................................................................ 17
Import ICS ........................................................................................................................................................................................................... 18
Import ASC .......................................................................................................................................................................................................... 18
Exit ...................................................................................................................................................................................................................... 18
2.8. INFO MENU .............................................................................................................................................................. 18
Patient Info ......................................................................................................................................................................................................... 18
X-Y Plot ........................................................................................................................................................................................................ 19
Event Summary................................................................................................................................................................................................... 21
Voiding Summary................................................................................................................................................................................................ 23
Uroflow options.................................................................................................................................................................................................. 24
Artifact Recognition ............................................................................................................................................................................................ 26
Pediatric Nomogram........................................................................................................................................................................................... 26
UPP Summary / UPP ........................................................................................................................................................................................... 27
ARM 2 / ARM 4&8............................................................................................................................................................................................... 27
2.9. OPTIONS MENU ....................................................................................................................................................... 27
Test Restart......................................................................................................................................................................................................... 27
Test Playback ...................................................................................................................................................................................................... 28
Uroflow Auto Start.............................................................................................................................................................................................. 28
Cursor Value Indicator ........................................................................................................................................................................................ 28
Digital Value Indicator ........................................................................................................................................................................................ 29
Control Panel Settings......................................................................................................................................................................................... 29
Multiple Control Panel Sets and Hot Key Configuration ..................................................................................................................................... 31
Customize Colors and Fonts................................................................................................................................................................................ 33
Control Panel Commands ................................................................................................................................................................................... 34
File Saving Directory ........................................................................................................................................................................................... 34
Auto Mark Peaks................................................................................................................................................................................................. 34
Graph Clipping .................................................................................................................................................................................................... 35
Smart Tracing...................................................................................................................................................................................................... 35
VBN Settings ....................................................................................................................................................................................................... 35
iLIST..................................................................................................................................................................................................................... 36
2.10. CONNECTION MANAGER (OPTIONAL) ................................................................................................................. 36

LABORIE Urocap III Owner’s Manual UC3-UM01 iv
2.11. SERVERX MENU.................................................................................................................................................... 39
Daughter Download............................................................................................................................................................................................ 39
Pump/Transducer Calibration............................................................................................................................................................................. 39
Reset Connection................................................................................................................................................................................................ 40
Show ServerX Window........................................................................................................................................................................................ 40
Choose Bluetooth UDS-94 .................................................................................................................................................................................. 40
3. ADDITIONAL SOFTWARE FEATURES ................................................................................................... 41
3.1. TITLE, NUMERIC, UNIT, AND SCALE FONT................................................................................................................ 41
3.2. CHANGE CHANNEL ORDER (OPTIONAL)................................................................................................................... 41
3.3. CHANGE CHANNEL TITLES AND UNITS (OPTIONAL)................................................................................................. 42
3.4. CHANGE CHANNEL SCALES (OPTIONAL) .................................................................................................................. 43
4. RUNNING A UROFLOW TEST .............................................................................................................. 44
4.1. USING THE UROCAP™ III WIRELESS MODEL ............................................................................................................ 44
PERFORMING A UROFLOW TEST ......................................................................................................................................... 44
5. TRANSDUCER CALIBRATION ............................................................................................................... 45
5.1. CALIBRATING THE UROCAP III WIRELESS MODEL.................................................................................................... 45
6. CLEANING AND PREVENTIVE MAINTENANCE ..................................................................................... 48
6.1. CLEANING................................................................................................................................................................. 48
6.2. PREVENTIVE MAINTENANCE.................................................................................................................................... 48
Check the Flow and Volume of the Uroflowmeter ............................................................................................................................................. 48
VIRUS PROTECTION ............................................................................................................................................................................................ 49
6.3. TREATING AND DISPOSING OF PRODUCTS AFTER USE............................................................................................ 49
7. TROUBLESHOOTING .......................................................................................................................... 50
TROUBLESHOOTING: ACTIONS CHART................................................................................................................................................................ 50
8. APPENDICES ...................................................................................................................................... 53
APPENDIX A. SPECIFICATIONS ....................................................................................................................... 53
SYSTEM SPECIFICATIONS: ................................................................................................................................................................................... 53
EQUIPMENT/ACCESSORY PART NUMBERS ......................................................................................................................................................... 54
CLASSIFICATIONS ................................................................................................................................................................................................ 54
APPLICABLE DIRECTIVES AND STANDARDS......................................................................................................................................................... 54
APPENDIX B. SYMBOLS AND LABELING.......................................................................................................... 55
APPENDIX C. ELECTROMAGNETIC COMPATABILITY (EMC) ............................................................................. 56
TABLES OF GUIDANCE AND DECLARATION REGARDING ELECTROMAGNETIC IMMUNITY................................................. 57
IEC 60601-1-2: 2014 - Table 1 Requirements .................................................................................................................................... 58
IEC 60601-1-2:2014 – Table 2 Requirements .................................................................................................................................... 58
IEC 60601-1-2: 2014 – Table 4 Requirements ................................................................................................................................... 60
IEC 60601-1-2: 2014 – Table 6 Requirements ................................................................................................................................... 61
APPENDIX D. END-USER SOFTWARE LICENSE AGREEMENT............................................................................. 62
APPENDIX E. VOIDING SUMMARY ANALYSIS................................................................................................. 63
APPENDIX F. NOMOGRAM TABLES FOR UROFLOWMETRY............................................................................. 64
APPENDIX G. ACCESSORY DESCRIPTIONS ....................................................................................................... 66

LABORIE Urocap III Owner’s Manual UC3-UM01 v
ENDNOTES ................................................................................................................................................... 67

LABORIE Urocap III Owner’s Manual UC3-UM01 1
1. INTRODUCTION
The Urocap™ III is one of the world’s most compact Uroflowmetry analyzers with built-in comparative studies.
These studies, along with other unique features, will deliver highly accurate Uroflowmetry recordings that are
easy to produce and interpret. An added feature to the Urocap III is the built-in Bluetooth® technology —
providing you with the ease and flexibility of wireless connection to perform all your Uroflowmetry
procedures.
Uroflowmetry (Uroflow) is a standard Urodynamic test, whereby the urine flow rate and volume are
measured. Uroflowmetry is used to verify or disprove patient symptoms via scientific methodology. It is a
prerequisite for you, as a user of this equipment, to understand the basic measuring principles and techniques
of Uroflowmetry analysis.
The purpose of this manual is to familiarize you with the installation, use, and operation of the Urocap III
Uroflowmetry analyzer.
For further information or technical service, please contact your local sales representative or contact LABORIE.

LABORIE Urocap III Owner’s Manual UC3-UM01 2
1.1.PRODUCT OVERVIEW AND FEATURES
The Urocap III uses Uroflowmetry as a form of Urodynamic testing. The urinary flow rate and volume are
measured and the results, in general, are used to verify or disprove patient symptoms via scientific
methodology.
Data acquisition occurs as the transducer collects and processes data. It prints the data in graphical form
during the procedure, and is followed by a calculated Voiding Summary.
Some of the features include:
•Hardcopy printout of Uroflow report including:
•Patient information section
•Uroflow graph including Flow and Volume channels
•Voiding Summary
•Reprint option
•Customized Clinic name (optional)
•On-site calibration
•Software interface with real-time graph scrolling
•Ability to connect wirelessly from one Urocap III to another or one Urocap III toanother
Laborie UDS system
1.2.UROCAP III MODEL
Urocap III Wireless, BT
The Urocap™ III connects wirelessly to the PC; which, runs the UDS software on the Microsoft Windows XP®
Professional,Windows 7® Professional, and Windows 10® operating systems. The UDS software facilitates all
commands to operate the product.
For warranty information and terms and conditions visit www.laborie.com.

LABORIE Urocap III Owner’s Manual UC3-UM01 3
1.3.CAUTIONS AND WARNINGS
PLEASE READ CAREFULLY BEFORE USE!
CAUTIONS
1. UNITED STATES FEDERAL LAW RESTRICTS THIS DEVICE TO SALE OR USE BY OR ON
THE ORDER OF A LICENSED PHYSICIAN.
2. DO NOT USE an AC adapter other than that which is specified. It may negatively affect
the protection against electrical shock.
WARNINGS
1. Only technicians and physicians trained in Urodynamics should operate this device. The
operator must read the Owner’s manual entirely and refer to any additional training
materials before using the device. Optional In-Service is available from LABORIE.
2. Use the device indoors in a well-lit room only with the following Operating conditions
•Temperature: 15°C to 35°C
•Humidity: 20% to 80%
•Pressure: 700hPa to 1014hPa
And the following Transport and Storage conditions
•Temperature: -29°C to 60°C
•Humidity: uncontrolled to 85% relative humidity
3. DO NOT USE in the presence of a flammable anesthetic mixture with air or oxygen ornitrous oxide.
4. DO NOT USE the unit in the same room as an operating magnetic resonance imaging
device (MRI). The strong magnetic field produced during MRI may cause disruption of
the system.
5. All transducers should be calibrated prior to use. Calibration should be checked at least
every six (6) months or whenever there is a suspicion that the calibration is incorrect.
ONLY calibrate the transducer if necessary.
6. Use with LABORIE equipment and accessories ONLY.
7. ONLY Laborie trained technicians may service the unit. DO NOT ATTEMPT TO OPEN OR
REPAIR the system by yourself or by an unauthorized party.
8. LABORIE equipment and accessories are licensed by Governments and approved by
Safety Agencies to work with EACH OTHER ONLY.
9. LABORIE equipment and accessories are warranted to work with EACH OTHER ONLY.
10. Re-use, reprocessing or resterilization of disposables could lead to device failure and create
a risk of cross-infection and/or cross transmission of infectious disease(s) from one patient
to another. Result of sterilization failure could lead to cross infection and/or cross-
transmission of infectious disease from one patient to another.
11. DO NOT STEP on the unit. DO NOT LEAN anywhere on the unit. The unit is not designed to
support the weight of a person.
12. DO NOT PLACE ANY OBJECTS on top of the transducer when not in use. It may damage the
unit.
13. Use the device indoors in a well-lit room only.

LABORIE Urocap III Owner’s Manual UC3-UM01 4
14. Use Input and Output Cables and Cords provided by LABORIE ONLY.
15. Exposure to electrostatic discharge, ESD, may cause the system to RESET.
16. Do not plug in or unplug any transducers when a procedure is running. Always stop the
procedure before plugging in or unplugging transducers.
17. Customers providing their own computer, monitor, or printer for use with the Laborie
system may require the use of a Line Isolation Transformer (LIT) to maintain system
compliance. In all cases it is advised to check with your local regulations before
proceeding.
18. LABORIE is not responsible for loss of patient files or test data. We recommend that
you back up patient data on a regular basis.
19. Any additional equipment connected to medical electrical equipment must comply with the
respective IEC or ISO standards (e.g. IEC 60950 for data processing equipment). All
configurations must comply with the requirements for medical electrical systems. Avoid
altering or adding to UROCAP III™ medical electrical system. Any alteration to UROCAP III™
system by an unauthorized party transfers responsibility for meeting ME system
requirements from LABORIE to the altering party. Anyone connecting supplementary
equipment to medical electrical equipment configures a medical system and is therefore
responsible for ensuring that the system complies with the requirements for medical
electrical systems, encompassed in the IEC 60601 series.
20. The use of cellular phones, smartphones, mobile internet devices, and other portable
wireless devices within close proximity of the system is not recommended and may cause
artifacts to appear on the channels.
21. The Urocap III is packaged for protection during shipment and transport. Verify that all
ordered equipment and accessories have been received. Contact LABORIE should there
be any discrepancies between ordered and received equipment.
22. The device complies with EN 60601-1 Safety (Class I with type B appliedparts) and EN 60601-
1-2 EMC Standards.
23. The Uroflowmeter needs to be positioned so that the beaker does not touch the flow funnel
during the Uroflowmetry procedure.
24. Ensure the beaker is correctly placed on the Urocap base so that there are no abnormalities
displayed in the Uroflowmeter signal. Ensure that the patient remains calm and still during
the entire procedure.
25. The device complies with verification testing and EN 60601-1-6 usability testing to ensure
that the occurrence of incorrect flow or misinterpretation of data is significantly low during
normal mode function.
26. Device complies with verification testing to ensure misinterpretation ofresults / incorrect flow
readings during normal mode is significantly reduced.
27. The connection manager feature in the software allows for reconnection of system
components and access to transducer calibration if necessary.
28. To avoid patient injury, AC-DC power supplies are spaced so that they have short circuit
protection and can withstand the DC outputs being short circuited.
29. To reduce the risk of power failure and patient injury, all critical components are assessed
to IEC/EN 60601-1 Safety standard.
30. To avoid the risk of device connection interruption, reduce the distance between the
device and the computer. The maximum distance between the processor and the
computer can be up to 10 meters (33 feet). Also, Remove any physical barriers like walls,
posts, doors, or people.

LABORIE Urocap III Owner’s Manual UC3-UM01 5
31. The device does not emit any EMI radiation that can affect any other CE-marked
devices/systems in the immediate area.
32. To reduce the risk regarding improper labelling of connections (for the transducer, input
power, and controls) the power connections are separate from other connection types.
33. Device uses the general warning signs/symbols from EN ISO 15223-1 and ISO 7010.
Descriptions of all symbols that appear on the device and the device label can be found
at the back of thismanual.
34. Device is classified as IPX1 Equipment (degree of protection against ingress of water).
35. Do not immerse the UDS equipment or any components in water or any other liquids.
36. Laborie will not be responsible for any damages resulting from the use of incompatible
devices.
37. Prior to testing, a urinalysis and urine culture should be considered to rule out the
presence of infection.
38. To avoid risk of electric shock, this equipment must only be connected to a supply
mains with protective earth.
39. No modification of this equipment allowed.
40. Connecting electrical equipment to a multiple socket outlet effectively leads to creating a
medical electrical system and can result in a reduced level of safety.
41. Do not position the ME EQUIPMENT so that it is difficult to operate the disconnection of
the device.” The Uroflow system must be positioned in such a way so as to provide
unobstructed access to the power cord connector in the event of a required emergency
stop.
42. Always position the UROCAP™ III to facilitate ease of access to all electrical connections,
plugs and controls. Ensure placement of all power cables does not create an obstruction
or safety risk. Device operator must be able to disconnect device quickly and safely in the
case of an emergency.
43. Local laws take priority over the above-mentioned requirements and warnings. If in doubt,
consult your local Laborie representative or the technical service department.
44. Do not place the printer in the patient environment unless it is powered via the Laborie
provided Line Isolation Transformer (Separating transformer).
45. Only connect items that have been approved by Laborie to the system. Any additional
connections become the responsibility of the operator and shall tested to meet the IEC
60601-1, ME SYSTEMS requirements.
46. There is the risk of electrical shock if the operator plugs in Non-ME Equipment (i.e. printer
or laptop) directly into the MAINS supply that is intended to be powered by a Line Isolation
Transformer (Separating transformer)
47. Do not touch the printer/laptop and the patient simultaneously.
48. To avoid the risk of electric shock, only connect this equipment to supply mains with
protective earth.

LABORIE Urocap III Owner’s Manual UC3-UM01 6
1.5.INTENDED USE
The Laborie Urocap III Uroflowmetry analyzer is intended to quantify the flow characteristics of the lower
urinary tract. Using the available transducer, the system can perform standard Uroflowmetry studies.
Uroflowmetry is a standard Urodynamic test that is often used as a screening test before moving on to more
advanced Urodynamic studies such as Pressure or Micturition.
The Urocap III is intended for use in Uroflowmetry studies that measure both flow rate and voided volume;
and is intended for use by a qualified practitioner only.
1.6.TARGET POPULATION
The major application of Urodynamics (including Uroflowmetry) is the diagnosis of uncontrolled loss of urine
(incontinence) or abnormal urinary retention.
1.7.CONTRAINDICATIONS
The Urocap III Uroflowmetry analyzer is contraindicated in any patient who is not a candidate for
Uroflowmetry testing.

LABORIE Urocap III Owner’s Manual UC3-UM01 7
2. UROCAP III EQUIPMENT AND ACCESSORIES
2.1.UNPACKING THE UROCAP III EQUIPMENT
The Urocap III is packaged for protection during shipment and transport. Verify that all ordered equipment
and accessories have been received. Contact LABORIE should there be any discrepancies between ordered and
received equipment.
Inspect the equipment for any visible signs of damage or mishandling, and notify the carrier immediately if
damage has been found.
NOTE: Carrying cases and cartons should be saved to provide a convenient and safe way to return the
equipment should service be required.
STANDARD EQUIPMENT
See page 54 for equipment and accessory part numbers. Part numbers for optional software features and for
the Urocap III model can also be found in that location.
Urocap III Wireless
1 Urocap III wireless transducer
5 Beakers
1 Commode Chair
1 Uroflow Funnel

1 Bluetooth card/USB adaptor
Instruction Manuals
1 Power supply
1 Medical grade power cord
1 Urocap III CD

LABORIE Urocap III Owner’s Manual UC3-UM01 8
RETRACTABLE ANTENNA
The bottom of the wireless model of the Urocap III contains an antenna that can be extended to provide better
Bluetooth signal reception.
OPTIONAL ACCESSORIES
Depending on the setup of your Urocap III system, some of the items listed below may or may not be available
as an optional accessory.
Flow stand
Uroflow Funnel
Folding Commode chair
Funnel for folding commode chair
Desktop printer with wireless support
Bluetooth® Dongle

LABORIE Urocap III Owner’s Manual UC3-UM01 9
2.2.SETTING UP THE UROCAP III EQUIPMENT
UROCAP III WITH WIRELESS MODEL SETUP
1. Connect the power supply to the Urocap III transducer.
2. Connect the power cord to the power supply, and plug the power cord into an electrical outlet.
NOTE: All cables must be connected before turning on the Urocap III unit.
IMPORTANT! The Urocap-III power supply must be in a dry area at least one (1) metre away from the base of
the commode chair.
GENERAL ROOM SETUP
When setting up your Uroflow study room, it is recommended that the printer and the power supply be kept
away from the voiding area. The printer should be placed on a small table or flat surface away from the
voiding area to keep it clean and to prevent any damage due to dirt and fluid.
With the wireless model, the Bluetooth technology built into the Urocap III unit provides the patient with a
higher degree of privacy during voiding. The transducer, beaker, commode chair, and funnel can be set up in
one room while the PC can be in another room collecting the test data.
2.3.EQUIPMENT STATUS AND INDICATOR LIGHTS
BI-COLOUR INDICATOR LED
The Indicator LED provides important information on the status of the Urocap™ III.
Illuminations:
•Solid Green:Indicates a successful Bluetooth connection to laptop PC, Urocap™ III is ready to use.
•Solid Red: Indicates that Bluetooth connection was NOT successful. Mandatory action is required by
operator to connect Urocap™ III to the PC before starting the study. No patient data can be saved
without a successful connection between the Urocap III and the PC.

LABORIE Urocap III Owner’s Manual UC3-UM01 10
2.4.SOFTWARE SET UP
The Urocap™ III wireless software is installed prior to shipping. Only install the software if it has been
accidentally uninstalled or if you are upgrading to a more current version.
Follow the instructions in the Software Installation Guide in the Laborie Software CD for your UDS system.
UROCAP III PC SOFTWARE
The software is designed and is thoroughly tested to run on the Microsoft Windows XP® Professional,
Windows 7® Professional, and Windows 10® operating systems.
NOTE: Some of the software features described may be optional. Please check with your Laborie sales representative
for details.
Microsoft Windows
Knowing how to use the basic Microsoft Windows features is the first step to the test preparation. Each area
and symbol on the screen is significant to the operation of the software.
Windows Start Menu/Task Bar
The Windows Start Menu is located at the Windows task bar. The Start Menu can be used to open programs,
access shortcuts, or shut down Windows. For more information, please refer to your Microsoft Windows
manual.

LABORIE Urocap III Owner’s Manual UC3-UM01 11
SOFTWARE OVERVIEW
2.5.LOGON SCREEN
Once the UDS120 software starts, you may be asked to enter a user name and password. This logon feature, in
accordance to the Health Insurance Portability and Accountability Act (HIPAA) 1996, provides an extra layer of
security for testing and when accessing patient test files.
Depending on the software configuration used, one of two screens will be visible at startup.
OR
The user name and password used for logging on to the computer must be used in this logon screen too. If a
password is not available ask your system administrator to provide one for you.
A log file is created whenever someone starts the software and opens a file.
Note that the software will shut down if an incorrect user name or password is repeatedly entered more than
three times.
2.6.UDS CLIENT WINDOW
The UDS Client is the main window of the UDS Software, which provides the screens necessary for you to
perform tests. The UDS system must connect to the laptop PC in order to run tests.
To open the UDS Client Window:
1. Double-click the UDS120 icon on the Windows desktop
-OR-
Click Start > All Programs > Laborie > UDS120.
Result: The UDS Client opens with the UROCAP III Welcome Screen.

LABORIE Urocap III Owner’s Manual UC3-UM01 12
2.7.FILE MENU
The File menu is the first menu located on the menu bar.
Open
The Open feature on the File menu opens patient tests that have already been created.
Before opening a saved data file, be sure that any currently running patient tests are saved. Once the file is
saved, opening a saved file automatically closes the old one.
To open a saved file:
1. Click File from the menu bar.
2. Select Open.
Result: The Open Test File window opens.

LABORIE Urocap III Owner’s Manual UC3-UM01 13
3. Select the file to be opened.
4. Click Open.
Result: The test file opens.
Data Files can be conveniently sorted according to Filename, Procedure Date, File Date, Patient and
Comments fields.
To sort the Data File, click the Column heading of the field to be sorted. To re-sort in descending
order, click the Column heading again.
NOTE: Numbers always appear before letters when sorted in ascending order.
Re-Index Button: The Re-Index feature updates the information stored in the Data Files within the data
directory for quick view of patient information such as patient name and comments. If a problem such as a
corrupt file exists within the list of displayed files, update the list by clicking the Re-Index button.
Save ListView Button: The Save ListView button allows you to save a copy of the file list in notepad. For
example, the Open Test File window on the previous page will look like this when saved in Notepad:
Set Directory Button: The Set Directory button allows you to see the location of the directory where all test
data is saved. To change the directory, refer to the
File Saving Director section on page 34.

LABORIE Urocap III Owner’s Manual UC3-UM01 14
Save As
The Save As feature is used to:
Save a test for the first time.
Resave a test using a different filename.
Setup Patient File Security features.
When choosing a new file name, keep the following pointsin mind:
The filename should not have been previously used.
The filename should not contain punctuation marks.
It is important that a system for filing be established so that test data may be recognizedand
retrieved easily.
NOTE: All patient files are automatically stored in the c:\data directory. To change the directory, refer to the Directories section on
page 34.
To assign a name to a file:
1. Click File from the menu bar.
2. Select Save As.
Result: The Save Test File dialog box appears.
3. Click inside the text box.
Result: The mouse cursor changes to an edit cursor.
4. Enter the desired filename using the keyboard.
Result: The file extension .DTA stands for data and is automatically added to the filename.
5. If required, make sure that the Encrypt Patient Information box is selected.
6. Select the type of file you would like to save from the Save As Type list.
7. Click Save.
Result: The file is saved with the new name.
Print Study
The Font button can change the look of some of the items on the printed report. Once the Font button is
clicked, double-click the name of the feature that will have a font change. Select the size and style and click OK
to confirm the changes.
To print the study:
1. Click File > Print Study.
Result: The Print Options dialog box appears.
2. Refer to the following diagram and its accompanying legend to select printing options.

LABORIE Urocap III Owner’s Manual UC3-UM01 15
Description Print Output
Uroflow Report
1 page voiding study report
UDS Report
Multi page complex study report
Graph Pages
Graph pages of UDS report
Report Pages
Report pages
Standard Report
2 or more pages report style
Voiding Summary
Uroflow Summary
Event Summary
Event Summary
Print Border
This feature will frame the graph with a simple line border.
Number of Copies
The default number of copies to print is one.
Click on the combo box arrows to change the number of copies to be
printed.
Fine
Small grid squares on graph
Coarse
Large grid squares on graph
None
No grid squares
Default
Test from beginning to end.
1-Page Graph
Graph page is condensed into one page.
Standard
Standard Graph pages printed out with no compression or expansion
applied
Min/page
Selectable number of minutes per graph page. Use the scroll bar to
adjust the view.
Segments
Print the Uroflow graph segment