Lancaster Cafe Chair User manual

Cafe Chair
ASSEMBLY INSTRUCTIONS
REQUIRED TOOLS: • Screwdriver
CONTENTS:
A
Frame 1/PC
B
Backrest 1/PC
C
Seat 1/PC
HARDWARE:
D
Backrest Screws 6/PC
E
Seat Screws 6/PC
NOTES:
1. Inspect all pieces for damage before assembly. Do not assemble if any pieces are broken or damaged. Ensure you have all
required pieces before assembly.
2. Power drill is optional for assembly.
STEP 1
Align backrest (B) on top part of frame (A) between
the two poles. Backrest should fit snug between the
two frame poles.
B
A
STEP 2
Attach backrest (B) to frame (A) with six backrest
screws (D) using a screw driver or drill.
B
D
A
CAFE CHAIR  ASSEMBLY INSTRUCTIONS WWW.LANCASTERTABLEANDSEATING.COM

Cafe Chair
ASSEMBLY INSTRUCTIONS
STEP 3
Place frame (A) on its back. Center seat (C) on the
frame (A) with six screw holes. Push the seat against
the frame, ensuring the front of the seat is parallel
to the front of the frame.
C
A
STEP 4
Attach seat (C) to frame (A) with six seat screws (E)
using a screwdriver or power drill.
E
C
A
STEP 5
Ensure all screws are tightened fully.
Stand chair upright for usage.
CAFE CHAIR  ASSEMBLY INSTRUCTIONS WWW.LANCASTERTABLEANDSEATING.COM