Lancaster Crossback Chair User manual

Crossback Chair
ASSEMBLY INSTRUCTIONS
PARTS LIST:
Frame 1/PC
A2Vinyl Cushion 1/PC
B
Screws 4/PC
C
REQUIRED TOOLS: Screwdriver
NOTES:
1. Inspect all pieces for damage before assembly.
Do not assemble if any pieces are broken or damaged.
Ensure you have all required pieces before assembly.
2. Power drill is optional for assembly.
3. There are two options for assembly, please reference both
steps for your preference.
STEP 1
Option 1: Place chair frame (A) on its back. Center
cushion (B) on the frame with four screw holes, push
the cushion against frame, ensure front of cushion is
parallel to the front of the frame.
A
BOR
Option 2: Place seat (B) upside down on a flat surface,
preferably a table. Align chair frame (A) on top of cushion
(B). Center cushion with four screw holes on frame, push
cushion against the back of the frame and ensure front of
cushion is parallel to the front of the frame.
A
B
CROSSBACK CHAIR • ASSEMBLY INSTRUCTIONS WWW.LANCASTERTABLEANDSEATING.COM

Crossback Chair
ASSEMBLY INSTRUCTIONS
STEP 2
Attach cushion (B) to frame (A) with four
screws (C) using a screwdriver or powerdrill.
A
B
C
STEP 3
Ensure all screws are tightened fully.
Stand chair upright for usage.
CROSSBACK CHAIR • ASSEMBLY INSTRUCTIONS WWW.LANCASTERTABLEANDSEATING.COM