Lancaster Mid-Century Table Base User manual

A
B
B
30” x 30” Standard Height Tables
Mid-Century Table Base
ASSEMBLY INSTRUCTIONS
WWW.LANCASTERTABLEANDSEATING.COM
PARTS LIST:
2
MID-CENTURY TABLE BASE • ASSEMBLY INSTRUCTIONS WWW.LANCASTERTABLEANDSEATING.COM
AA
E
B
B
C
C
STEP 2
1. Inspect all pieces for damage before assembly. Do not assemble if any pieces are
broken or damaged. Ensure you have all required pieces before assembly.
2. Check tabletop screw length to verify compatibility with chosen tabletop.
3. Phillips head screwdriver (not included) needed to attach tabletop (power drill is
optional).
Bolts 16/PCS Tabletop Screws 4/PCS Allen Key 1/PC
NOTES:
CD E
Cross Bars 2/PCS
B
Side Legs 2/PCS
A
Lay 1 side leg (A) on a smooth, clean surface.
Take 1 cross bar (B) and align with holes
on the top bar of side legs. Using the allen
wrench (E), secure with 4 bolts (C). Do not
fully tighten until step 3. Repeat for the
second cross bar, do not fully tighten.
Stand side legs up and align side legs (A) with
the other end of the cross bars (B). Using the
allen wrench (E), secure both cross bars to both
side legs with 4 bolts (C) per connection as
shown below. Do not fully tighten until step 3.
STEP 2
STEP 1

WWW.LANCASTERTABLEANDSEATING.COM
30” x 30” Standard Height Tables
Mid-Century Table Base
ASSEMBLY INSTRUCTIONS
MID-CENTURY TABLE BASE • ASSEMBLY INSTRUCTIONS WWW.LANCASTERTABLEANDSEATING.COM
D
30” x 30” Standard Height Tables
Mid-Century Table Base
ASSEMBLY INSTRUCTIONS
Make sure base is level on flat ground, then tighten all bolts.
Be sure to verify screw length with chosen tabletop before installing!
To attach to tabletop, turn tabletop upside down on a smooth, clean
surface. Turn table base upside down on top of tabletop. Center base,
and secure with 4 tabletop screws (D).
C L E A N I N G & MAINTENANCE
• Periodically tighten bolts as needed.
• Wipe down table base with a damp cloth.
• Follow specific instructions for tabletop cleaning and maintenance.
STEP 3
STEP 4