Lancaster Ladderback Swivel Barstool User manual

Ladderback Swivel Barstool
ASSEMBLY INSTRUCTIONS
PARTS LIST
Seat 1/PC
A
Seat Frame 1/PC
B
Seat Screws 6/PC
C
Base with Swivel Plate 1/PC
D
2Bolts 4/PC
E
2Nuts 4/PC
F
2Wrench 1/PC
G
2Allen Key 1/PC
H
NOTES
1. Before starting, make sure you have all the required pieces.
2. A screwdriver is required for assembly (not included).
A drill is optional for easier assembly.
3. Use caution when assembling the base as the swivel plate
has moving parts.
STEP 1
To Start, place the seat (A) upside down on a table
and set the seat frame (B) upside on top of the cushion.
Be sure to center the frame on top of the cushion.
The front edge of the cushion should be parallel to the
front edge of the seat frame.
STEP 2
Using a screwdriver or drill, attach the 6 seat screws (C)
and secure the cushion to the frame through the screw
holes on the seat frame.
LADDERBACK SWIVEL BARSTOOL • ASSEMBLY INSTRUCTIONS WWW.LANCASTERTABLEANDSEATING.COM

Ladderback Swivel Barstool
ASSEMBLY INSTRUCTIONS
STEP 3
Next, rotate the swivel plate on top of the
base (D) so that all four holes are accessible.
STEP 4
Flip the base upside down and position it on top of the
seat frame and seat. Align the holes in the swivel plate
with the frame. Next, insert a bolt (E) through a hole
in the swivel plate and secure with a nut (F). Use the
wrench (G) to hold the nut securely while you tighten
the bolt with the allen key (H). Repeat for all four holes
in the swivel plate.
STEP 5
Ensure all bolts and screws are tightened securely.
Carefully flip the stool and turn it right side up.
LADDERBACK SWIVEL BARSTOOL • ASSEMBLY INSTRUCTIONS WWW.LANCASTERTABLEANDSEATING.COM