Laufen CLEANET RIVA User manual

LAUFEN CLEANET RIVA
QUICK START GUIDE

2
Intended use
The Laufen shower toilet is designed to wash the rear area and also the female intimate area
with the lady shower. Any other kind of use is not permitted. Glowing cigarettes or other
burning objects must not be thrown into the WC bowl. Laufen shall not accept liability for
damage that occurs as a result of connecting the appliance incorrectly, misuse or inappro-
priate use.
Persons with physical, sensory or mental disabilities as well as persons who are
completely unfamiliar with the appliance (especially children) may only use the shower
toilet under the supervision or instruction of a responsible person.
Warning notices/precautions (your safety)
Never operate a faulty appliance or an appliance with a damaged supply pipe. Only connect
the appliance to the voltages specified in the operating manual. For further information,
see section 13 in the operating manual (www.laufen-cleanet.com), Laufen Cleanet Riva
technical data.
Check all functions regularly to ensure they work normally. Should you have any suspicion
that the appliance is faulty, disconnect it immediately from the power supply and contact
Laufen customer services.
Do not attempt to open or repair the appliance yourself. Do not install any additional
components or make any modifications. The appliance contains live components.
Opening the appliance can be extremely dangerous!
Unprofessionally performed repairs can cause dangerous accidents, malfunctions or
damage to the appliance and installation. Repairs must therefore always be performed by
trained and authorised personnel using original spare parts and accessories.
Only original materials for electrical and water connections as well as original spare parts
may be used.
SAFETY AND WARNING NOTICES

3
In the event of an appliance malfunction or repair order, follow the instructions in section 11,
Troubleshooting. If necessary, contact Laufen customer services. Every person feels
temperatures differently. You should therefore check the water temperature setting before
using the shower toilet.
As a user or owner, you may only maintain or operate the appliance as described in
the instructions which can be found online at www.laufen-cleanet.com
Always use drinking water to operate your Laufen shower toilet. Do not use rainwater,
grey water or demineralised water.
Always use original Laufen products or products recommended by Laufen for cleaning,
care and decalcification tasks. We do not accept liability for the use of other products.
Thermal cleaning is performed using hot water: Caution,risk of scalding!
Do not sit on the shower toilet during thermal cleaning.
Visit www.laufen-cleanet.com to view the Declaration of Conformity

4
Spray
settings
Reduce
spray intensity
Reduce
spray time
Stop
User profile 3
Back
Reset
Basic profile
Rear shower
Oscillation
Confirm
Thermal
cleaning
General settings
Odour
extraction
User profile 1
Lady shower
Pulsation
Cancel
Decalcification
Replacing the
odour filter
Information
User profile 2
Power shower
Increase
spray intensity
Increase
spray time
Continue
Factory
settings
Help
Menu
Water hardness
Disassembling
ceramic piece
Reduce spray
temperature
Reduce
Save
Retract spray
arm
Service
information
User profile 4
Extend spray
arm
LED display
Increase spray
temperature
Increase
Language
Demo
OVERVIEW

5
Carbon filter opening
Descaling agent
opening
Controller with
rotary button
Wall holder
Remote control
with touch screen
Start button
Reset button/
Holiday program
LED display
Main switch

6
The following functions can be
activated using the controller:
Controller with
rotary button
Remote control Description
User profile selection You can select 4 stored user profiles by turning the controller.
One indent forward selects user profile 1. The second indent
selects user profile 2, etc. One indent back reduces the
user profile by one in each case. If you do not select a user
profile, the basic profile is activated automatically.
Starting and stopping
the shower
While you are sitting on the shower toilet, briefly press the rotary
button on the right side to start the rear shower. Press the separate
button underneath the rotary button to start the lady shower.
A further press stops showering prematurely.
Spray intensity One turn forwards increases the jet intensity during the rear
and lady shower. One turn back reduces the jet intensity.
Shower jet position The position of the shower jet can be changed by pressing the
controller and simultaneously turning it forwards or backwards.
The shower arm follows the direction of rotation.
CONTROLLER WITH ROTARY BUTTON

7
Activate the touch screen remote control by pressing the start button at the top right.
When the remote control is activated for the first time, a setup program guides you through
the most important settings. The sanitary technician may have already commissioned the
WC after installation. As soon as you sit on the shower toilet, the appliance can be oper-
ated using the rotary button or remote control.
As soon as you sit on the Laufen shower
toilet, the odour extraction is activated. It
can be switched off at any time using the
remote control.
Remote Description
Black symbol Function is inactive/not in use.
White symbol Function is active/in use.
Description
Odour extraction
REMOTE CONTROL
STARTING APPLIANCE

8
Remote control Controller
Rear shower
Lady-Shower
Stop
Increase
spray intensity
Reduce
spray intensity
Extend spray arm
Retract spray arm
Power shower
press and
hold down
REAR SHOWER AND LADY SHOWER
After visiting the WC, you can start the rear
shower via the respective symbol on the
remote control or by a brief press on the
controller.
The lady shower enables natural cleansing
of the vaginal area. This is either triggered
by pressing the respective symbol on the
remote control or by a press on the sepa-
rate button underneath the rotary button.

9
LED display Information Description
White Normal operation Everything functioning correctly.
Red Care notice Please activate the remote control for further
information.
Red flashing Fault indication Please contact our service hotlineand have your
remote control ready for further instruction.
Alternate white
flashing
Care program
active
If the white LED display light flashes alternately,
decalcification or thermal cleaning is active.
LED DISPL AY
The LED display light underneath the appliance
throws light on the floor. It offers orientation when
visiting the WC during the night and notifies you
of required maintenance or possible malfunctions
on your shower toilet.
LED display

10
The Laufen shower toilet allows you to
save fourindividual user profiles.
Press "Shower settings". The settings
for the rear shower appear first.
Remote control
Shower settings
Rear shower
Lady shower
Save
REAR SHWR SETTINGS
20 sec.
You can adjust the jet intensity, the posi-
tion of the shower jet, the duration and
temperature of the shower according to
your personal requirements in this menu.
You can also activate or deactivate the
pulsating and oscillating function as well
as the odour extraction extraction.
USER PROFILES

11
After selecting your personal settings,
you can save the changes you made.
Press "Save" and select one of the 4 user
profiles ( I – IIII ) or the basic profile ( 0 ).
Remote control
Basic profile
User profile 1
User profile 2
User profile 3
User profile 4
LADY SHWR SETTINGS
20 sec.
You access the "Lady shower settings" menu
by pressing the respective symbol. You can
adjust the jet intensity, the position of the shower
jet and the shower duration here. You can also
activate or deactivate the pulsating and oscil-
lating function. The settings for shower temper-
ature and odour extraction are identical to the
settings of the rear shower.

12
REMOVE THE SEAT AND COVER
The seat and cover unit can be removed
to make the shower toilet easier to clean.
Simply lift the seat and cover to a vertical
position (about 85° in relation to the ceramic
surface) and pull both parts from the hinge.
IMPORTANT CLEANING INSTRUCTIONS
Avoid using powdery, corrosive, concentrated chlorinated and abrasive
cleaning agents and abrasive sponges, steel wool and steel cleaners.
MAINTENANCE AND CLEANING

13
Remote Control Description
Thermal
cleaning
Thermal cleaning flushes the entire water-carrying system on your shower
toilet with hot water to eliminate bacteria and germs. An illuminated
red LED display on the appliance and corresponding service information
on the remote control inform you that thermal cleaning is due. Corre-
sponding instructions on the remote control will guide you through the
program.
Decalcification The decalcification program descales all parts that carry water. Press
"Decalcification" to open the menu. An illuminated red LED display on the
appliance and corresponding service information on the remote control
inform you that decalcification is due. Corresponding instructions on the
remote control will guide you through the program. Please always use
original Laufendescaling agent.
MAINTENANCE

14
Measured wather hardness Setting on the appliance
< 15 °fH, < 8,4 °dH
< 15 °fH, < 8,4 °dH
15–25 °fH, 8,4–14 °dH
25–35 °fH, 14-19,7 °dH
> 35 °fH, > 19,7 °dH
> 35 °fH, > 19,7 °dH
1 sec
MEASURE THE WATER HARDNESS
Measure the water hardness at the place of installation using the enclosed test strip.
Hold the test strip in tap water for 1 second.
Shake the test strip and wait 60 seconds.
Compare the colour of the test strip with the table below.

15
SAVE THE WATER HARDNESS
The sanitary technician may have already commis-
sioned the settings during the remote control setup.
Activate the touch screen remote control by
pressing the start button at the top right.
Press "General settings" to access the default
settings. Select the measured water hardness
by pressing the "Water hardness" symbol
repeatedly. The following ranges are available
for selection:
< 15 °fH, < 8,4 °dH; 15–25 °fH, 8,4–14 °dH;
25-35 °fH, 14–19,7 °dH; > 35 °fH, > 19,7 °d
Press "Save".
Press "Menu" to return to the
main menu.
BASIC SETTINGS
SPECIAL FUNCTIONS
ECO
1
15-25°fH, 8,4-14°dH
English
WARRANTY
The warranty conditions for RIVA can be found at:
www.laufen-cleanet.com

All further information on the operation of your
Laufen shower WC can be found online at:
WWW.LAUFEN-CLEANET.COM