Toto Neorest SN982MR User manual

550H SN982MR
(MS982CUMG)
TCF9786WA
NEOREST
Instruction Manual
■ Thank you for your recent purchase of the TOTO NEOREST. Please read the enclosed
information to ensure the safe use of your product.
■ Be sure to read this Instruction Manual before using your product and keep it in a
safe place for future reference.
D08781S_EN.indb 1D08781S_EN.indb 1 11/12/2015 2:23:22 PM11/12/2015 2:23:22 PM

2
What functions available on your product?
Functions
NEOREST
Ref.
Page
SN982MR
TCF9786WA
Basic
Functions
Cleansing
Rear cleansing
●16
Rear soft cleansing
Front cleansing
Wide front cleansing
Changing the washing
method
Wand position adjustment
Water pressure adjustment
Oscillating cleansing
Pulsating cleansing
Personal setting lock
Drying Warm air drying ●16
Changing the temperature
Temperature adjustment ●24, 25
Sanitary
Functions
"ewater+" sanitizing
Auto wand cleaning
●
20, 21Auto bowl cleaning
Removing odors Deodorizer ●
Convenient
Functions
Flushing
Remote control bowl unit cleaning
●
17
Auto bowl unit cleaning 22, 23
Opening and closing
Opening and closing the toilet
seat with remote control
●
17
Auto open / close (lid)
22, 23
Lighting up Soft light
Heating the toilet seat Heated seat ●-
Saving energy
Timer energy saver
●26, 27
Auto energy saver
Maintenance
Bowl unit cleaning
●
32
Cleaning lift lever 33
Removable toilet lid 34
Wand cleaning 37
* Combination model number is for U.S. only.
The model name and part number are indicated on the bottom side of the toilet lid.
Product model number
Top unit + Bowl unit = Combination model number *
SN○○○○
TCF○○○○
CT○○○○
CW○○○○
MS○○○○
Model
Part No.
D08781S_EN.indb 2D08781S_EN.indb 2 11/12/2015 2:23:23 PM11/12/2015 2:23:23 PM

3
Safety Precautions .................... 4
Operational Precautions.......... 11
Parts Names ........................... 12
Preparation.............................. 14
Changing Settings ................... 40
What to Do?............................. 52
●
If there is no water due to a power
outage or water failure ..............
52
●If you cannot operate with the
remote control ...................... 52
●
Freeze Damage Prevention ... 53
●Long Periods of Disuse........ 54
Troubleshooting....................... 56
Specifications .......................... 64
Warranty.................................. 66
Basic Operations ..................... 16
Automatic Functions
(Cleaning Features)................. 20
DEODORIZER, AUTO WAND CLEANING,
AUTO BOWL CLEANING, BOWL LIGHT,
CLEAN INDICATOR
Automatic Functions
(Convenience Features).......... 22
AUTO FLUSH, AUTO OPEN/CLOSE,
SOFT LIGHT
Temperature Adjustment......... 24
Energy Saver Features............ 26
Power Plug .............................. 30
Top Unit................................... 31
Bowl Unit ................................. 32
Bowl Unit cleaning
Gap of the Top Unit ................. 33
Water Filter Drain Valve .......... 35
Deodorizing Filter .................... 36
Wand ....................................... 37
Wand cleaning
Water filter ............................... 38
Table of Contents
Cleaning
Support
Sanitary Toilet
The "ewater+" feature keeps the toilet bowl clean at all times.
The self-cleaning functions operate
automatically.
(See pages 20 and 21 for details.)
As you approach
and sit
 A mist is sprayed in
the bowl unit to make it
more difficult for dirt to
adhere.
 When you sit on
the toilet seat, the
deodorizer operates.
 The wand is cleaned
with "ewater+".
(The wand extends and
then retracts.)
 "ewater+" is sprayed in
the bowl unit to maintain
cleanliness.
As you stand up
ReferenceMaintenanceOperation
Introduction
D08781S_EN.indb 3D08781S_EN.indb 3 11/12/2015 2:23:23 PM11/12/2015 2:23:23 PM

4
IMPORTANT SAFEGUARDS
READ ALL INSTRUCTIONS BEFORE USING
Symbols and Meanings
WARNING May result in death or serious injury.
CAUTION May result in injury or property damage.
The following symbols are used to indicate important safety instructions for the use of the product.
Symbol Meaning
This symbol indicates a prohibited use of the product.
This symbol is used to indicate a required step in the use of this product.
 This product is classified as Class 1 Equipment and must be grounded.
 Install this equipment where the electrical outlet is accessible.
 This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
 Use the new hose set included with this equipment. Do not reuse an old hose set.
WARNING
Do not plug or unplug the power plug with wet hands.
 Doing so may cause electrical shock.
Do not get any water or cleaning solution on the top unit or power plug.
 Doing so may cause fire, electrical shock, heat or short circuit.
 Doing so may cause the product to crack resulting in injury or water damage.
Never disassemble, repair or alter.
 Doing so may cause fire, electrical shock, heat or short circuit.
Do not install the product on moving vehicles such as wheeled vehicles or boats.
 Doing so may cause fire, electric shock, short circuit or malfunction.
 The toilet seat, toilet lid, top unit or other parts may come loose and fall off, resulting in injury.
Safety Precautions
D08781S_EN.indb 4D08781S_EN.indb 4 11/12/2015 2:23:23 PM11/12/2015 2:23:23 PM

5
WARNING
Do not use the NEOREST if a malfunction occurs.
Always unplug the plug from the outlet.
Switch the breaker on the distribution board to OFF. (Asia, Oceania, Middle East)
 Close the water shutoff valve to stop water supply.
Possible malfunctions:
 Water is leaking from a pipe or the top unit.
 The product is cracked or broken.
 The product makes a strange noise or emits a strange odor.
 The product emits smoke.
 The product is abnormally hot.
 The bowl unit is clogged.
 The toilet seat cushion is out of place.
 Continued use after malfunction could cause a fire, electric shock, heat, short circuit, injury or
water damage.
Only use tap water or potable well water (underground water).
Do not use seawater.
 Doing so may cause irritation to the skin and malfunction.
Do not touch the power plug during thunderstorms.
 Doing so may cause electrical shock.
Do not allow the water supply hose to touch the power plug or outlet.
 Doing so may cause condensation resulting in a fire, electrical shock, heat or a short.
Do not do anything that may damage the power cord, power plug.
Do not strike, yank, twist, excessively bend, damage, alter, or heat the electrical cords. Also, do
not place anything heavy on, bind or pinch the electrical cords.
 Using a damaged electrical cord may result in a fire, electrical shock, heat or short.
Do not use a loose or faulty electrical outlet.
 Doing so may cause fire or short circuit.
Do no use any outlet or wiring equipment beyond its specified rating.

Plugging too many plugs into the same outlet, for example using outlet splitters, can cause fire due to heat.
Do not use any power supply other than the one specified.
Product model number : SN*** (North, Central, South America)
AC 120V, 60Hz
Product model number : TCF*** (Asia, Oceania, Middle East)
AC 220V, 50Hz / 60Hz
 Doing so may cause fire or excessive heat.
Do not stick a finger or anything else into the warm air outlet.
Do not place anything on the warm air outlet or drape clothes over it.
 Doing so may cause burns, electrical shock or malfunction.
Keep cigarettes and other open flames away from the product.
 Failure to do so may cause fire.
IntroductionIntroduction
D08781S_EN.indb 5D08781S_EN.indb 5 11/12/2015 2:23:23 PM11/12/2015 2:23:23 PM

6
WARNING
Beware of irritation or burn.
 Improper use of the toilet seat may cause irritation or burn.
When sitting for a long time on the toilet seat, switch the toilet seat temperature adjustment to "OFF".
When any of the following persons use a heated seat or warm air drying, someone should switch
the toilet seat temperature adjustment to "OFF" and switch the drying air temperature to "Low".

Young children, the aged and other users unable to set the temperature appropriately themselves.
 The ill, physically disabled and others who do not have freedom of movement.
 Those using any medicines that cause drowsiness (sleeping or cold medicine), those who have
been drinking heavily, anyone severely fatigued and anyone else liable to fall asleep.
This is an electrical product. Do not install it anywhere water is likely to get on
the product or anywhere with humidity high enough that water is likely to form
on the surface of this product. When using the product in a bathroom, install
a fan or ventilation port and ensure good air flow through the bathroom.
 Failure to do so may cause fire or electrical shock.
Always connect the NEOREST to the cold water supply.
 Connecting to hot water supply may result in burns and equipment damage.
Check that an appropriate ground is installed. (Asia, Oceania, Middle East)
 If the ground is not installed, if there is a breakdown or electrical current leak, the lack of a
ground could cause electrical shock.
For the ground, use copper wire with a ground resistance of 100 Ωmax. and a diameter of 1.6 mm (0.005 ft ) min.
* If there is no ground installed, ask the contractor who did the installation to install the ground.
Make sure that a properly grounded (3 prong) outlet has been installed.

Failure to install a grounded outlet could cause electrical shock in the event of a malfunction or short circuit.
Check that the outlet for electrical power is as follows. (Asia, Oceania, Middle East)
 Failure to do so may cause fire or electrical shock.
a.Protect the outlet circuits with a high-sensitivity quick leakage switch (with a rated current
sensitivity of 15mA or less) or an insulating transformer (1.5kVA min., 3kVA max.).
b. Install the outlet and plug positioned at least 0.8 m (2.62 ft) above the floor and as far as possible from the bathtub.
* Check that the wiring in a. and b. above is complete. If the wiring has not been completed, ask
the contractor who did the installation to do it.
Insert the power plug securely into the outlet. (North, Central, South America)
 Failure to do so may cause fire, heat or short circuit.
Check that the power plug is waterproofed with silicone rubber. (Asia, Oceania, Middle East)
 A power plug that is not water-proofed may cause fire and electrical shock.
* If the power plug is not water-proofed, ask the contractor who did the installation to water-proof it.
To unplug, hold the plug, not the cord.
Do not unplug by pulling the cord.
 Pulling on the cord may cause damage and result in fire or heat.
If the electric cord is damaged, avoid danger by having the manufacturer’s
repair department or equivalent specialist replace it.
Always disconnect the power plug from the outlet before cleaning,
maintenance or inspection.
Always switch the breaker on the distribution board to OFF. (Asia, Oceania, Middle East)
 Failure to do so may cause electrical shock or malfunction.
* Except when using "Wand cleaning" or "Bowl unit cleaning".
Periodically remove dust and dirt from the electrical plug and make sure it is
securely plugged into the wall outlet. (North, Central, South America)
 Failure to do so may cause fire, heat or short circuit.
Pull the plug out from the outlet and wipe clean with a dry cloth.
Safety Precautions (Continued)
D08781S_EN.indb 6D08781S_EN.indb 6 11/12/2015 2:23:23 PM11/12/2015 2:23:23 PM

7
CAUTION
Do not use the product if the top unit is unstable.
 Doing so may cause the top unit to come loose and fall, resulting in injury.
If the product is damaged, do not touch the damaged section.
 Doing so may cause electrical shock or injury.
Replace it immediately.
Do not apply strong force, mechanical shock, step on or stand on the toilet
seat, toilet lid or top unit. Also do not place any heavy object on the toilet
seat, toilet lid or top unit.
 Doing so could cause cracking or cause the top unit to come loose and fall resulting in injury.
 Doing so could damage the product and cause injury or water damage.
Do not lift up this product by the toilet seat or lid.
Do not raise the toilet seat or lid while objects are resting on top of the toilet.
 Doing so could cause the top unit to come loose and fall resulting in injury.
When cleaning or maintaining the plastic parts (top unit etc.) or the water
supply hose, use a kitchen cleaner diluted with water. Do not use any of the
following.
Toilet cleaner, household cleaner, benzene, paint thinner, powdered cleanser or nylon scrubbing pads.
 These items may damage or crack the plastic and cause injury or malfunction.
 These items could damage the water supply hose and cause a water leak.
To prevent a sudden water leak, do not remove the water filter drain valve
when the shutoff valve is open.
 Doing so will cause water to spurt out.
(Refer to Page 35 for instructions on cleaning the water filter drain valve.)
Do not fold or crush the water supply hose; do not damage by cutting with a
sharp object.
 Doing so may cause water leaks.
Do not pour hot water into the toilet.
 Doing so may result in damage to the toilet, injury or water damage.
WARNING
Preliminary studies in females suggest that overuse of continuous spraying
can increase the possibility of vaginal mucosa drying and potential
reduction in desirable microbial organisms.
Although these studies have not been validated, please consult your
healthcare provider for concerns regarding whether these circumstances
may apply to you.
More importantly, if you are an individual suffering from any immune
deficiency as a result of disease, chemotherapy, or other medical condition
compromising the immune system you should consult your healthcare
provider before use of this product.
IntroductionIntroduction
D08781S_EN.indb 7D08781S_EN.indb 7 11/12/2015 2:23:23 PM11/12/2015 2:23:23 PM

8
Safety Precautions (Continued)
CAUTION
Do not flush anything other than bodily waste and toilet paper. Also, do not
flush too much toilet paper.
 Doing so may clog the toilet, causing waste water overflow and water damage.
When operating the lift lever for cleaning, do not insert your fingers into the
gap between the top unit and the bowl unit.
Do not use the product while the top unit is lifted up.
If a water leak should occur, always close the shutoff valve.
When the ambient temperature is likely to drop to 0°C (32°F) or lower,
prevent damage to the pipes and hoses due to freezing.
 Frozen water pipes could cause the top unit and the pipes to break, resulting in a water leak.

Regulate the room temperature to prevent the pipes and hoses from freezing during cold months.
When not using the NEOREST over an extended period of time, drain the
water out of the top unit and the water supply hose, and pull the electrical
plug from the outlet.
Switch the breaker on the distribution board to OFF. (Asia, Oceania, Middle East)
 When using the product again, allow the product to refill with water first.
Otherwise, the water in the tank might become contaminated and cause skin inflammation or
other problems. (Refer to Page 55 for instructions on resupplying the water.)
 Leaving the power on may cause fire or heat.
When installing the water filter drain valve, make sure that it is securely
tightened in its proper position.
 Failure to securely tighten it may cause a water leaks.
If the bowl unit is clogged, disconnect the power plug and remove the clog.
Switch the breaker on the distribution board to OFF and remove the clog.
(Asia, Oceania, Middle East)
 If the auto flush were allowed to function, it would make the wastewater in the bowl unit overflow
and may result in water damage.
 Use any commonly available toilet plunger to remove the clogging.
Always flush, even after just urinating.
 Failure to do so may cause inadequate flushing or clogging of the bowl unit, resulting in waste
water overflow and water damage.
Wipe condensation on the bowl unit, tank, water supply pipe and shutoff
valve with a dry cloth.
 Condensation may cause staining and corrosion of the floor.
 Ventilate the restroom to prevent condensation.
Wipe any urine, condensation, cleaner, water, etc. that has gotten on the
floor with a well-wrung mop or cloth.
 Failure to do so may cause staining and corrosion of the floor.
D08781S_EN.indb 8D08781S_EN.indb 8 11/12/2015 2:23:24 PM11/12/2015 2:23:24 PM

9
DANGER To reduce the risk of electrocution:
1. Do not use while bathing.
2. Do not place or store the product where it can fall or be pulled into a tub or sink.
3. Do not place in or drop into water or other liquid.
4. Do not reach for the product when it has fallen into water. Unplug it immediately.
WARNING To reduce the risk of burns, electrocution, fire or injury to persons:
1. Close supervision is necessary when this product is used by, on, or near children or
invalids.
2. Use this product only for its intended use as described in this manual. Do not use
attachments not recommended by the manufacturer.
3. Never operate this product if it has a damaged cord or plug, is not working properly, has
been dropped or damaged, or has been dropped in water. Return the product to a service
center for examination and repair.
4. Keep the cord away from heated surfaces.
5. Never block the air openings on the product or place it on a soft surface, such as a bed
or couch, where the air openings may be blocked. Keep the air openings free of lint, hair,
and other similar items.
6. Never use while sleepy or drowsy.
7. Never drop or insert any object into any opening or hose.
8. Do not use outdoors. Do not operate where aerosol (spray) products are being used or
where oxygen is being administered.
9. Connect this product to a properly grounded outlet only.
See "Grounding Instructions" in Page 10.
10. The tank should be filled with water only.
 Servicing should be performed by an authorized service representative.
 This product is for household use.
IntroductionIntroduction
D08781S_EN.indb 9D08781S_EN.indb 9 11/12/2015 2:23:24 PM11/12/2015 2:23:24 PM

10
Grounding Instructions
This product should be grounded. In the event of an electrical short circuit, grounding
reduces the risk of electric shock by providing an escape wire for the electrical current.
The plug must be plugged into an outlet that is properly installed and grounded.
DANGER - Improper use of the grounding plug can result in a risk of electric shock.
If repair or replacement of the cord or plug is necessary, do not connect the grounding wire
to either flat-head terminal.
Check with a qualified electrician or serviceman if the grounding wire instructions are not
completely understood, or if in doubt as to whether the product is properly grounded.
This product is factory equipped with a specific electric cord and plug to permit connection
to a proper electric circuit. Make sure that the product is connected to an outlet having the
same configuration as the plug.
No adapter should be used with this product. Do not modify the plug provided - if it will not fit
in the outlet, have the proper outlet installed by a qualified electrician.
If the product must be reconnected for use on a different type of electric circuit, the
reconnection should be made by qualified service personnel.
If it is necessary to use an extension cord, use only a three wire extension cord that has a
three blade grounding plug, and a three-slot receptacle outlet that will accept the plug on the
product.
Replace or repair a damaged cord.
For Asia, Oceania, Middle East
Confirm that the earthing wire is securely connected.
Grounding pin
SAVE THESE INSTRUCTIONS
Safety Precautions (Continued)
D08781S_EN.indb 10D08781S_EN.indb 10 11/12/2015 2:23:24 PM11/12/2015 2:23:24 PM

11
Operational Precautions
■ For prevention of damage
● Wipe plastic areas such
as the top unit and
remote control with a
soft, wet cloth. Dry cloth or tissue
● Do not lean against the
toilet lid.
■ Problem Prevention
● Disconnect the power plug if there is a risk of lightning.
Switch the breaker on the distribution board to OFF.
(Asia, Oceania, Middle East)
● A toilet seat cover or a toilet lid cover cannot be used.
(The body sensors or seat switch may not function properly.)
Covers
● Do not urinate on the top unit, toilet seat or wand.
(Doing so may cause pink or brown stains or a malfunction.)
● Do not apply strong forces to the control panel of the
remote control.
● When using a toilet cleaner to clean the toilet, wash it off
within 3 minutes and leave the toilet seat and toilet lid open.
Wipe off any cleaner that remains on the toilet bowl.
(If vapor from a toilet bowl cleaner enters the top unit, it may
cause a malfunction.)
● Do not expose to direct sunlight.
(Doing so may cause changes in color, irregular
heated seat temperature, remote control malfunction or
NEOREST malfunction due to the change in temperature.)
● Use radios, etc. away from the NEOREST.
(The NEOREST could cause interference with the radio signal.)
● If you use a booster seat for infants or a soft highchair,
remove it after use.
(Keeping it installed may prevent some of the functions
from being used.)
● Do not apply force to the remote control.
(May cause malfunction.)
To prevent the remote control from being dropped, set it
in the hanger when you are not using it. Be careful not
to expose it to water.
■ For prevention of malfunctions
● Do not block the body sensor or the remote control transmitter
or receiver.
< About the body sensors >
Two types of body sensors are used.
● Body sensor A detects changes in heat.
 Detection may be difficult when the room temperature
exceeds 30°C (86°F), such as in the summertime.

When sunlight is directly on the sensor area or a heater is
used in the bathroom, the sensor may detect incorrectly
due to the heat, resulting in the automatic operation of
functions such as auto lid opening and closing.

When the bathroom door is open, the sensor may detect
people who pass to the front or side of the toilet.
● Body sensor B detects when someone stands in front
of the toilet bowl.
 Body sensor B emits an infrared beam as shown in
the figure. When a person moves into the range of
this infrared beam, the sensor detects the person.
*Detection by the sensor may be difficult when the toilet
is used by someone small, such as a child.
Body sensor A Body sensor B
< About the seat switch >
● When you sit on the toilet seat, the seat switch turns ON,
enabling you to use various features.
(A click sound is heard when the seat switch is ACTIVATED.)
Seat switch
(Built-in)
Switch
ON Gap
The toilet seat lowers.
● Sit back on the toilet seat.
 The seat switch will not turn on unless you sit
on the seat properly.
Note
 When a child uses the NEOREST, the seat
switch may not be ACTIVATED by their light
body weight.
 Since the toilet seat is designed to move up
and down, a clearance is provided between the
toilet seat cushion and the toilet bowl.
IntroductionIntroduction
D08781S_EN.indb 11D08781S_EN.indb 11 11/12/2015 2:23:24 PM11/12/2015 2:23:24 PM

12
Parts Names
Seat switch (Built-in)
Toilet lid
Model name,
part no., etc.
Heated seat
Bowl unit (Page 32)
* Use in situations such as when the remote controller
batteries have discharged.
POWER ON/OFF
FRONT ON/OFF
FLUSH
REAR ON/OFF
Power plug
（Page 15）
Shutoff valve
(Page 15)
Main display
POWER LED
SEAT LED
CLEAN indicatorENERGY
SAVER LED
Warm air outlet cover
Wand cover
Wand
Soft light
Body sensor A (Page 11)
Control panel
Remote control
receiver
Water filter
(Internal parts of the
water supply valve)
(Page 38)
D08781S_EN.indb 12D08781S_EN.indb 12 11/12/2015 2:23:25 PM11/12/2015 2:23:25 PM

13
Toilet lid and toilet seat underside
Water drain lever
(Page 54)
Cover
Toilet seat cushions
Left side of top unit
Water filter drain valve (Page 35)
Right side of top unit
Deodorizing filter (Page 36)
Deodorizer vent
Remote control receiver
Cleaning lift lever
(Page 33)
Toilet lid cushion
Sewage-block packing
Body sensor B
(page 11)
IntroductionIntroduction
D08781S_EN.indb 13D08781S_EN.indb 13 11/12/2015 2:23:25 PM11/12/2015 2:23:25 PM

14
Preparation
Using the Product for the First Time
If the remote control is secured
(for anti theft)
1Remove the screws (2, left
and right) from the remote
control fixture.
Remote
control
Remove
Hanger
Screw
(2 pieces,
left and right)
Wall
㧔View from side㧕
Phillips
screwdriver
(Fine-tip type)
2Remove the remote control
from the hanger.
Remote
control
Hanger
Wall
■ To secure the remote control again
Tighten and fix the screws (2, left and right).
(Overtightening may cause damage to parts
such as the hanger.)
1.Insert the battery
1Remove the remote control
from the hanger.
Remote control
Hanger
2Open the battery cover and
insert two AA batteries.
Battery cover
Close
Open
● When batteries are properly inserted,
temperature levels appear on the display of
the remote control (back side).
● The display goes out when no button on the
remote control is pressed for 1 minute or
more.
WATER TEMP
SEAT TEMP
DRYER TEMP
3Mount the remote control in
the hanger.
■ About the batteries
● Use dry cell, alkaline batteries. Follow the instructions
below to prevent the batteries from rupturing or
leaking fluid.
When replacing the batteries, use new batteries of
the same brand.
If you will not be using the remote control for a long
time, remove the batteries.
Do not use rechargeable batteries.
D08781S_EN.indb 14D08781S_EN.indb 14 11/12/2015 2:23:26 PM11/12/2015 2:23:26 PM

15
2.Turn on the power
1Insert the power plug.
Switch the breaker on the
distribution board to ON.
(Asia, Oceania, Middle East)
• The wand extends and then retracts.
2Check that the POWER LED
on the main display is lit up.
• If it does not light up, press [POWER
ON/OFF] to light it up.
To turn the power "OFF"
Press [POWER ON/OFF] to
turn the power off.
• The POWER LED goes off.
3.Open the shutoff valve
1Remove the side-panel.
2Fully open the shutoff valve.
<For water supply from floor>
<For water supply from wall>
3Reinstall the side-panel.
IntroductionIntroduction
D08781S_EN.indb 15D08781S_EN.indb 15 11/12/2015 2:23:27 PM11/12/2015 2:23:27 PM

Press a button on the remote control; a beep sounds when the top unit receives the signal.
Cleansing
Drying
Stopping
[STOP]
Stops the operation.
[WIDE]ޓGently washes a wide area.
[REAR] Cleanses your rear.
[SOFT]ޓWashes your rear with soft embracing water flow.
[FRONT]ޓServes as a bidet for ladies.
[DRYER]ޓDries your rear.
[PRESSURE]
●You can adjust the water pressure to one of five levels. ("-": Softer, "+": Stronger)
● When you press the button to flush, the position returns to the standard position(3rd position).
●If you do not want to return the wand to the standard position. (Page 50)
[OSCILLATE]
●The wand moves back and forth to wash
your rear thoroughly.
●The setting changes between "ON" and
"OFF" each time the button is pressed.
[PULSATE]
● Washes with the water pressure
pulsating between soft and
strong.
●The setting changes between
"ON" and "OFF" each time
the button is pressed.
[POSITION]
●You can adjust the position to one of five positions.
([▲] to the front, [▼] to the rear)
●When you press the button to flush, the position
returns to the standard position (3rd position).
●If you do not want to return the wand to the
standard position.(Page 50)
●Functions that operate when a button is pressed
during "REAR", "SOFT", "FRONT", or "WIDE"
cleansing.
●Sitting back on the toilet seat makes it easier to
adjust the wand position and to reduce splashing.
Note
Low battery warning LED
(Page 52)
[USER1] / [USER2]
You can store your preferred wand position, water pressure and
water temperature a setting.
●To store a setting
ޓ While cleansing is in progress, set your preferred wand position,
water pressure, and warm water temperature, and then press
and hold [USER 1] or [USER 2] for 2 seconds or longer.
●To use
Press [USER 1] or [USER 2], and then press the button for
the cleansing you want to use.
PERSONAL SETTING
16
Basic Operations
D08781S_EN.indb 16D08781S_EN.indb 16 11/12/2015 2:23:28 PM11/12/2015 2:23:28 PM

When flushing and opening/closing the toilet seat with the remote control
Flushing
Opening
and closing
Perform a flush.
[FLUSH]
Perform a light flush.
[FLUSH]
[]Opens and closes the toilet seat.
Remote control back side
Display screen
●Adjust settings, check status, etc.
The display goes out when no button on the
remote control is pressed for 1 minute or more.
MENU/RETURN button
●Adjust settings
●Return to previous menu
Temperature adjustment
button
●Adjust temperatures
17
ReferenceMaintenanceOperation
Introduction
Operation
D08781S_EN.indb 17D08781S_EN.indb 17 11/12/2015 2:23:28 PM11/12/2015 2:23:28 PM

MENU
1.MANUAL CLEANING
2.ENERGY SAVER
1/4
1.MANUAL CLEANING
2.ENERGY SAVER
3.AUTO FUNCTION
4.OTHER SETTING
MENU
SELECT [●ENTER] PUSH
1/4
[●ENTER] PUSH
SELECT
This section is an overview
of the settings that can be
configured with the remote
control.
●See the corresponding pages
for the detailed descriptions.
Set up easily with simple steps!
: Select an item
: Select a setting
: Confirm
MENU/RETURN
button
Remote control back side
Number of items
on display
18
Basic Operations
About the Menu Screen
D08781S_EN.indb 18D08781S_EN.indb 18 11/12/2015 2:23:28 PM11/12/2015 2:23:28 PM

1.AUTO WAND CLEAN
2.AUTO BOWL CLEAN
3.DEODORIZER
AUTO CLEANING
1/3
1.TIMER SAVER
TIMER SAVER
1/1
1.ANTI FREEZING
2.BEEP
3.
PERSONAL SETTING LOCK
4.PRESSURE /POSITION
SETTING
OTHER SETTING
1/4
1.AUTO OPEN/CLOSE
2.AUTO CLOSE DELAY
3.AUTO OPEN DELAY
4.SEAT/LID
AUTO OPEN/CLOSE
1/4
1.SOFT LIGHT
2.BOWL LIGHT
3.INDICATOR
LIGHT
1/3
1.AUTO ENERGY SAVER
2.TIMER SAVER
ENERGY SAVER
1/2
1. BOWL CLEANING
2. WAND CLEANING
MANUAL CLEANING
1/2
ON/OFF
ON/OFF
1.AUTO FLUSH
2.AUTO FLUSH DELAY
AUTO FLUSH
1/2
1.AUTO FLUSH
2.AUTO OPEN/CLOSE
3.AUTO CLEANING
4.LIGHT
AUTO FUNCTION
1/4
*
* With the SN982MR, the display appears but settings cannot be made.
Level 1 Level 2
19
ReferenceMaintenanceOperation
Introduction
Operation
D08781S_EN.indb 19D08781S_EN.indb 19 11/12/2015 2:23:28 PM11/12/2015 2:23:28 PM

20
As you
approach As you sit As you stand up
DEODORIZER
Starts the
deodorizer
Deodorizer stops
➝It stops after about 2 minutes
Cleans the wand
automatically
➝
After about 25 seconds,
the wand extends and
"ewater+" * comes out
from the base of the
wand.
(Only when the cleansing
functions are used.)
Clean the wand
automatically with
"ewater+" *
AUTO WAND
CLEANING
Sanitize the bowl unit
with "ewater+" *
AUTO BOWL
CLEANING
Pre-mist
(A mist is sprayed inside the bowl unit to
make it more difficult for dirt to adhere.)
After-mist
➝
After the automatic
wand cleaning is
finished, "ewater+" *
mist is sprayed inside
the bowl unit.
BOWL LIGHT
(Lights up during pre-mist) (Lights up during auto wand cleaning and after-mist)
INDICATOR
(Lights up) (Lights up in a cycle)
Automatic Functions Cleaning Features
"ewater+" *is used automatically to clean the wand and
bowl unit.
D08781S_EN.indb 20D08781S_EN.indb 20 11/12/2015 2:23:28 PM11/12/2015 2:23:28 PM