LAZBOY Addyson User manual

Addyson Square Dining Table
Owner’s Manual
Page 1 of 4
If you have any problems with this product, DO NOT RETURN IT TO THE STORE.
CALL OUR CUSTOMER SERVICE HOTLINE AT
877-592-7514
Monday – Friday, 8AM-5PM (EST)
La-Z-Boy® is a registered trademark of La-Z-Boy Incorporated and is used under license to BJI,
Inc. © 2019 La-Z-Boy Incorporated.

Care and Maintenance
Be careful to never allow water to build up in frames as this will cause corrosion and freeze damage in cold climates. Wash all
frames with a solution of mild soap and water. Rinse with clean water and dry with a soft absorbent cloth towel. Frames can be
treated with a liquid wax for maximum protection against UV rays and/or salty damp air. If your set includes cushions, slings,
and/or an umbrella they may be cleaned by hand with a solution of soap and water with a clean water rinse. (Never machine
wash cushions, slings or umbrella covers as this will result in shrinkage or damage).
After cleaning cushions tip on end and allow to drip dry. (Never use a commercial or home dryer to tumble dry fabric goods).
Do not use bleach or solvents to clean any product! This will void the warranty.
Lack of original receipt will void warranty!
CAUTION: Read all the instructions before assembly. Failure to do so may result in faulty assembly and potential injury!
Assemble product on a soft, non-abrasive surface such as a carpet or cardboard to avoid damaging the item. Seek assistance to
assemble bulky or heavy items. After final alignment, make sure all bolts and nuts are securely tightened with screw head covers
pressed in place.
Note: Do not allow children to play with plastic wraps or small parts to prevent potential choking hazard.
Page 2 of 4
For warranty and other helpful information, please visit www.lazboyoutdoor.com or call 1-877-592-7514, Monday-Friday,
8AM-5PM (EST)or email us at [email protected].

PARTS
NO. PARTS NAME PARTS QTY
ATable top
1
BTable leg 4
Bolt M6 x 20mm
16
M6 Washer 16
M6 Wr
ench
16
Page 3 of 4
M6 Pla
stic ca
p
AA
BB
CC
1
DD
PARTS LIST

Figure 1
Figure 2
Page 4 of 4
Assembly Steps:
Step 1. Attach table legs (B) to table top (A) wit h bolts (AA) and washers (BB).
Cover bolts with bolt caps (CC). See Figure 1.
Step 2. Turn the table upright. Now your table is ready for your enjoyment.
See Figure 2.

Addyson Sling Stationary Chair
Owner’s Manual
Page 1 of 5
If you have any problems with this product, DO NOT RETURN IT TO THE STORE.
CALL OUR CUSTOMER SERVICE HOTLINE AT
877-592-7514
Monday – Friday, 8AM-5PM (EST)
La-Z-Boy® is a registered trademark of La-Z-Boy Incorporated and is used under license to BJI,
Inc. © 2019 La-Z-Boy Incorporated.

Page 2 of 5
For warranty and other helpful information, please visit www.lazboyoutdoor.com or call 1-877-592-7514, Monday-Friday,
8AM-5PM (EST)or email us at [email protected].
Care and Maintenance
Be careful to never allow water to build up in frames as this will cause corrosion and freeze damage in cold climates. Wash all
frames with a solution of mild soap and water. Rinse with clean water and dry with a soft absorbent cloth towel. Frames can be
treated with a liquid wax for maximum protection against UV rays and/or salty damp air. If your set includes cushions, slings,
and/or an umbrella they may be cleaned by hand with a solution of soap and water with a clean water rinse. (Never machine
wash cushions, slings or umbrella covers as this will result in shrinkage or damage).
After cleaning cushions tip on end and allow to drip dry. (Never use a commercial or home dryer to tumble dry fabric goods).
Do not use bleach or solvents to clean any product! This will void the warranty.
Lack of original receipt will void warranty!
CAUTION: Read all the instructions before assembly. Failure to do so may result in faulty assembly and potential injury!
Assemble product on a soft, non-abrasive surface such as a carpet or cardboard to avoid damaging the item. Seek assistance to
assemble bulky or heavy items. After final alignment, make sure all bolts and nuts are securely tightened with screw head covers
pressed in place.
Note: Do not allow children to play with plastic wraps or small parts to prevent potential choking hazard.

Right Arm Panel
Seat Panel
Back Panel
Left Arm Panel
Bolt M6x20mm
M6 Washer
M6 Plastic Cap
1
1
1
1
1
8
4
12
12
2
CC
DD
EE
AA
BB
Page 3 of 5
Bolt M6x30mm
Connect Bar
M6-M8 Wrench
PARTSNO. PARTS NAME PARTS QTY
PARTS LIST

Step 1. Attach the seat panel (C) and connet bar (E) to left arm panel (A) and right
arm panel (B) with bolts (AA)(BB) and washers (CC) by using wrench (EE), cover the
bolts with plastic caps(DD). See Figure 1.
Page 4 of 5
Step 2. Attach the back panel (D) to arm panel (A)(B) with bolts (AA) and washers(CC) by
using wrench (EE), cover the bolts with plastic caps (DD). See Figure 2.
Ｅ
Figure 1
Figure 2
Ｄ

Step 3. Turn the chair upright, now your chair is ready for your enjoyment. See Figure 3.
Page 5 of 5
Figure 3