LAZBOY D71 M18451 User manual

OWNER’S MANUAL
Sears McKenna 3PC Bistro Set
* Bistro Table
Product Code: D71 M18451
UPC Code: 7-22938-09161-4
Date of Purchase: / /
If you have any problems with this product, DO NOT RETURN TO THE STORE.
CALL OUR CUSTOMER SERVICE HOT-LINE AT
1 866-391-4868
8AM-5PM (EST), Monday – Thursday,
8AM-4PM (EST), Friday.
View the expanded assortment of outdoor living product on-line at
www.lazboyoutdoor.com and www.sears.com
La-Z-Boy® is a registered trademark of La-Z-Boy Incorporated and is used under license to BJI, Inc.
© 2013 La-Z-Boy Incorporated.
Page 1 of 4

WARRANTY
In order to activate your warranty please register at www.bjifurniture.com. There you can review our full warranty details
and other helpful information. Or, you may call us at 1 866-391-4868, 8am - 5pm (EST), Monday – Thursday, 8am – 4pm(EST),
Friday.
Care and Maintenance
Be careful to never allow water to build up in frames as this will cause corrosion and freeze damage in cold climates. Wash all frames
with a solution of mild soap and water. Rinse with clean water and dry with a soft absorbent cloth towel. Frames an be treated with a
liquid wax for maximum protection against UV rays and/or salty damp air. If your set includes cushions, slings, and/or an umbrella
they may be cleaned by hand with a solution of soap and water with a clean water rinse. (Never machine wash cushions, slings or
umbrella covers as this will result in shrinkage or damage).
After cleaning cushions tip on end and allow to drip dry. (Never use a commercial or home dryer to tumble dry fabric goods).
Do not use bleach or solvents to clean any product! This will void the warranty.
CAUTION: Read all the instructions before beginning assembly.
Failure to do so may result in faulty assembly and potential injury!
Assemble the item on a soft, non-abrasive surface such as a carpet or cardboard to avoid damaging the item.
Seek assistance to assemble bulky or heavy items.
After final alignment, make sure all bolts, nuts and nut covers are securely tightened.
Assembly Instruction:
A 1 x Table Rim
B 4 x Leg
C
8 x M6*30mm
Bolt
D 8 x Washer
E 8 x PE Cap
F 1 x Hex Wrench
1
Repeat procedure for three remaining table legs. NOTE: DO NOT tighten the bolts completely at this step.
Page 2 of 4

G 1 x Connector
C
8 x M6*30mm
Bolt
D 8 x Washer
E 8 x PE Cap
F 1 x Hex Wrench
2
Repeat procedure for three remaining table legs. NOTE: Once all bolts are in place tighten completely.
H 4 x Tile
3
Page 3 of 4

Now the bistro table is ready for your enjoyment!
WARNING:
1. Do not crawl, stand, or sit on tile table tops.
2. Do not set or lay heavy items on tile table tops.
3. Avoid extreme hot & cold items being placed on tile table tops.
Page 4 of 4