LeapFrog Build-a-Waffle Learning Set User manual

Instruction Manual
This manual contains important information. Please keep it for future reference.
Build-a-Waffle Learning Set
Build-a-Waffle Learning SetBuild-a-Waffle Learning Set Build-a-Waffle Learning Set
TM

2
INTRODUCTION
Thank you for purchasing the Build-a-Waffle Learning Set™.
Encourage learning and pretend play with 13 play pieces and an
interactive waffle set that introduces numbers, counting and
colours.
Guided activities build early language and listening skills. Create a
delicious waffle breakfast with toppings. Serve it up on the plate,
pick up the fork and knife, and dig in!
Off/Low/High
Volume Switch
Cooking Dial
Music
Button
Numbers and
Colours Activities
Button
Games and
Activities Button
Cooking Button
4 Waffle
Sensors

3
INCLUDED IN THE PACKAGE
1 waffle maker
1 syrup bottle
1 strawberry
topping
1 fork
2 double-sided
brown/tan waffle
pieces
1 whipped cream
topping
1 kiwi
topping
1 knife
2 double-sided
pink/tan waffle
pieces
1 butter
topping
1 blueberry
topping
1 plate
• Quick Start Guide
Build-a-Waffle Learning Set™

4
Pull out the packaging locks and
discard.
Rotate the packaging locks 90
degrees anticlockwise.
Unlock the Packaging Locks
WARNING
All packing materials such as tape, plastic sheets, packaging
locks, removable tags, cable ties, cords and packaging screws
are not part of this toy and should be discarded for your child’s
safety.
NOTE
Please save this Instruction Manual as it contains important
information.
NOTE
Do not place any object into the waffle maker other than the
waffle pieces provided with the Build-a-Waffle Learning Set™.
NOTE
If the unit powers down or if the light fades out during play,
please install a new set of batteries.

5
GETTING STARTED
BATTERY REMOVAL AND INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back of the unit. Use a
screwdriver to loosen the screw and then open the battery
cover.
3. If used batteries are present, remove these batteries from
the unit by pulling up on one end of each battery.
4. Install 2 new AAA (AM-4/LR03) batteries following the
diagram inside the battery box. (For best performance,
alkaline batteries or fully charged Ni-MH rechargeable
batteries are recommended).
5. Replace the battery cover and tighten the screw to secure.
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.

6
IMPORTANT: BATTERY INFORMATION
• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable
batteries.
• Only batteries of the same or equivalent type as
recommended are to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in
fire.
RECHARGEABLE BATTERIES:
• Remove rechargeable batteries from the toy before
charging.
• Rechargeable batteries are only to be charged under adult
supervision.
• Do not charge non-rechargeable batteries.
Disposal of batteries and product
The crossed-out wheelie bin symbols on products and
batteries, or on their respective packaging, indicates
they must not be disposed of in domestic waste as
they contain substances that can be damaging to the
environment and human health.
The chemical symbols Hg, Cd or Pb, where marked,
indicate that the battery contains more than the
specified value of mercury (Hg), cadmium (Cd) or
lead (Pb) set out in the Batteries and Accumulators
Regulation.
The solid bar indicates that the product was placed
on the market after 13th August, 2005.
Help protect the environment by disposing of your
product or batteries responsibly.

LeapFrog®cares for the planet.
Care for the environment and give your toy a second life by
disposing of it at a small electricals collection point so all its
materials can be recycled.
In the UK:
Visit www.recyclenow.com to see a list of collection points
near you.
In Australia & New Zealand:
Check with your local council for kerbside collections.
PRODUCT FEATURES
1. Off/Low/High Volume Switch
To turn the unit On, slide the Off/Low/
High Volume Switch to the Low or High
position. To turn the unit Off, slide the
Off/Low/High Volume Switch to the Off
position.
2. Cooking Dial
Turn the Cooking Dial to select a cooking
time with the number 1 as the shortest
time and the number 5 as the longest.
When prompted, turn the Cooking Dial
to one of the five colours to choose
a waffle texture from ooey-gooey to
crispy-crunchy.
7

3. Light Up Cooking Button
After setting the Cooking Dial, press
the Cooking Button to start cooking the
waffles. The button will light up and flash
when the waffles are ready.
4. Music Button
Press to hear four songs about cooking
waffles and adding toppings, numbers
one to five and colours.
5. Numbers and Colours Activities Button
Press the Numbers and Colours Activities
Button for a guided play activity about
numbers or colours. Follow the prompts
to turn the Cooking Dial, count along
as you add each waffle piece to the
waffle maker (which activates the Waffle
Sensor) and serve up waffles with added
toppings.
8

6. Games and Activities Button
Press the Games and Activities Button
for activities which encourage creative
play in building your own waffle recipes.
Occasionally, timed stacking challenges
will play.
7. Automatic Shut-Off
To preserve battery life, the Build-a-Waffle Learning Set™
will automatically shut off after approximately 65 seconds
without input. The unit can be turned on again by pressing
any button, opening or closing the lid, or turning the dial.
9

10
SONG LYRICS
Song 1
Waffles and toppings,
So many delicious ways to eat.
When you’re building a waffle treat!
Song 2
1, 2, 3, 4, 5,
Making waffles is so much fun.
They’re gonna be so yummy.
Hooray, hooray, the waffles are done!
Song 3
Purple, blue, red, orange, green,
Making waffles is so much fun.
They’re gonna be so yummy.
Hooray, hooray, the waffles are done!
Song 4
We’re cooking waffles,
They’ll be great.
Everything tastes so much better,
When we share our waffles together.

11
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat sources.
3. Remove the batteries if the unit will not be in use for an
extended period of time.
4. Do not drop the unit on hard surfaces and do not expose
the unit to moisture or water.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions,
please follow these steps:
1. Turn the unit Off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit On. The unit should now be ready to use
again.
5. If the unit still does not work, install a new set of batteries.
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency
interference. It should revert to normal operation when the
interference stops. If not, it may become necessary to turn the
power off and back on, or remove and reinstall the batteries.
In the unlikely event of an electrostatic discharge, the unit may
malfunction and lose memory, requiring the user to reset the
device by removing and reinstalling the batteries.

12
CONSUMER SERVICES
Creating and developing LeapFrog®products is
accompanied by a responsibility that we at LeapFrog®take
very seriously. We make every effort to ensure the accuracy
of the information, which forms the value of our products.
However, errors sometimes can occur. It is important for you
to know that we stand behind our products and encourage
you to call our Consumer Services Department with any
problems and/or suggestions that you might have. A service
representative will be happy to help you.
UK Customers:
Phone: [phone] (from UK) or [phone] (outside UK)
Website: www.leapfrog.co.uk/support
Australian Customers:
Phone: [phone]
Website: support.leapfrog.com.au
NZ Customers:
Phone: [phone]
Website: support.leapfrog.com.au
PRODUCT WARRANTY/
CONSUMER GUARANTEES
UK Customers:
Read our complete warranty policy online at leapfrog.com/warranty.
Australian Customers:
VTECH ELECTRONICS (AUSTRALIA) PTY LIMITED –
CONSUMER GUARANTEES
Under the Australian Consumer Law, a number of consumer
guarantees apply to goods and services supplied by VTech
Electronics (Australia) Pty Limited. Please refer to
leapfrog.com/en-au/legal/warranty for further information.

LeapFrog Enterprises, Inc.,
A subsidiary of VTech Holdings Limited.
TM & © 2022 LeapFrog Enterprises, Inc.
All rights reserved.
Printed in China
Visit our website for more
information about our products,
downloads, resources and more.
leapfrog.com
IM-616700-000
Version:0