LeapFrog Touch & Learn Wooden Activity Cube User manual

Instruction Manual
This manual contains important information. Please save it for future reference.
Touch & LearnTouch & Learn
WoodenWooden
Activity CubeActivity Cube
Touch & LearnTouch & Learn
WoodenWooden
Activity CubeActivity Cube
Touch & LearnTouch & Learn
WoodenWooden
Activity CubeActivity Cube
Touch & Learn
Wooden
Activity Cube™

2
INTRODUCTION
Thank you for purchasing the Touch & Learn Wooden Activity
Cube™! Take a trip around the block exploring ve fun sides
full of activities. Discover shapes, colors, numbers and animals.
Explore ve musical styles and play with different instrument
sounds.
Shape Pieces
Number Blocks
Shape Sorter
Spinning Beads
Piano Keys
Gears
Mode Switch
Animal
Buttons
Phone Button
Phone
Off/Low/High
Volume Selector
Sliding Squirrel
and Buttery

3
INCLUDED IN THIS PACKAGE
•Touch & Learn Wooden Activity CubeTM
•Quick Start Guide
WARNING
All packing materials such as tape, plastic sheets, packaging
locks, removable tags, cable ties, cords and packaging screws
are not part of this toy, and should be discarded for your child’s
safety.
NOTE
Please save this Instruction Manual as it contains important
information.
ATTENTION
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches, étiquettes, cordons et vis d’emballage. Ils
ne font pas partie du jouet.
NOTE
Il est conseillé de sauvegarder ce manuel d’utilisation car il
comporte des informations importantes.
Unlock the Packaging Locks
Rotate the packaging lock 90
degrees counterclockwise.
Pull out the packaging lock
and discard.

4
GETTING STARTED
BATTERY REMOVAL AND INSTALLATION
1. Make sure the unit is turned Off.
2. Find the battery cover located on the back of the unit, use
a coin or screwdriver to loosen the screw and then open
the battery cover.
3. Remove old batteries by pulling up on one end of each
battery.
4. Install 2 new AA (AM-3/LR6) batteries following the diagram
inside the battery box. (For best performance, alkaline
batteries or fully charged Ni-MH rechargeable batteries are
recommended.)
5. Replace the battery cover and tighten the screw to secure.
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.
ATTENTION:
Les piles ou accumulateurs doivent être installés par un adulte.
Tenir les piles ou accumulateurs hors de portée des enfants.

5
IMPORTANT: BATTERY INFORMATION
• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable
batteries.
• Only batteries of the same or equivalent type as
recommended are to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in
re.
RECHARGEABLE BATTERIES
• Remove rechargeable batteries (if removable) from the toy
before charging.
• Rechargeable batteries are only to be charged under adult
supervision.
• Do not charge non-rechargeable batteries.
NOTE
If the unit powers down or if the light fades out during play,
please install a new set of batteries.

6
PRODUCT FEATURES
1. Off/Low/High/Volume Selector
To turn the unit On, slide the Off/Low/Off/Low/
High Volume SelectorHigh Volume Selector to the Low or High
position. To turn the unit Off, slide the
Off/Low/High Volume SelectorOff/Low/High Volume Selector to the
Off position.
2. Mode Switch
Slide the Mode SwitchMode Switch and press the
Piano KeysPiano Keys and Animal ButtonsAnimal Buttons to
explore colors, shapes and musical
instruments.
3. Spinning Beads
Spin the cloud and slide the beads
around the sky. Press down on the
maze to hear learning phrases about the
weather.
4. Spinning Gears
Spin the three colorful, interlocking
GearsGears.
5.SlidingSquirrelandButtery
Slide the SquirrelSquirrel and ButteryButtery along
their paths.

7
6. Spinning Number Blocks
Flip the nine Number BlocksNumber Blocks to explore
numbers and quantities of nature-
themed items.
7. Shapes and Shape Sorter
Fit the four Shape PiecesShape Pieces through the
holes to explore shapes and build motor
skills.
8.PianoKeys
Press the ve Piano KeysPiano Keys to hear ve
different notes in a scale. Press the
musical Animal ButtonsAnimal Buttons in Music mode
to choose different instruments for the
Piano KeysPiano Keys to play.
9. Musical Animal Buttons
Press the ve colorful Animal ButtonsAnimal Buttons to
hear ve different animal names, musical
instruments and music styles.

8
10. Portable Phone
Take the PortablePortable PhonePhone on the go.
11. Phone Button
Press the Phone ButtonPhone Button to hear learning
questions and to chat with Dog.

9
ACTIVITIES
1. Explore Mode
Slide the Mode SwitchMode Switch to Explore mode ( ). Press the
Animal ButtonsAnimal Buttons to hear phrases about colors and animal
names. Press the Piano KeysPiano Keys to hear songs about color
names. Press the Phone ButtonPhone Button to hear Dog ask search-
and-find questions about items on the cube.
2. Learn Mode
Slide the Mode SwitchMode Switch to Learn mode ( ). Press the
Animal ButtonsAnimal Buttons to hear phrases about musical instruments
and styles of music. Press the Piano KeysPiano Keys to hear shape
names. Press the Phone ButtonPhone Button to hear Dog ask search-and-
find questions about numbered sets of items on the cube.
2. Music Mode
Slide the Mode SwitchMode Switch to Music mode ( ). Press the
Animal ButtonsAnimal Buttons to hear musical phrases featuring five
instruments. Press the Piano KeyPiano Keys to hear five musical
notes. The Piano KeysPiano Keys will play the instrument pictured on
the Animal ButtonAnimal Button that was most recently pressed. Choose
from violin, drum, flute, guitar or trumpet. Press the PhonePhone
ButtonButton to hear fun greetings from Dog.

10
SongLyrics
Song 1
Let’s play outside,
What do you see?
A ower, a fox and a bumble bee!
Come along and play with me!

11
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any
direct heat sources.
3. Remove the batteries if the unit will not be in use for an
extended period of time.
4. Do not drop the unit on hard surfaces and do not expose
the unit to moisture or water.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions,
please follow these steps:
1. Please turn the unit Off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the
batteries.
4. Turn the unit On. The unit should now be ready to use again.
5. If the unit is still not working properly, install a brand new
set of batteries.

12
IMPORTANT NOTE:IMPORTANT NOTE:
If the problem persists, please call our Consumer ServicesConsumer Services
DepartmentDepartment at 1-800-701-53271-800-701-5327 in the U.S. and Canada, or email
[e-mail]. Creating and developing LeapFrog
products is accompanied by a responsibility that we take very
seriously. We make every effort to ensure the accuracy of the
information, which forms the value of our products. However,
errors sometimes can occur. It is important for you to know that
we stand behind our products and encourage you to contact
us with any problems and/or suggestions you might have. A
service representative will be happy to help you.
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency
interference. It should revert to normal operation when the
interference stops. If not, it may become necessary to turn the
power off and back on, or remove and reinstall the batteries.
In the unlikely event of an electrostatic discharge, the unit may
malfunction and lose memory, requiring the user to reset the
device by removing and reinstalling the batteries.
Impact de l’environnement
Une défaillance de fonctionnement de l’appareil peut
survenir s’il est sujet à des interférences avec les fréquences
radioélectriques. Le fonctionnement normal de l’appareil devrait
reprendre avec l’arrêt des interférences. Si ce n’est pas le cas, il
peut s’avérer nécessaire d’éteindre et rallumer l’appareil ou de
retirer et réinstaller les piles. Dans l’éventualité peu probable
d’une décharge électrostatique, un mauvais fonctionnement
et une perte de mémoire de l’appareil peuvent se produire.
L’utilisateur doit alors retirer et réinstaller les piles pour
réinitialiser l’appareil.

13
CAUTION
Changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
NOTE
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.

14
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION
IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS
DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS
DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Trade Name: LeapFrog®
Model: 6171
Product Name: Touch & Learn Wooden Activity Cube™
Responsible Party: LeapFrog Enterprises, Inc.
Address: 2200 Powell St., Suite 500
Emeryville, CA 94608
Website: leapfrog.com

15
This device contains licence-exempt transmitter(s)/receiver(s)
that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is
subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le
présent appareil est conforme aux CNR d’Innovation, Sciences
et Développement économique Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée
aux deux conditions suivantes :
(1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en compromettre
le fonctionnement.

LeapFrog Enterprises, Inc.
A subsidiary of VTech Holdings Limited.
TM & © 2023 LeapFrog Enterprises, Inc.
All rights reserved.
IM-617100-000
Version:0
Visit our website for more
information about our products,
downloads, resources and more.
leapfrog.com
leapfrog.ca
Read our complete warranty policy online at
leapfrog.com/warranty
leapfrog.ca/warranty