LeapFrog Go-with-Me ABC Backpack Assembly Instructions

Parent’s Guide
This guide contains important information. Please keep it for future reference.
91-003510-005 US
TM
Go-with-Me ABC Backpack
Go-with-Me ABC BackpackGo-with-Me ABC BackpackGo-with-Me ABC Backpack

2
Letter
Pieces
Writing
Board
Stylus
Eraser
LCD
Screen
Strap
On/Off/Volume
Control Switch
INTRODUCTION
Thank you for purchasing the Go-with-Me ABC BackpackTM!
Pack your bag and get ready to have a blast learning letters,
writing and drawing with Mr. Pencil.
Puzzle
Spots
Activity
Buttons

3
INCLUDED IN THIS PACKAGE
• One Go-with-Me ABC BackpackTM
• 26 letter pieces
• Two backpack straps
• One parent’s guide
WARNING:
All packing materials, such as tape, plastic sheets, packaging
locks, removable tags, cable ties and packaging screws are not
part of this toy, and should be discarded for your child’s safety.
NOTE:
Please keep this parent’s guide as it contains important
information.
ATTENTION :
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches, étiquettes et vis d’emballage. Ils ne font
pas partie du jouet.
NOTE :
Il est conseillé de conserver ce guide des parents car il comporte
des informations importantes.
Unlock the packaging locks:
Rotate the packaging locks 90
degrees counterclockwise.
Pull out the packaging locks and
discard.

4
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the
bottom of the unit.
3. Use a screwdriver or a coin to loosen
the screw and open the battery cover.
4. Install 2 new AA (AM-3/LR6) batteries
into the battery box as illustrated.
(The use of new alkaline batteries
is recommended for maximum
performance.)
5. Replace the battery cover and tighten
the screw to secure.
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as
recommended.
• Do not mix different types of batteries: alkaline, standard
(carbon-zinc) or rechargeable, or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging
(if removable).
• Rechargeable batteries are only to be charged under adult
supervision.

5
MISE EN GARDE
Les piles fournies avec le produit permettent de tester le jouet
en magasin mais ne sont pas des piles longue durée.
• Seules des piles du type recommandé doivent être utilisées.
• Ne pas mélanger différents types de piles ou d’accumulateurs,
ne pas mélanger des piles ou des accumulateurs neufs avec
des usagés.
• Ne pas utiliser des piles ou des accumulateurs endommagés.
• Mettre en place les piles ou les accumulateurs en respectant
les polarités + et –.
• Ne pas mettre les bornes d’une pile ou d’un accumulateur
en court-circuit (en reliant directement le + et le –).
• Enlever les piles ou les accumulateurs usagés du jouet.
• Retirer les piles ou les accumulateurs en cas de non-
utilisation prolongée.
• Ne les jeter ni au feu ni dans la nature.
• Ne pas tenter de recharger des piles non rechargeables.
• Enlever les accumulateurs du jouet pour les recharger.
• Les accumulateurs ne doivent être chargés que sous la
surveillance d’un adulte.

6
ASSEMBLY INSTRUCTIONS
The Go-with-Me ABC BackpackTM comes with backpack straps
that can be attached or removed at any time. Follow the steps
below to attach these straps:
NOTE: Adult operation needed.
1. Insert one end of the strap through the slot on the top and
the other end through the slot on the bottom.
Top
Bottom
2. Loop the strap through the buckle. Secure both ends of the
strap as shown. Repeat for the second strap.
Top
Bottom

7
PRODUCT FEATURES
1. On/Off/Volume Control Switch
Slide the On/Off/Volume Control Switch to turn the toy on
and select the volume.
2. LCD screen
The LCD Screen displays letters, letter
stroke order and fun animations.
3. Activity Buttons
Press the Activity Buttons to select an
activity.
4. Letters & Puzzle Spots
Press the Letter Pieces into their Puzzle
Spots to trigger fun audio.
5. Stylus, Writing Board & Eraser
Use the Stylus to draw on the Writing
Board. Slide the Eraser up and down to
clear the board.
NOTE: For best results, write slowly on the Writing Board using
the Stylus. Clean the writing by sliding the Eraser slowly
several times.

8
6. Backpack Straps
Attach the Straps to carry just like a
backpack.
7. Low Battery Indicator
When the batteries run low, this icon
will appear on the screen, flash twice and
the unit will power off. Remove the old
batteries and replace with a new set.
ACTIVITIES
1. Letter Zoo
Press a Letter Piece into its Puzzle Spot to hear the letter
name, letter sound and an animal that begins with that letter.
2. Meet the Letters
Listen to the letter names, then try to find them in this silly
game.
3. Mystery Word
Listen to the letter sounds, then try to find the correct letters.
Fill in the blanks to sound out the mystery word.
4. Uppercase Letters
Follow the animations to learn how to write uppercase letters
using the Stylus and Writing Board.

9
5. Lowercase Letters
Follow the animations to learn how to write lowercase letters
using the Stylus and Writing Board.
6. Letter Animals
Follow the animations to learn how to turn letters into
animals using the Stylus and Writing Board.
7. Music
Press a Letter Piece into its Puzzle Spot to hear the Letter
Parade song.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat sources.
3. Remove the batteries when the unit is not in use for an
extended period of time.
4. Do not drop the unit on a hard surface and do not expose
the unit to excess moisture.

10
TROUBLESHOOTING
If for some reason the program/activity stops working, please
follow these steps:
1. Turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the
batteries.
4. Turn the unit back ON. The unit will now be ready to play
again.
5. If the unit still does not work, replace with an entire set of
new batteries.
IMPORTANT NOTE:
If the problem persists, please call our Consumer
Services Department at 1-800-701-5327 in the U.S. or
email [e-mail]. Creating and developing
LeapFrog® products is accompanied by a responsibility
that we take very seriously. We make every effort to ensure
the accuracy of the information, which forms the value
of our products. However, errors sometimes can occur.
It is important for you to know that we stand behind
our products and encourage you to contact us with any
problems and/or suggestions you might have. A service
representative will be happy to help you.

11
Environmental phenomena.
The unit may malfunction if subjected to radio-frequency
interference. It should revert to normal operation when the
interference stops. If not, it may become necessary to turn the
power OFF and back ON, or remove and reinstall the batteries.
In the unlikely event of an electrostatic discharge, the unit may
malfunction and lose memory, requiring the user to reset the
device by removing and reinstalling the batteries.
Impact de l’environnement.
Une défaillance de fonctionnement de l’appareil peut
survenir s’il est sujet à des interférences avec les fréquences
radioélectriques. Le fonctionnement normal de l’appareil devrait
reprendre avec l’arrêt des interférences. Si ce n’est pas le cas, il
peut s’avérer nécessaire d’éteindre et rallumer l’appareil ou de
retirer et réinstaller les piles. Dans l’éventualité peu probable
d’une décharge électrostatique, un mauvais fonctionnement
et une perte de mémoire de l’appareil peuvent se produire.
L’utilisateur doit alors retirer et réinstaller les piles pour
réinitialiser l’appareil.
Supplier’s Declaration of Conformity
Trade Name: Leapfrog®
Responsible Party: LeapFrog Enterprises, Inc.
Website: www.leapfrog.com
Address: 6401 Hollis Street, Suite 100,
Emeryville, CA 94608
Model: 6034

12
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Caution: Changes or modifications not expressly approved
by the party responsible for compliance could void the user’s
authority to operate the equipment.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.
CAN ICES-3 (B)/NMB-3(B)

Visit our website for more
information about our products,
downloads, resources and more.
leapfrog.com
Read our complete warranty policy online
at leapfrog.com/warranty.
LeapFrog Enterprises, Inc.,
a subsidiary of VTech Holdings Limited.
TM & © 2018 LeapFrog Enterprises, Inc.
All rights reserved.
91-003510-005US