LeapFrog 2-in-1 LeapTop Touch Assembly Instructions

Parent’s Guide
This guide contains important information. Please keep it for future reference.
91-003838-004 UK
™
2-in- Touch & Learn Tablet
Touch & Learn Tablet2-in-

2
INTRODUCTION
Thank you for purchasing the 2-in-1 Touch & Learn Tablet™!
Enjoy a new kind of learning with the pretend tablet that has
activities on one side and stories on the other. Twist and flip
the tablet to change modes and explore 14+ touch-and-learn
areas on each page!
Off/Low/High
Volume Selector
Activity Pages
Control
Handle
Lock Button
LED Button
Story Pages

3
INCLUDED IN THIS PACKAGE
• 2-in-1 Touch & Learn Tablet™
• Parent’s guide
WARNING
All packing materials such as tape, plastic sheets, packaging
locks, removable tags, cable ties and packaging screws are not
part of this toy, and should be discarded for your child’s safety.
NOTE
Please keep this parent’s guide as it contains important
information.
Unlock the Packaging Locks:
Rotate the packaging locks 90
degrees anticlockwise.
Pull out the packaging locks
and discard.

4
GETTING STARTED
BATTERY REMOVAL AND INSTALLATION
1. Make sure the unit is turned Off.
2. Locate the battery cover on the back of the unit. Use a
screwdriver or coin to loosen the screw and open the battery
cover.
3. If used batteries are present, remove these batteries from
the unit by pulling up on one end of each battery.
4. Install 2 new ‘AA’ (AM-3/LR6) batteries following the
diagram inside the battery box. (For best performance,
alkaline batteries or fully charged Ni-MH rechargeable
batteries are recommended).
5. Replace the battery cover and tighten the screw to secure.
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.

5
IMPORTANT: BATTERY INFORMATION
• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable
batteries.
• Only batteries of the same or equivalent type as
recommended are to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in fire.
RECHARGEABLE BATTERIES:
• Remove rechargeable batteries from the toy before
charging.
• Rechargeable batteries are only to be charged under adult
supervision.
• Do not charge non-rechargeable batteries.
Disposal of batteries and product
The crossed-out wheelie bin symbols on products and
batteries, or on their respective packaging, indicates
they must not be disposed of in domestic waste as
they contain substances that can be damaging to the
environment and human health.
The chemical symbols Hg, Cd or Pb, where marked,
indicate that the battery contains more than the specified
value of mercury (Hg), cadmium (Cd) or lead (Pb) set out
in the Batteries and Accumulators Regulation.
The solid bar indicates that the product was placed on the
market after 13th August, 2005.
Help protect the environment by disposing of your
product or batteries responsibly.
VTech®cares for the planet.
Care for the environment and give your toy a second life by
disposing of it at a small electricals collection point so all its
materials can be recycled.

6
In the UK:
Visit www.recyclenow.com to see a list of collection points near you.
In Australia & New Zealand:
Check with you local council for kerbside collections.
NOTE
If the unit powers down or if the light fades out during play, please
install a new set of batteries.
PRODUCT FEATURES
1. Off/Low/High Volume Selector
Slide the Off/Low/High Volume Selector
to turn the toy on and select the volume.
2. Control Handle
To switch between the Activity and Story Pages, press the
Lock Button and twist the Control Handle.
• Activity to Story Pages: Press and hold
the Lock Button, then twist the Control
Handle in the direction of the arrow.
• Story to Activity Pages: Press and hold
the Lock Button, then twist the Control
Handle in the direction of the arrow.
The LED Button should always face the player.

7
3. Activity Pages
Tap anywhere on the page to play and learn.
• Tap on the single star image to enter the
Find-It game, where the player is asked
to find objects on the Activity Pages.
Each tap of the single star triggers three
questions.
• Tap on the double star image to enter
the Advanced Find-It game, where
the player is asked to find different
objects on the Activity Pages or more
challenging questions. Each tap of the
double star triggers three questions.
4. Story Pages
Tap anywhere on the page to interact with the story.
• Tap on the single star to enter the Find-It
game, where the player is asked to find
objects on the Story Pages. Each tap of
the single star triggers three questions.
• Tap on the book image to hear the entire
story.

8
5. LED Button
Press to play a unique tune for every set of Activity and Story
Pages.
• Tune 1: Emotions - Cooper
• Tune 2: Counting - Buddy
• Tune 3: Flowers - Bella
• Tune 4: Shapes - Jake
• Tune 5: Animals - Pepper
• Tune 6: Opposites - Mona
The LED Button feature is not active while playing the Find-It game.
6. Automatic Shut-Off
To preserve battery life, the 2-in-1 Touch & Learn Tablet™ will
automatically go into sleep mode after approximately 45 seconds
without input. To turn the unit on again, turn a page, press the LED
button or use the Control Handle to change modes.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat sources.
3. Remove the batteries if the unit will not be in use for an
extended period of time.
4. Do not drop the unit on a hard surface and do not expose
the unit to moisture or water.

9
TROUBLESHOOTING
If for some reason the program/activity stops working, please
follow these steps:
1. Turn the unit Off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace
the batteries.
4. Turn the unit back On. The unit should now be ready to
use again.
5. If the unit still does not work, install a new set of batteries.
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency
interference. It should revert to normal operation when the
interference stops. If not, it may become necessary to turn the
power OFF and back ON, or remove and reinstall the batteries.
In the unlikely event of an electrostatic discharge, the unit may
malfunction and lose memory, requiring the user to reset the
device by removing and reinstalling the batteries.

10
CONSUMER SERVICES
Creating and developing LeapFrog®products is accompanied
by a responsibility that we at LeapFrog®take very seriously.
We make every effort to ensure the accuracy of the
information, which forms the value of our products. However,
errors sometimes can occur. It is important for you to know
that we stand behind our products and encourage you to call
our Consumer Services Department with any problems and/
or suggestions that you might have. A service representative
will be happy to help you.
UK Customers:
Phone: [phone] (from UK) or [phone] (outside UK)
Website: www.leapfrog.co.uk/support
Australian Customers:
Phone: [phone]
Website: support.leapfrog.com.au
NZ Customers:
Phone: [phone]
Website: support.leapfrog.com.au
PRODUCT WARRANTY/
CONSUMER GUARANTEES
UK Customers:
Read our complete warranty policy online at leapfrog.com/warranty.
Australian Customers:
VTECH ELECTRONICS (AUSTRALIA) PTY LIMITED –
CONSUMER GUARANTEES
Under the Australian Consumer Law, a number of consumer
guarantees apply to goods and services supplied by VTech
Electronics (Australia) Pty Limited. Please refer to
leapfrog.com/en-au/legal/warranty for further information.