LeapFrog Musical Rainbow Tea Party Assembly Instructions

Parent’s Guide
This guide contains important information. Please keep it for future reference.
91-003504-000 US

Strawberry Cake
Apple Cake
Peach Cake
Two Tea
Cups
Light-Up Tea
Heart Button Mode
Switch
Blueberry Cake
Lemon Cake
Interactive Lid
Off/Low/High
Volume Switch
2
INTRODUCTION
Thank you for purchasing the Musical Rainbow Tea Party™!
Share some tea with friends (or a favorite teddy bear!) and
learn about shapes, colors, counting and manners.

3
INCLUDED IN THIS PACKAGE
One light-up
teapot
One top plate
Two tea cups
• One parent’s guide
One apple cake
piece
One cake stand
One center post
One peach cake
piece
One strawberry
cake piece
One handle
One cake stand
base
One lemon cake
piece
One blueberry
cake piece

4
WARNING:
All packing materials such as tape, plastic sheets, packaging
locks, removable tags, cable ties and packaging screws are not
part of this toy, and should be discarded for your child’s safety.
NOTE:
Please keep this parent’s guide as it contains important
information.
ATTENTION :
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches, étiquettes et vis d’emballage. Ils ne font
pas partie du jouet.
NOTE :
Il est conseillé de conserver ce guide des parents car il comporte
des informations importantes.
Unlock the packaging locks:
Rotate the packaging locks 90 degrees
counterclockwise.
Pull out the packaging locks and discard.

5
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of the unit.
3. Use a coin or a screwdriver to loosen the screw and open
the battery cover.
4. Install 2 new AA (AM-3/LR6) batteries into the battery
box as illustrated. (The use of new alkaline batteries is
recommended for maximum performance.)
5. Replace the battery cover and tighten the screw to secure.

6
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as
recommended.
• Do not mix different types of batteries: alkaline, standard
(carbon-zinc) or rechargeable, or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging
(if removable).
• Rechargeable batteries are only to be charged under adult
supervision.
MISE EN GARDE
• Utiliser des piles alcalines neuves pour des performances
maximales.
• Seules des piles du type recommandé doivent être utilisées.
• Ne pas mélanger différents types de piles ou d’accumulateurs,
ne pas mélanger des piles ou des accumulateurs neufs avec
des usagés.
• Ne pas utiliser des piles ou des accumulateurs endommagés.
• Mettre en place les piles ou les accumulateurs en respectant
les polarités + et –.
• Ne pas mettre les bornes d’une pile ou d’un accumulateur
en court-circuit (en reliant directement le + et le –).
• Enlever les piles ou les accumulateurs usagés du jouet.
• Retirer les piles ou les accumulateurs en cas de non-
utilisation prolongée.
• Ne les jeter ni au feu ni dans la nature.
• Ne pas tenter de recharger des piles non rechargeables.
• Enlever les accumulateurs du jouet pour les recharger.
• Les accumulateurs ne doivent être chargés que sous la
surveillance d’un adulte.

7
ASSEMBLY
With the Leapfrog®Musical Rainbow Tea Party™, safety
comes first. To ensure your child’s safety, adult assembly is
required.
1. Attach the Top Plate onto the Center Post.
2. Insert the Handle into the Top Plate.
PRODUCT FEATURES
1. Off/Low/High Volume Switch
To turn the unit ON, slide the Off/Low/
High Volume Switch to the Low Volume
( ) or the High Volume ( ) position.
To turn the unit OFF, slide the Off/Low/
High Volume Switch to the OFF ( )
position.

8
2. Mode Switch
Slide the Mode Switch to choose Music
or Time for Tea mode.
3. Automatic Shut Off
To save power, the light-up teapot
automatically shuts down after 50
seconds without input. Press the Heart
Button to turn the unit on again.
4. Heart Button
Press the Heart Button to hear a variety
of fun responses.
5. Light-Up Tea
Tilt the teapot to see the “tea” move and
hear fun pouring sounds.
6. Interactive Lid
Open and close the Interactive Lid to
change tea flavors and colors.

9
ACTIVITIES
Music
Open the Interactive Lid, tilt the teapot or press the Heart
Button to hear cute learning songs and sound effects.
Time for Tea
Press the Heart Button to practice counting and to receive fun,
pretend-play questions.
CARE & MAINTENANCE
1. Keep the toy and accessories clean by wiping them with a
slightly damp cloth.
2. Keep it out of direct sunlight and away from direct sources
of heat.
3. Remove the batteries when the unit is not in use for an
extended period of time.
4. Do not drop the unit on a hard surface and do not expose
the unit to excess moisture.
TROUBLESHOOTING
If for some reason the program/activity stops working, please
follow these steps:
1. Turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the
batteries.
4. Turn the unit back ON. The unit will now be ready to play again.
5. If the unit still does not work, replace with an entire set of
new batteries.

10
Environmental phenomena.
The unit may malfunction if subjected to radio-frequency
interference. It should revert to normal operation when the
interference stops. If not, it may become necessary to turn the
power OFF and back ON, or remove and reinstall the batteries.
In the unlikely event of an electrostatic discharge, the unit may
malfunction and lose memory, requiring the user to reset the
device by removing and reinstalling the batteries.
Impact de l’environnement.
Une défaillance de fonctionnement de l’appareil peut
survenir s’il est sujet à des interférences avec les fréquences
radioélectriques. Le fonctionnement normal de l’appareil devrait
reprendre avec l’arrêt des interférences. Si ce n’est pas le cas, il
peut s’avérer nécessaire d’éteindre et rallumer l’appareil ou de
retirer et réinstaller les piles. Dans l’éventualité peu probable
d’une décharge électrostatique, un mauvais fonctionnement
et une perte de mémoire de l’appareil peuvent se produire.
L’utilisateur doit alors retirer et réinstaller les piles pour
réinitialiser l’appareil.

11
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
IMPORTANT NOTE:
If the problem persists, please call our Consumer Services
Department at 1-800-701-5327 in the U.S. or email
[e-mail]. Creating and developing LeapFrog®
products is accompanied by a responsibility that we take
very seriously. We make every effort to ensure the accuracy
of the information, which forms the value of our products.
However, errors sometimes can occur. It is important for you
to know that we stand behind our products and encourage
you to contact us with any problems and/or suggestions
you might have. A service representative will be happy to
help you.

12
Caution: Changes or modifications not expressly approved
by the party responsible for compliance could void the user’s
authority to operate the equipment.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
CAN ICES-3 (B)/NMB-3(B)

Read our complete warranty policy
online at
leapfrog.com/warranty.
LeapFrog Enterprises, Inc.,
a subsidiary of VTech Holdings Limited.
TM & © 2018 LeapFrog Enterprises, Inc.
All rights reserved.

Visit our website for more
information about our products,
downloads, resources and more.
leapfrog.com
91-003504-000 US