Leckey Kidwalk User manual

How to adjust…… Leckey Kidwalk
walker
*adjustments can be made when child is in the Kidwalk unless
stated otherwise.
To adjust the height
of chest support
unscrew the screw
and move chest
support to required
height, tighten
screw to secure in
place.
(A) (B)
To adjust the width
of the chest lateral
unscrew the screws
(A) on the back of
the lateral, tighten
once in place.
Screw (B) adjusts
the depth of the
front lateral pad,
this unit needs to
be snug to the
child.
To adjust the
height of the head
support use the
height adjust
screw. You can
bring the headrest
forwards of
backwards using
the depth
adjustment screw.
To adjust the hip support width
turn the width adjustment knob,
the depth can be adjusted using
the small screws on the side of
the lateral pad it needs to be
snug on Childs hips.

How to adjust…… Leckey Kidwalk
walker
*adjustments can be made when child is in the Kidwalk unless
stated otherwise.
To Raise the
overall height of
the Kidwalk
squeeze the two
lower handles
together in a
pumping action
the frame will
move up
gradually.
To adjust the angle of the Kid walk so
the child can be either upright or at a
forward leaning position, turn the dial
to the required position. Make sure
the child is secured into the Kidwalk
first.
To lower the walker
press the black
lever forward and
push down on the
top handle of the
two in one motion.
*This action should
not be done when
the user is in the
Kidwalk.
To activate the
breaks push the
two levers located
at the back of the
wheels.