Legacy Classic Furniture 3600-622 TRESTLE TABLE User manual

ASSEMBLY INSTRUCTIONS:
3600-622 TRESTLE TABLE
Parts & Hardware L st:
Thank you for purchas ng th s qual ty product. Before beg nn ng, please check the pack ng mater al
carefully for small parts wh ch may have come loose ns de the carton dur ng sh pp ng. Please do not
d scard any pack ng mater al unt l all parts have been located. If any parts are m ss ng, please contact
your dealer for prompt replacement.
8 PCS
3
5/16"*1-1/2"
2
HARDWARE LIST
SHORT BOLT
1
Q'TY
10 PCS
MEDIUM BOLT
LONG BOLT
5/16"*1-3/4"
5/16"*3-3/4"
5
WOOD DOWEL
5/16"
5/16"*23*2mm
FLAT WASHER
8 2 PCS
10*40MM
SPRING WASHER
4 20 PCS
20 PCS
HARDWARE LIST Q'TY
PARTS LIST Q'TY
TABLE TOP
B
A
1 PC 2 PCS
E
TABLE LEG
F
2 PCS
PARTS LIST Q'TY
C
TABLE LEAF 1 PC
G
SHORT STRETCHER
LONG STRETCHER 1 PC
2 PCS
SHORT WRENCH
6 1 PC
70*30*4mm
LONG WRENCH
7 1 PC
70*30*5mm
Step 2 Step 3 Step 4
Step 5 Step 6
A
B
Adjustable
Leveler
G
E
4
5
3
7
8
E
F
F
6
A
77
2
4
5
4
5
7
2
E
E
C
1
4
5
7
D
BASE MOUNTING
PLATE 1 PC
TOP MOUNTING
PLATE 1 PC
C
D
7
6
1
4
5
7
A
C
D

ASSEMBLY INSTRUCTIONS:
3600-622 TRESTLE TABLE
Assembly Proce ures:
Step 1: Lay out all parts an har ware. Make sure the quantity of each is correct an the feet are free of
stain, staples, screws an nails.
Step 2: Remove the base mounting plate (C) an top mounting plate (D) from the table top (A) which is
fixe on the un er si e of the table top by etaching bolt, spring washer an flat washer with
wrench.
Note : Do not throw away the har ware when you remove the mounting plates (C&D) from the un er
si e of table top.
Step 3: Assemble the short & long stretchers (F&G) to the table legs (E) as shown.
Step 4: Assemble the table legs (E) an short stetchers (F) to the base mounting plate (C) as shown.
Step 5: Place the table top (A) face own on a clean soft flat surface such as a blanket an ensure the
surface is clear of any objects that coul scratch or amage the top.
Assemble the legs with base mounting plate (C) to the top mounting plate (D) an table top (A)
as shown.
Step 6: Turn the table to its upright position. Unlock the lock mechanism un er the table top before
pulling it apart an then carefully insert or remove the table leaf.
Use a justable levelers as necessary.
Note : If han le improperly, the act of installing an removing table leaves may amage the table.
Please use caution an elicate han ling when installing an removing table leaves to prevent
amaging the table top surface an e ges. It is best two persons are involve when installing or
removing table leaves.
Caution: Over-tighting screws or bolts may result in amage. It is suggeste that at least two people
work together for this assembly process to avoi injury. Following assembly, the furniture shoul be
cleane with a quality, non-silicone furniture polish on a clean, soft cloth.
www.legacyclassic.com