LEGRAND bticino 0883 28 3578 User manual

35780883 28
1
4
3
2
Technical sheets - Radio system MY HOME 1
Interface for interaction with the functions of the ZigBee radio system using a Personal
Computer and an OpenWeb Net communication protocol.
The device must be connected to a USB port of the computer and features a radio
transmitter for sending/receiving data to and from ZigBee devices installed in the
electric system.
Description Front view
Legend
1. USB connector
2. Data traffic indicator LED
3. NETWORK key
4. NETWORK LED
Power supply: From USB 2.0 socket
Operating temperature: 5 – 45 °C
Technology: Radio 2.4 GHz standard ZigBee®
Capacity: 150 m free field, 15 m in rooms with concrete walls
Technical data
Side view
Open Web Net/Zigbee Gateway
BT00493-a-UK

35780883 28
TECHNICAL SHEETS
Configuration
Connecting the device to the network
1. In the system identify the actuator device with “ZigBee network coordinator”
function, and press the NETWORK key for 3 seconds.
2. The NETWORK LED (yellow) will come on steady, and after a few instants will start
flashing quickly.
3. Press the NETWORK key on the interface. The NETWORK LED will come on steady
during the network search procedure and then will start flashing slowly.
4. To complete the procedure press the NETWORK KEY of the Coordinator device; the
corresponding NETWORK LED will flash three times while the interface NETWORK LED
will turn off.
Disconnecting the interface from the network
1. Press the NETWORK key on the interface. The NETWORK LED will flash quickly.
2. Press the NETWORK key again for at least 10 seconds. The NETWORK LED will flash
quickly twice and then will turn off. The interface is no longer connected to the ZigBee
network.
3 sec.
10 sec.
BT00493-a-UK