Leica F12 I Floor Stand Manual 6
Safety Instructions
Intended use
ϘRefer to the "Safety Concept" brochure.
Non-intended use
ϘRefer to the "Safety Concept" brochure.
The instruments and accessories described
in this manual have been safety-tested and
checked for possible hazards. The responsible
Leica affiliate must be consulted whenever
the instrument is altered, modified or used in
conjunction with non-Leica components that
are outside of the scope of this manual.
Unauthorized alterations to the instrument or
noncompliant use shall void all rights to any
warranty claims.
Installation location
ϘRefer to the "Safety Concept" brochure.
ϘElectrical components must be placed at
least 10 cm away from the wall and from
flammable substances.
ϘAvoid large temperature fluctuations, direct
sunlight and vibrations. These conditions
can distort measurements and microgra-
phic images.
ϘIn warm and warm-damp climatic zones,
the individual components require special
care in order to prevent the build-up of
fungus.
Requirements to be met by the operator:
ϘRefer to the "Safety Concept" brochure.
Ensure that:
ϘThe Leica F12 I is operated, maintained and
repaired only by authorized and trained
personnel.
ϘAll operators have read, understood and
observe this User Manual, and particularly
the safety regulations.
