
TD330 User Guide
2
Chapter 1 Introduction 5
What’s Included 5
Jig Diagram 6
Units of Measure 7
Bit Specifications 7
Clamping 8
Marking the Boards 8
Chapter 2 Safety 9
Chapter 3 The Leigh eBush 13
Chapter 4 Mounting & Assembly 19
Chapter 5 Through Dovetails with a Handheld Router 31
Clamping Narrow Boards 53
Chapter 6 Through Dovetails on a Router Table 57
Clamping Narrow Boards 78
Chapter 7 Guide Bushing Adaptor Selection 79
Chapter 8 Customer Support 81
Contents
Your New Leigh Through Dovetail Jig, Model TD330
The Leigh Through Dovetail Jig, Model TD330, is a simple, easy to use tool for making
through dovetails on boards up to 13/16" [21mm] thick, and from 1-1/4" [32mm] to
12-7/8" [327mm] wide.
Customer Support
If you have any questions that are not answered in this user guide, please call Leigh Customer
contacts in your country of purchase, see Customer Support at the end of this Guide.
Reminder: If at first you don’t succeed, read the instructions!
Instructional Videos Available at leightools.com
Click on the Support tab and go to the Instructional Videos and User Guide page.