
B975 User Guide
2
Chapter 1 Introduction 5
Jig Parts 5
Bit Specifications 7
Symbols for Board Position 8
Clamping 8
Chapter 2 Safety 9
Chapter 3 The Leigh e10 eBush 11
Chapter 4 Mounting & Assembly 15
Chapter 5 Box Joints with a Handheld Router 25
Chapter 6 Box Joints on Wider Boards 37
Chapter 7 Box Joints on a Router Table 47
Chapter 8 Guide Bushing Adapter Selection 63
Chapter 9 Customer Support 65
Contents
Your New Leigh Box Joint & Beehive Jig, Model B975
The Leigh Box Joint & Beehive Jig, Model B975, is a simple, easy-to-use tool for making
1/2" and 3/4" box joints on boards up to 13/16"[20.6mm] thick, and from 1-1/2"[38mm]
to 17-13/16"[453mm] wide. Not by accident, the full 9-11/16"[246mm] width of the jig
is the standard height of a typical beehive super, used in North America.
Customer Support
If you have any questions that are not answered in this user guide, please call Leigh Customer
contacts in your country of purchase, see Customer Support at the end of this Guide.
Leigh user guides are updated as required. A downloadable pdf of the latest version can be
found on the Support page at leightools.com.
Reminder: If at first you don’t succeed, read the instructions!
Watch the Online Instructional Videos at Leightools.com
Dramatically reduce your learning time!
Click on the Support
tab and go to the Instructional Videos and User Guides page.