LEM Jerky Cannon Parts list manual

THE L EADER IN G A ME PRO C E S SING
The original
jerky cannon


USE & MAINTENANCE
468
1 YEAR
WARRANTY
LEM Products • West Chester, OH 45011 • 1-877-536-7763 • lemproducts.com
LEM Products • West Chester, OH 45011 • PH: 1-877-536-7763 • lemproducts.com
Revised November 20, 2015
IMPORTANT WARRANTY INFORMATION PLEASE READ
FILL OUT AND RETURN ENCLOSED WARRANTY CARD
THIS WARRANTY COVERS
THE ORIGINAL JERKY CANNON #468
THE WARRANTY IS EXTENDED TO THE ORIGINAL PURCHASER ONLY.
WARRANTY DURATION: This product is warranted to the original purchaser for a period of one (1) year from the original purchase
date. EACH UNIT COMES WITH A WARRANTY CARD, WHICH MUST BE FILLED OUT COMPLETELY AND RETURNED IMMEDIATELY,
WITH A COPY OF THE PURCHASING RECEIPT. FAILURE TO RETURN YOUR WARRANTY CARD WILL LIMIT WARRANTY TO 90 DAYS
WITH PROOF OF PURCHASE.
WARRANTY COVERAGE: This product is warranted against defective materials or workmanship. The warranty is void if the product has
been damaged by accident, misuse, neglect, modication or improper service or repairs by unauthorized personnel. It is also void if
damaged in shipment or by other causes not arising out of defects in the materials or workmanship. This warranty does not extend to
any units which have been in violation of written instructions furnished.This warranty covers only the product and its specic parts, not
food or other products processed in it.
WARRANTY DISCLAIMERS: This warranty is in lieu of all warranties expressed or implied, and no representative or person is
authorized to assume any other liability in connection with the sale of our products. There shall be no claims for defects or failure of
performance under any theory of sort, contract or commercial law including, but not limited to negligence, gross negligence, strict
liability or breach of contract.The manufacturer declines all responsibility for damage to persons, things or animals arising from the
failure to comply with the norms contained in this manual.The manufacturer reserves the right to make modications at anytime to the
models while maintaining the main characteristics described herein.The manufacturer also declines all responsibility for any errors in
compiling this manual.
WARRANTY PERFORMANCE: During the above one year warranty period, a product with a defect will either be repaired or replaced
after the product has been inspected by an LEM ServiceTechnician. LEM RESERVES THE RIGHT TO REFUSEWARRANTY PERFORMANCE
OR PRODUCT EVALUATION UNLESS THE ORIGINAL SALES RECEIPT OR THEWARRANTY CARD IS ON FILE. The repaired product will
be in warranty for the balance of the one year warranty period. No charge will be made for such repair or replacement.
IMPORTANT NOTICE: If any parts are missing or defective, please contact our Customer Service Department for assistance at
877-536-7763. (M-F 8:30am to 4:30pm EST) DO NOT RETURN TO THE STORE WHERE THE PRODUCT WAS PURCHASED.
LEM PRODUCTS MERCHANDISE RETURN POLICY WARRANTY SERVICE: To obtain service under terms of this warranty, please
contact us at 877-536-7763 to obtain authorization prior to returning the merchandise. No merchandise will be accepted without prior
authorization. Please return the product prepaid in the original packaging if possible, enclose a copy of your receipt, (Keep a copy of
your proof-of purchase for your records.) and include a written explanation of the issue. Ship to LEM Products, 4440 Muhlhauser Rd.,
Suite 300, West Chester, OH 45011. LEM Products is not responsible for damage incurred in shipping, make certain to pack product
properly. Return shipping charges are the responsibility of the purchaser. Packages returned to LEM should be insured for the value of
the product to cover any damages that may occur during shipping.

LEM Products • West Chester, OH 45011 • PH: 1-877-536-7763 • lemproducts.com LEM Products • West Chester, OH 45011 • PH: 1-877-536-7763 • lemproducts.com 2 11
IT IS IMPORTANT TO READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND SAFEGUARDS PRIOR TO USE
1. Always ensure that the appliance is properly assembled and safely set up before use.
2. CAUTION: This appliance is not recommended for use near or by children or persons with certain disabilities. Set up and
store the appliance out of reach of children. When not in use, store device in a secure and dry place out of reach of children.
3. The appliance is designed for domestic use and not for commercial purposes.
4. DO NOT use the appliance on bones, deep frozen food, hard items or non-food items.
5. Use the appliance with the supplied accessories only. WARNING: The use of attachments not recommended or sold by the
manufacturer may cause injury, damage to personal property, and may void your warranty.
6. WARNING: Do not use while under the inuence of alcohol or drugs (prescription or non-prescription) as these may
impair user’s ability to properly assemble or safely operate the appliance.
7. The manufacturer declines any responsibility in the case of improper use of this product. Improper use of this product
voids the warranty.
8. Thoroughly hand-wash all parts in warm soapy water prior to use. DO NOT SOAK. NOT DISHWASHER SAFE
(discoloration may occur).
9. Tie back loose hair and clothing. Remove neckties, rings, watches, bracelets or other jewelry before operating the appliance.
10.
SAVE THESE INSTRUCTIONS
PARTS LIST
1. Hand wash all parts of the Jerky Cannon® in warm, soapy water and rinse with warm water.
2. In a glass or stainless steel bowl, mix the Backwoods® Seasoning with water by following the directions on the bag. Add
the seasoning/cure mixture to the lean meat and mix until the meat becomes tacky.
3. With wet hands, take part of the meat mixture and form a log. Drop the log into the barrel of the Jerky Cannon®. Fill the
barrel until the mixture is about 1 inch from the top. Now take the barrel and insert the plunger of the rod into the end of
the barrel, then twist the barrel onto the threads in the handle. (* See DIAGRAM A for additional illustration.) Select a
nozzle, at for Jerky or round for Snack Sticks and attach it to the end of the barrel.
4. Place a rack on a sheet pan or cookie sheet and shoot strips onto the rack.You can shoot the strips directly onto the pan or
sheet, but the rack speeds up the drying. (If a dehydrator is being used, shoot the strips directly onto the dehydrator trays
and dry according to dehydrator manufacturer’s instructions.)
5. Place the rack and pan in the oven, pre-heated to 200º and close the door to the first stop. Dry Snack Sticks or Jerky for 75
minutes, then remove pan, turn Snack Sticks or Jerky over and return to oven for 60 minutes. Check Snack Sticks or Jerky by
removing a piece, cooling it, and tasting it. If it is not dry enough, return Snack Sticks to oven for 5-minute intervals until
correct dryness is reached. The drier the Snack Sticks or Jerky are, the longer it will keep, but the tougher it is to chew.
6. Always be sure your Jerky and Snack Sticks are completely cooled before refrigerating in a closed container. If the meat is
not completely cooled, as the heat escapes from the meat it will create moisture in the bag or container. The moisture
could cause the formation of mold on the Jerky or Snack Sticks. It is also recommended to pat the Jerky and Snack Sticks
with a paper towel to remove excess moisture or fat droplets.
7. IMPORTANT:
When Jerky is completely cooled, put into container or bag and seal tightly. Jerky should be refrigerated.
The drier the Jerky, the longer it will keep, but the tougher it is to eat.
For additional Backwoods® Snack Stick Seasonings check with the dealer where you purchased the Jerky Cannon® or contact:
LEM Products, 4440 Muhlhauser Rd. West Chester, Ohio 45011 or call (toll free) 1-877-536-7763.
Your Jerky Cannon® is designed to give you years of dependable service. With this Jerky Cannon® you will be able to make delicious Jerky
and Snack Sticks from lean, ground meat. Use meat that is as lean as possible, 90-95% lean works best. You can use beef, elk, deer, bualo,
turkey and other types of wild game. If the ground meat has been frozen, it can be thawed and used to make Jerky or Snack Sticks.
Cure: When making Jerky or Snack Sticks, conditions are right for botulism to develop. Meat Cure (sodium nitrite) is used to prevent
botulism. You should always use cure when making Jerky or Snack Sticks. Cure should be used at a rate of a scant 1/4 teaspoon per pound
of meat. NO MORE. Cure is pre-measured and included with Backwoods® Seasonings, so you use the correct amount.
One thing to remember - all the times and temperatures given in these instructions are merely averages. Cooking time may vary
according to the fat content of the meat and the temperature of the oven or dehydrator being used.The rst several batches will need to be
watched closely, so the desired dryness of the meat is reached. After these rst batches, you should be able to determine the cooking times
that are right for you.
Seasonings: You can create your own jerky or snack stick seasoning if you want.There are countless recipes available. However, as we
mentioned above, cure (sodium nitrite) should always be used. LEM carries a wide assortment of avors of Backwoods® Jerky and Snack
Stick Seasonings for your enjoyment. Adding additional ingredients to make it hot, spicy, smoky, etc can change the original seasoning to
give you a variety of avors. Using Backwoods® Seasonings will ensure that the ground meat will always make rm strips and sticks. But
the most important reason to continue using Backwoods® Seasonings is it’s delicious!
DIRECTIONS
MAKING JERKY
GENERAL WARNINGS AND SAFETY INFORMATION
DIAGRAM A:
For ease of use put the piston into the barrel at a slight
angle (1) and then straighten the rod and push in (2).
18
Description
Barrel Brush
Screws
Handle Cover Right
Handle Cover Left
Qty
1
2
1
1
Part
24
25
26
27
Description
Piston Washer
Piston
Barrel
Snack Stick Nozzle
Jerky Nozzle
Front Retaining Ring
Qty
2
1
1
1
1
1
Part
17
18
20
21
22
23
Description
Handle Assembly
Spacer
Rear Retaining Ring
Spring Rod Holder
Piston Rod
Piston Rod Nut
Qty
1
1
1
1
1
1
Part
8
12
13
14
15
16
Description
Rod Pull Nut
Rod Pull
Recoil Release Plate
Recoil Release Spring
Gripper Plate
Piston Rod Spring
Qty
1
1
1
1
1
1
Part
1
2
3
4
5
7