LEM MIGHTY BITE 1606 Parts list manual

USE & MAINTENANCE
1606&1606SS
LEM Products • West Chester, OH 45011 •877-536-7763 • lemproducts.com
LEM Products • West Chester, OH 45011 • PH: 877-536-7763 • lemproducts.com
SAUSAGE STUFFER
2YEAR
WARRANTY
ATTENTION:
If any components of this unit are broken,
or if the unit does not operate properly,
please contact LEM Products at
877-536-7763
For more great products or a free catalog
log onto lemproducts.com

IMPORTANT WARRANTY INFORMATION PLEASE READ
FILL OUT AND RETURN ENCLOSED WARRANTY CARD
THIS WARRANTY COVERS:
LEM 1606 &1606SS 5 lb. Mighty Bite Sausage Stuer
THE WARRANTY IS EXTENDED TO THE ORIGINAL PURCHASER ONLY
WARRANTY DURATION: This product is warranted to the original purchaser for a period of two (2) years from the original
purchase date. EACH UNIT COMES WITH A WARRANTY CARD, WHICH MUST BE FILLED OUT COMPLETELY AND RETURNED
IMMEDIATELY, WITH A COPY OF THE PURCHASING RECEIPT. FAILURE TO RETURN YOUR WARRANTY CARD WILL LIMIT
WARRANTY TO 90 DAYS WITH PROOF OF PURCHASE.
WARRANTY COVERAGE: This product is warranted against defective materials or workmanship.The warranty is void if the
product has been damaged by accident, misuse, neglect, modication or improper service or repairs by unauthorized personnel.
It is also void if damaged in shipment or by other causes not arising out of defects in the materials or workmanship.This warranty
does not extend to any units which have been in violation of written instructions furnished. This warranty covers only the product
and its specic parts, not food or other products processed in it.
WARRANTY DISCLAIMERS: This warranty is in lieu of all warranties expressed or implied, and no representative or person is
authorized to assume any other liability in connection with the sale of our products.There shall be no claims for defects or failure
of performance under any theory of sort, contract or commercial law including, but not limited to negligence, gross negligence,
strict liability or breach of contract.The manufacturer declines all responsibility for damage to persons, things or animals arising
from the failure to comply with the norms contained in this manual.The manufacturer reserves the right to make modications at
anytime to the models while maintaining the main characteristics described herein. The manufacturer also declines all responsibility
for any errors in compiling this manual.
WARRANTY PERFORMANCE: During the warranty period, a product with a defect will either be repaired or replaced after the
product has been inspected by an LEM Service Technician. LEM RESERVES THE RIGHT TO REFUSE WARRANTY PERFORMANCE
OR PRODUCT EVALUATION UNLESS THE ORIGINAL SALES RECEIPT OR THE WARRANTY CARD IS ON FILE. The repaired
product will be in warranty for the balance of the warranty period. No charge will be made for such repair or replacement.
IMPORTANT NOTICE: If any parts are missing or defective, please contact our Customer Service Department for assistance at
877-536-7763 (M-F 8:30am to 4:30pm EST). DO NOT RETURN TO THE STORE WHERE THE PRODUCT WAS PURCHASED. LEM
Products is not responsible for, or will not cover under warranty, missing or damaged parts on discounted/clearance, resale or nal
sale items where the seller may not be able to guarantee full functionality or completeness of the unit.
LEM PRODUCTS MERCHANDISE RETURN POLICY WARRANTY SERVICE: To obtain service under terms of this warranty,
please contact us at 877-536-7763 to obtain authorization prior to returning the merchandise. No merchandise will be accepted
without prior authorization. Prior to returning the product for warranty repair the product must be thoroughly cleaned and free
from any food particles or other debris. Failure of the purchaser to comply with this standard may result in the unit being returned
without repair. In some cases, a $50 cleaning surcharge may apply. Please return the product prepaid in the original packaging if
possible, enclose a copy of your receipt, (keep a copy of your proof-of-purchase for your records) and include a written explanation
of the issue. Ship to LEM Products, 4440 Muhlhauser Road, Suite 300,West Chester, OH 45011. LEM Products is not responsible for
damage incurred in shipping, make certain to pack product properly. Return shipping charges are the responsibility of the purchaser.
Packages returned to LEM should be insured for the value of the product to cover any damages that may occur during shipping.
Revised October 18, 2017
LEM Products • West Chester, OH 45011 • PH: 877-536-7763 • lemproducts.com
7
2
* For both gears with washer order 606-19 ** For complete air release valve order 606-9
CAUTION
Before using the stuer for the rst time please make sure to read carefully and thoroughly
through these operating instructions and the safety advice. Familiarize yourself completely
with the functions of this product.
GENERAL WARNINGS AND SAFETY INFORMATION
1. Always ensure that the product is properly assembled and safely set up before use. Read assembly
instructions in manual.
2. Any time you complete stung or raise the Piston out of the Cylinder, release the Handle slowly. Pressure or
gravity could cause the Handle to spin back causing injury.
3. Check for damaged parts before using the product. Check that all parts are operating properly and perform the
intended functions. Check for binding of moving parts, mounting and any other conditions that may apply.
4. The product is designed exclusively for domestic use and not for commercial purposes.
5. Do not force. Use correct sausage stuer for your application. The correct sausage stuer will do the job better
and safer at the rate for which it was designed.
6. Keep your work area clean and well lit. Cluttered work benches and dark work areas may cause accidents or injury.
7. Handle carefully! Keep ngers and loose objects away from moving parts.
8. Tie back loose hair and clothing. Remove neckties, rings, watches, bracelets and all other jewelry before operating
the unit.
9. Use the product with the supplied accessories only. WARNING: The use of attachments not recommendedor sold
by the manufacturer may cause injury, damage to personal property, and may void your warranty.
10. WARNING: Do not use while under the inuence of alcohol or drugs (prescription or nonprescription) as these
may impair user’s ability to properly assemble or safely operate the product.
11.Thoroughly hand-wash all removable parts in warm soapy water prior to use. Do not soak. NOT DISHWASHER
SAFE (discoloration may occur).
12.Use product on a level, stable surface to prevent tipping. Secure product with clamps on surface prior to use. Never
move the product while unit is in use.
13. CAUTION: This product is not recommended for use near or by children or persons with certain disabilities
without proper supervision. Set up and store the product out of reach of children. When not in use, store device
in a secure dry place out of reach of children.
14. The manufacturer declines any responsibility in the case of improper use of this product. Improper use of this
product voids the warranty.
15. Avoid contacting moving parts.
16. WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible
conditions or situations that could occur. It must be understood by the operator that common sense must be used.
17. SAVE THESE INSTRUCTIONS

LEM Products • West Chester, OH 45011 • PH: 877-536-7763 • lemproducts.comLEM Products • West Chester, OH 45011 • PH: 877-536-7763 • lemproducts.com
5
4
21
8
3
4
5
6
7
11
10
9
16
24
23
32
2
22
14
13
31
18
36
12
2120
27
15
26
25
28
1
34
33
17
30
29
19
27
35
PART# DESCRIPTION QTY.PCS.
1 Stuffing Tube (Large) 1
2 Stuffing Tube (Medium) 1
3 Stuffing Tube (Small) 1
4
Retaining Ring
1
5 Cylinder 1
6 Piston Gasket 1
7 Piston 1
8 Threaded Rod 1
9 Acorn Nut
(M6)
1
10 O-Ring for Air-Release Valve 1
11 Air Release Valve 1
12 Upper Cover 1
13 Metal Fixing Bushing 1
14 Washer for Vercal Gear 1
15 Vercal Metal Gear 1
16 Plasc Posioning Bushing 1
17 Vercal Sha2
18 LeStop Plate 1
19 Long Hexagon Socket Buon Head Screw (M8*40) 2
20 Hexagon Socket Buon Head Screw (M8*30) 3
21 Plain Washer 8
22 Horizontal Metal Gear 1
23 Horizontal Gear Bushing 1
24 Hexagon Socket Set Screw with Flat Point (M6*6) 1
25 Handle Set 1
26 Hexagon Socket Head Cap Screw (M10*35) 2
27 Plain Base Washer 4
28 Lower Cover 1
29 Acorn Nut
（
M8
）
3
30 Hexagon Nut
（
M8
）
2
31 Right Stop 1
32 Base 1
33 Spring Washer 2
34 Base Hexagon Nut
（
M10
）
2
35 L-Hexagon Wrench 1
36 Clamps 2
* Parts 1,2,3 sold as a set
Parts 9,10,11 sold as a set

Before using the stuer, always apply a food-grade lubricant to the inside of the cylinder and gasket to
decrease friction.
1. Collect ingredients: ground meat, ground pork or pork fat, your choice of sausage seasonings, cure (if used) and
casings. (LEM carries a wide variety of casings, sausage seasonings, cure and other sausage enhancers.)
2. LEM suggests using an 80/20 ratio of lean meat to pork or pork fat. This ratio will make for a juicy sausage.
3. Combine meat with pork, seasonings (and cure if used), and 1 oz. of water per pound of meat being mixed.
Water will not weaken the avor but allows the meat to ow more freely through the stuer and tube.
4. After meat is mixed, immediately begin the stung process. Meat mixed with the seasoning will quickly“set up”
and become dicult to work with, which will cause undue stress on the stuer gears.
5. Attach the handle to the gear. Tighten set screw with included allen wrench.
6. Free the cylinder by turning/cranking the handle counter-clockwise until the piston is free of the cylinder. Slide
the cylinder out of the frame.
7. Place seasoned meat in the cylinder. Pack the meat tightly to minimize air pockets.
8. Slide the cylinder back into the frame.
9. Remove the retaining ring. Select the proper sized stung tube and insert it into the retaining ring. Screw the
ring tightly to the cylinder.
10. Turn the handle clockwise so the piston moves down into the cylinder and the meat is extruded just to the end of
the stung tube.
11. Slide the casing onto the proper size stung tube. (When using collagen casings it may be necessary to unfurl
the casings and feed them on, just like natural casings.)
12. Fill casings until rm. If twisting into links is desired, you can do so as you ll or after the entire casing is lled. If
the latter is desired do not over ll casing or it may burst upon twisting.
13. After extruding all the meat from the cylinder, turn the handle counter-clockwise so the piston backs out of the
cylinder.
1. Remove the cylinder for cleaning.
2. Remove piston by unscrewing clockwise.
3. Remove air release valve by unscrewing the acorn nut.
4. Remove gasket from piston with a rounded tip of a spoon or similar dull tool.
5. To assist in removing excess meat from the Stung Tube tightly twist a corner of a paper towel, insert the
twisted end into the stung tube and push meat out. A small wooden dowel or other straight, dull object is also
helpful for this task.
6. Wash all removable parts in hot soapy water and dry thoroughly.
7. Wipe down the frame, base and gear case of the stuer with a warm damp cloth.
8. Reassemble and spray with food grade Silicone Spray. (Available at LEM Products.)
Stuffer is hard to crank:
• Sausage mixture has become too stiff. Add water to mix.
• Add lubricant (mineral oil or vegetable oil) to the Piston Gasket and the interior of the Cylinder.
Meat is passing by the Piston:
• Gasket is not installed.
• Gasket needs to be lubricated.
Casings are bursting when filling:
• Casings are old and brittle.
• Casings were not soaked long enough.
• Casings were soaked too long.
• Casings should not have been soaked.
• Casings were filled too tightly.
• Stuffing Tube has a burr and is puncturing the casing.
• Stuffing tube is too large for casings.
When salt is mixed with the meat along with other spices and ingredients, it causes the meat to stien, or“set-up”very
much like cement. This process only requires 20-30 minutes to take eect. It then becomes very dicult to push the meat
mixture through the stuer. With a geared sausage stuer, a stiened meat mixture causes wear on the gears. We
strongly recommend that the meat mixture be packed into the sausage stuer right after it is mixed. Then, quickly stu
the casings while the meat is pliable. Applying food grade grease to the gears will make the gears work more
smoothly and turning the handle much easier.
LEM Products recommends that you use 1 oz. of water for each pound of meat used. If you are using soy protein
concentrate, you can use 2 oz. of water per pound of meat.
Clean the stuer using a mild detergent and warm water. Rinse and hand dry all parts. With normal use and
maintenance, this stuer will give you years of enjoyment. After washing the unit, spray it with a food grade Silicone
Spray. This will prevent oxidation and will keep your stuer like new. This silicone coating can be washed o easily with
hot soapy water before the next use. Silicone Spray is available from LEM Products.
CLEANING, ASSEMBLY AND PROPER USE
TROUBLESHOOTING
MAKING SAUSAGE
LEM Products • West Chester, OH 45011 • PH: 877-536-7763 • lemproducts.comLEM Products • West Chester, OH 45011 • PH: 877-536-7763 • lemproducts.com
3
6
CAUTION
This product is not recommended for use near or by children or persons with certain disabilities
without proper supervision. Set up and store the product out of reach of children.
When not in use, store product in a secure and dry place out of reach of children.
HANDLE CAREFULLY!
KEEP FINGERS AND LOOSE OBJECTS AWAY FROM MOVING PARTS!
WARNING
Always ensure that the product is properly assembled and safely set up before use.
Read assembly instructions in manual.