Lenovo ThinkSystem SR630 V3 User manual

ThinkSystem SR630 V3
System Configuration Guide
Machine Types: 7D72, 7D73, 7D74

Note
efore using this information and the product it supports, be sure to read and understand the safety
information and the safety instructions, which are available at:
https://pubs.lenovo.com/safety_documentation/
In addition, be sure that you are familiar with the terms and conditions of the Lenovo warranty for your server,
which can be found at:
http://datacentersupport.lenovo.com/warrantylookup
Second Edition (May 2023)
© Copyright Lenovo 2023.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services
Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-
35F-05925.

Contents
Contents . . . . . . . . . . . . . . . . . i
Sa ety . . . . . . . . . . . . . . . . . . iii
Safety inspection checklist . . . . . . . . . . . iv
Chapter 1. Introduction . . . . . . . . . 1
Features. . . . . . . . . . . . . . . . . . . 1
Tech Tips . . . . . . . . . . . . . . . . . . 2
Security advisories . . . . . . . . . . . . . . 3
Specifications . . . . . . . . . . . . . . . . 3
Technical specifications. . . . . . . . . . . 4
Mechanical specifications . . . . . . . . . 10
Environmental specifications . . . . . . . . 10
Management options. . . . . . . . . . . . . 15
Chapter 2. Server components . . . . 19
Front view . . . . . . . . . . . . . . . . . 19
Rear view . . . . . . . . . . . . . . . . . 26
Top view . . . . . . . . . . . . . . . . . 31
Front I/O module . . . . . . . . . . . . . . 33
System-board-assembly layout . . . . . . . . 35
System-board-assembly connectors. . . . . 36
System-board-assembly switches. . . . . . 38
System LEDs and diagnostics display . . . . . . 40
Troubleshooting by system LEDs and
diagnostics display. . . . . . . . . . . . 40
Chapter 3. Parts list . . . . . . . . . . 63
Power cords . . . . . . . . . . . . . . . . 66
Chapter 4. Unboxing and setup . . . . 69
Server package contents . . . . . . . . . . . 69
Identify the server and access the Lenovo XClarity
Controller . . . . . . . . . . . . . . . . . 69
Server setup checklist . . . . . . . . . . . . 71
Chapter 5. System con iguration . . . 73
Set the network connection for the Lenovo XClarity
Controller . . . . . . . . . . . . . . . . . 73
Set front US port for Lenovo XClarity Controller
connection. . . . . . . . . . . . . . . . . 74
Update the firmware . . . . . . . . . . . . . 75
Configure the firmware . . . . . . . . . . . . 78
Enable Software Guard Extensions (SGX). . . . . 79
RAID configuration . . . . . . . . . . . . . 80
Deploy the operating system. . . . . . . . . . 80
ack up the server configuration . . . . . . . . 81
Appendix A. Getting help and
technical assistance . . . . . . . . . . 83
efore you call . . . . . . . . . . . . . . . 83
Collecting service data . . . . . . . . . . . . 84
Contacting Support . . . . . . . . . . . . . 85
Appendix B. Documents and
supports . . . . . . . . . . . . . . . . 87
Documents download . . . . . . . . . . . . 87
Support websites . . . . . . . . . . . . . . 87
Appendix C. Notices. . . . . . . . . . 89
Trademarks . . . . . . . . . . . . . . . . 90
Important notes . . . . . . . . . . . . . . . 90
Electronic emission notices . . . . . . . . . . 90
Taiwan Region SMI RoHS declaration . . . . . 91
Taiwan Region import and export contact
information . . . . . . . . . . . . . . . . 91
© Copyright Lenovo 2023 i

ii ThinkSystem SR630 V3 System Configuration Guide

Sa ety
efore installing this product, read the Safety Information.
Antes de instalar este produto, leia as Informações de Segurança.
在安装本产品之前，请仔细阅读 Safety Information （安全信息）。
Læs sikkerhedsforskrifterne, før du installerer dette produkt.
Lees voordat u dit product installeert eerst de veiligheidsvoorschriften.
Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information.
Avant d'installer ce produit, lisez les consignes de sécurité.
Vor der Installation dieses Produkts die Sicherheitshinweise lesen.
Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.
Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet.
Antes de instalar este produto, leia as Informações sobre Segurança.
© Copyright Lenovo 2023 iii

Antes de instalar este producto, lea la información de seguridad.
Läs säkerhetsinformationen innan du installerar den här produkten.
Sa ety inspection checklist
Use the information in this section to identify potentially unsafe conditions with your server. As each machine
was designed and built, required safety items were installed to protect users and service technicians from
injury.
Note: The product is not suitable for use at visual display workplaces according to §2 of the Workplace
Regulations.
Note: The set-up of the server is made in the server room only.
CAUTION:
This equipment must be installed or serviced by trained personnel, as de ined by the NEC, IEC 62368-
1 & IEC 60950-1, the standard or Sa ety o Electronic Equipment within the Field o Audio/Video,
In ormation Technology and Communication Technology. Lenovo assumes that you are quali ied in
the servicing o equipment and trained in recognizing hazards energy levels in products. Access to the
equipment is by the use o a tool, lock and key, or other means o security, and is controlled by the
authority responsible or the location.
Important: Electrical grounding of the server is required for operator safety and correct system function.
Proper grounding of the electrical outlet can be verified by a certified electrician.
Use the following checklist to verify that there are no potentially unsafe conditions:
1. If your working condition necessitates the server being powered off or you intend to power off, make
sure that the power cord is disconnected.
S002
CAUTION:
iv ThinkSystem SR630 V3 System Configuration Guide

The power-control button on the device and the power switch on the power supply do not turn o
the electrical current supplied to the device. The device also might have more than one power
cord. To remove all electrical current rom the device, ensure that all power cords are
disconnected rom the power source.
Note: Under certain circumstances, powering off the server is not a prerequisite. Refer to the
precautions before conducting any tasks.
2. Check the power cord.
• Make sure that the third-wire ground connector is in good condition. Use a meter to measure third-
wire ground continuity for 0.1 ohm or less between the external ground pin and the frame ground.
• Make sure that the power cord is the correct type.
To view the power cords that are available for the server:
a. Go to:
http://dcsc.lenovo.com/#/
b. Click Precon igured Model or Con igure to order.
c. Enter the machine type and model for your server to display the configurator page.
d. Click Power ➙ Power Cables to see all line cords.
• Make sure that the insulation is not frayed or worn.
3. Check for any obvious non-Lenovo alterations. Use good judgment as to the safety of any non-Lenovo
alterations.
4. Check inside the server for any obvious unsafe conditions, such as metal filings, contamination, water or
other liquid, or signs of fire or smoke damage.
5. Check for worn, frayed, or pinched cables.
6. Make sure that the power-supply cover fasteners (screws or rivets) have not been removed or tampered
with.
© Copyright Lenovo 2023 v

vi ThinkSystem SR630 V3 System Configuration Guide

Chapter 1. Introduction
The ThinkSystem SR630 V3 server (7D72, 7D73, 7D74) is a high-performance, multi-core 1U rack server
designed to support many kinds of Information Technology (IT) workloads with high agility. It carries the most
advanced processing and memory units and can scale up to the state-of-the-art liquid cooling solutions. This
server is ideally suited for IT environments that require superior processor performance, flexible
manageability, and thermal efficiency.
Figure 1. ThinkSystem SR630 V3
Features
Performance, ease of use, reliability, and expansion capabilities are key considerations in the design of your
server. These design features make it possible for you to customize the system hardware to meet your needs
today, and provide flexible expansion capabilities for the future.
Your server implements the following features and technologies:
• Features on Demand
If a Features on Demand feature is integrated in the server or in an optional device that is installed in the
server, you can purchase an activation key to activate the feature. For information about Features on
Demand, see:
https://fod.lenovo.com/lkms
• Lenovo XClarity Controller (XCC)
The Lenovo XClarity Controller is the common management controller for Lenovo ThinkSystem server
hardware. The Lenovo XClarity Controller consolidates multiple management functions in a single chip on
the server system board (system board assembly). Some of the features that are unique to the Lenovo
XClarity Controller are enhanced performance, higher-resolution remote video, and expanded security
options.
The server supports Lenovo XClarity Controller 2 (XCC2). For additional information about Lenovo XClarity
Controller 2 (XCC2), refer to https://sysmgt.lenovofiles.com/help/topic/lxcc_frontend/lxcc_overview.html.
• UEFI-compliant server irmware
Lenovo ThinkSystem firmware is Unified Extensible Firmware Interface (UEFI) compliant. UEFI replaces
IOS and defines a standard interface between the operating system, platform firmware, and external
devices.
Lenovo ThinkSystem servers are capable of booting UEFI-compliant operating systems, IOS-based
operating systems, and IOS-based adapters as well as UEFI-compliant adapters.
Note: The server does not support Disk Operating System (DOS).
• Active Memory
© Copyright Lenovo 2023 1

The Active Memory feature improves the reliability of memory through memory mirroring. Memory
mirroring mode replicates and stores data on two pairs of DIMMs within two channels simultaneously. If a
failure occurs, the memory controller switches from the primary pair of memory DIMMs to the backup pair
of DIMMs.
• Large system-memory capacity
The server supports synchronous dynamic random-access memory (SDRAM) registered dual inline
memory modules (DIMMs) with error correcting code (ECC). For more information about the specific types
and maximum amount of memory, see “Technical specifications” on page 4.
• Integrated network support
The server comes with an integrated 1-port Gigabit Ethernet controller with an RJ-45 connector, which
supports connection to a 1000 Mbps network.
• Large data-storage capacity and hot-swap capability
With the hot-swap feature, you can add, remove, or replace hard disk drives without turning off the server.
Storage capacity is different depending on server models. See “Technical specifications” on page 4 for
more information.
• Lightpath Diagnostics
Lightpath Diagnostics provides LEDs to help you diagnose problems. For more information about the
Lightpath Diagnostics, see “System LEDs and diagnostics display” on page 40.
• Mobile access to Lenovo Service In ormation website
The server provides a QR code on the system service label, which is on the cover of the server, that you
can scan using a QR code reader and scanner with a mobile device to get quick access to the Lenovo
Service Information website. The Lenovo Service Information website provides additional information for
parts installation, replacement videos, and error codes for server support.
• Active Energy Manager
Lenovo XClarity Energy Manager is a power and temperature management solution for data centers. You
can monitor and manage the power consumption and temperature of Converged, NeXtScale, System x,
and ThinkServer servers, and improve energy efficiency using Lenovo XClarity Energy Manager.
• Redundant networking connection
The Lenovo XClarity Controller provides failover capability to a redundant Ethernet connection with the
applicable application installed. If a problem occurs with the primary Ethernet connection, all Ethernet
traffic that is associated with the primary connection is automatically switched to the optional redundant
Ethernet connection. If the applicable device drivers are installed, this switching occurs without data loss
and without user intervention.
• Redundant cooling
The redundant cooling by the fans in the server enables continued operation if one of the fan rotors fails.
See “Thermal rules” in User Guide or Hardware Maintenance Guide for more information.
• ThinkSystem RAID support
The ThinkSystem RAID adapter provides hardware redundant array of independent disks (RAID) support
to create configurations. The standard RAID adapter provides RAID levels 0, 1, and 10. Optional RAID
adapter with RAID 5, 50, 6, and 60 is available for purchase.
Tech Tips
Lenovo continually updates the support website with the latest tips and techniques that you can use to solve
issues that your server might encounter. These Tech Tips (also called retain tips or service bulletins) provide
procedures to work around issues or solve problems related to the operation of your server.
2ThinkSystem SR630 V3 System Configuration Guide

To find the Tech Tips available for your server:
1. Go to http://datacentersupport.lenovo.com, and input the model name or machine type of your server in
the search bar to navigate to the support page.
2. Click on How To’s from the navigation pane.
3. Click Article Type ➙ Solution from the drop-down menu.
Follow the on-screen instructions to choose the category for the problem that you are having.
Security advisories
In order to protect our customers and their data, Lenovo is committed to developing products and services
that adhere to the highest security standards. When potential vulnerabilities are reported, it is the
responsibility of the Lenovo Product Security Incident Response Team (PSIRT) to investigate and provide
information to our customers so that they may put mitigation plans in place as we work toward providing
solutions.
The list of current advisories is available at the following site:
https://datacentersupport.lenovo.com/product_security/home
Speci ications
Summary of the features and specifications of the server. Depending on the model, some features might not
be available, or some specifications might not apply.
Refer to the below table for specifications categories and the content of each category.
Speci ication
category
Technical specifications Mechanical specifications Environmental specifications
Content • Processor
• Memory
• Internal drives
• Expansion slots
• Graphics processing units
(GPU)
• Integrated functions and I/O
connectors
• Network
• Rear button
• RAID adapter
• Host bus adapter
• System fan
• Electrical input
• Minimal configuration for
debugging
• Operating systems
• Dimension
• Weight
• Acoustical noise emissions
• Ambient temperature
management
• Environmental
Chapter 1.Introduction 3

Technical speci ications
Summary of the technical specifications of the server. Depending on the model, some features might not be
available, or some specifications might not apply.
• “Processor” on page 4
• “Memory” on page 5
• “Internal drives” on page 6
• “Expansion slots” on page 6
• “Graphics processing unit (GPU)” on page 6
• “Integrated functions and I/O connectors” on page 7
• “Network” on page 7
• “Rear button” on page 7
• “RAID adapter” on page 8
• “Host bus adapter” on page 8
• “System fan” on page 9
• “Electrical input” on page 9
• “Minimal configuration for debugging” on page 10
• “Operating systems” on page 10
Processor
Processor
Supports multi-core Intel Xeon processors, with integrated memory controller and Intel Mesh UPI (Ultra Path
Interconnect) topology.
• Up to two 4th Gen Intel Xeon scalable processors with the new LGA 4677-X socket
• Up to 60 cores per socket
• Up to 4 UPI links at up to 16 GT/s
• Thermal Design Power (TDP): up to 350 watts
For a list of supported processors, see: https://serverproven.lenovo.com.
4ThinkSystem SR630 V3 System Configuration Guide

Memory
Memory
See “Memory module installation order” in User Guide or Hardware Maintenance Guide for detailed information about
memory configuration and setup.
• Slots: 32 dual inline memory module (DIMM) connectors that support up to:
– 32 DDR5 DIMMs
• Memory module type:
– TruDDR5 4800MHz RDIMM: 16 G (1Rx8), 32 G (2Rx8)
– TruDDR5 4800MHz 10x4 RDIMM: 32 G (1Rx4), 64 G (2Rx4)
– TruDDR5 4800MHz 9x4 RDIMM: 32 G (1Rx4), 64 G (2Rx4)
– TruDDR5 4800MHz 3DS RDIMM: 128 G (4Rx4), 256 G (8Rx4)
• Speed: Operating speed depends on processor model and UEFI settings.
– 4800 MT/s for 1 DIMM per channel
– 4400 MT/s for 2 DIMMs per channel
• Minimum memory: 16 G
• Maximum memory: 8 T : 32 x 256 G 3DS RDIMMs
For a list of supported memory options, see https://serverproven.lenovo.com.
For technical rules for memory modules, see “Memory module installation order” in User Guide or Hardware
Maintenance Guide.
Chapter 1.Introduction 5

Internal drives
Internal drives
Front:
• Up to four 3.5-inch hot-swap SAS/SATA drives
• Up to four 3.5-inch hot-swap Any ay (SAS/SATA/NVMe) drives
• Up to four 2.5-inch hot-swap SAS/SATA drives
• Up to four 2.5-inch hot-swap NVMe drives
• Up to eight 2.5-inch hot-swap SAS/SATA drives
• Up to six 2.5-inch hot-swap SAS/SATA and four 2.5-inch hot-swap Any ay (SAS/SATA/NVMe) drives
• Up to six 2.5-inch hot-swap SAS/SATA and two 2.5-inch hot-swap Any ay (SAS/SATA/NVMe) and two 2.5-inch
hot-swap NVMe drives
• Up to ten 2.5-inch hot-swap SAS/SATA drives
• Up to eight 2.5-inch hot-swap NVMe drives
• Up to ten 2.5-inch hot-swap NVMe drives
• Up to ten 2.5-inch hot-swap Any ay (SAS/SATA/NVMe) drives
• Up to 16 hot-swap EDSFF drives
Inside:
• Up to two internal SATA or NVMe M.2 drives
Rear:
• Up to two 2.5-inch hot-swap SAS/SATA or NVMe drives
• Up to two 7mm hot-swap SATA or NVMe drives
Notes:
• M.2 and 7mm drives are not supported at the same time.
• If 256 G DIMM is used, rear 2.5-inch drives are not supported.
Expansion slots
Expansion slots
Depending on the model, your server supports up to three PCIe slots in the rear and up to two PCIe slots in the front.
• PCIe x16, low-profile
• PCIe x16/x16, low-profile + low-profile
• PCIe x16/x16, low profile + full-height
• PCIe x16, full-height
Graphics processing unit (GPU)
Graphics processing unit (GPU)
Your server supports the following GPUs:
• Half-length, single-wide:
– NVIDIA® A2
– NVIDIA® L4
Note: For GPU supporting rules, see “Thermal rules” in User Guide or Hardware Maintenance Guide.
6ThinkSystem SR630 V3 System Configuration Guide

Integrated unctions and I/O connectors
Integrated unctions and I/O connectors
• Lenovo XClarity Controller (XCC), which provides service processor control and monitoring functions, video
controller, and remote keyboard, video, mouse, and remote drive capabilities.
– The server supports Lenovo XClarity Controller 2 (XCC2). For additional information about Lenovo XClarity
Controller 2 (XCC2), refer to https://sysmgt.lenovofiles.com/help/topic/lxcc_frontend/lxcc_overview.html.
• One XCC system management port on the rear to connect to a systems-management network. This RJ-45
connector is dedicated to the Lenovo XClarity Controller functions and runs at 1 G speed.
• A group of two or four Ethernet connectors on OCP module
• Up to four US 3.2 Gen1 (5 Gbps) ports:
– Three on the rear of the server
– (Optional) One on the front of the server1
• One internal US 3.2 Gen1 (5 Gbps) port
• (Optional) One US 2.0 port on the front of the server1
• (Optional) External LCD diagnostics handset connector on the front of the server1
• Up to two VGA connectors
– One on the rear of the server
– (Optional) One on the front of the server1
• (Optional) One serial port connector on the rear of the server2
Notes:
1. Available when the front I/O module is installed in the server.
2. Available when the serial port cable is installed in the server.
Network
Network
• OCP module
Note: The OCP module is an optional part. It is default to be installed in the rear and optional in the front of the server.
Rear button
Rear button
• NMI button
Chapter 1.Introduction 7

RAID adapter
RAID adapter
Support the ollowing RAID adapters:
• ThinkSystem RAID 5350-8i PCIe 12Gb Adapter
• ThinkSystem RAID 540-8i PCIe 12Gb Adapter
• ThinkSystem RAID 540-16i PCIe 12Gb Adapter
• ThinkSystem RAID 9350-8i 2G Flash PCIe 12Gb Adapter
• ThinkSystem RAID 9350-16i 4G Flash PCIe 12Gb Adapter
• ThinkSystem RAID 940-8i 4G Flash PCIe Gen4 12Gb Adapter
• ThinkSystem RAID 940-8i 4G Flash PCIe Gen4 12Gb Adapter (Tri-mode)
• ThinkSystem RAID 940-16i 4G Flash PCIe Gen4 12Gb Adapter
• ThinkSystem RAID 940-16i 4G Flash PCIe Gen4 12Gb Adapter (Tri-mode)
• ThinkSystem RAID 940-8e 4G Flash PCIe Gen4 12Gb Adapter
• ThinkSystem RAID 940-16i 8G Flash PCIe Gen4 12Gb Adapter
• ThinkSystem RAID 940-16i 8G Flash PCIe Gen4 12Gb Adapter (Tri-mode)
• ThinkSystem RAID 5350-8i PCIe 12Gb Internal Adapter
• ThinkSystem RAID 940-16i 8G Flash PCIe Gen4 12Gb Internal Adapter
• ThinkSystem RAID 9350-8i 2G Flash PCIe Gen 4 12Gb Internal Adapter
• ThinkSystem RAID 9350-16i 4G Flash PCIe Gen 4 12Gb Internal Adapter
Host bus adapter
Host bus adapter
Support the ollowing HBAs:
• ThinkSystem 4350-8i SAS/SATA 12Gb H A
• ThinkSystem 4350-16i SAS/SATA 12Gb H A
• ThinkSystem 440-8i SAS/SATA 12Gb H A
• ThinkSystem 440-8e SAS/SATA 12Gb H A
• ThinkSystem 440-16i SAS/SATA 12Gb H A
• ThinkSystem 440-16e SAS/SATA 12Gb H A
• ThinkSystem 440-16i SAS/SATA PCIe Gen4 12Gb Internal H A
• ThinkSystem QLogic 16Gb Enhanced Gen5 FC Single-port H A
• ThinkSystem QLogic 16Gb Enhanced Gen5 FC Dual-port H A
• ThinkSystem Emulex 16Gb Gen6 FC Single-port H A
• ThinkSystem Emulex 16Gb Gen6 FC Dual-port H A
8ThinkSystem SR630 V3 System Configuration Guide

System an
System an
• Supported fan types:
– Standard fan 4056 (21000 RPM)
– Performance fan 4056 (28000 RPM)
• Fan redundancy: N+1 redundancy, one redundant fan rotor
– One processor: six hot-swap dual-rotor system fans (one redundant fan rotor)
– Two processors: eight hot-swap dual-rotor system fans (one redundant fan rotor)
Note:
The redundant cooling by the fans in the server enables continued operation if one rotor of a fan fails.
If there is an OCP module installed, when the system is powered off but still plugged in to AC power, system fan 1 and
fan 2 will continue to spin at a much lower speed. This is the system design to provide proper cooling for the OCP
module.
Electrical input
Electrical input
One or two hot-swap power supply units for redundancy support:
Ta le 1. Electrical input for power supply units
Power supply 100–127 V ac 200–240 V ac 240 V dc -48 V dc
750-watt 80 PLUS Platinum √ √ √
1100-watt 80 PLUS
Platinum
√ √ √
1800-watt 80 PLUS
Platinum
√ √
750-watt 80 PLUS Titanium √ √
1100-watt 80 PLUS
Titanium
√ √
1800-watt 80 PLUS
Titanium
√ √
1100-watt -48 V DC √
CAUTION:
• 240 V dc input is supported in Chinese Mainland ONLY.
• Power supply with 240 V dc input cannot support hot plugging power cord unction. Be ore removing the
power supply with dc input, please turn o server or disconnect dc power sources at the breaker panel or by
turning o the power source. Then, remove the power cord.
Chapter 1.Introduction 9

Minimal con iguration or debugging
Minimal con iguration or debugging
• One processor in processor socket 1
• One memory module in slot 7
• One power supply unit
• One HDD/SSD drive, one M.2 drive, or one 7mm drive (if OS is needed for debugging)
• Six system fans (with one processor)
Operating systems
Operating systems
Supported and certified operating systems:
• Microsoft Windows Server
• VMware ESXi
• Red Hat Enterprise Linux
• SUSE Linux Enterprise Server
• Canonical Ubuntu
References:
• Complete list of available operating systems: https://lenovopress.lenovo.com/osig.
• OS deployment instructions: Follow the adopted combination to install DDR5 DIMMs (see “Install the operating
system” in User Guide).
Mechanical speci ications
Summary of the mechanical specifications of the server. Depending on the model, some features might not
be available, or some specifications might not apply.
Dimension
1U server
• Height: 43.0 mm (1.69 inches)
• Width:
– With rack latches: 482 mm (18.98 inches)
– Without rack latches: 434.4 mm (17.10 inches)
• Depth: 787.6 mm (31.01 inches)
Note: The depth is measured with rack latches and the handle of the power supply unit included.
Weight
• With package: up to 26.3 kg (57.98 lb)
• Without package: up to 20 kg (44.09 lb)
Environmental speci ications
Summary of the environmental specifications of the server. Depending on the model, some features might
not be available, or some specifications might not apply.
10 ThinkSystem SR630 V3 System Configuration Guide

• “Acoustical noise emissions” on page 12
• “Ambient temperature management” on page 13
• “Environment” on page 14
Chapter 1.Introduction 11

Acoustical noise emissions
Acoustical noise emissions
The server has the following acoustic noise emissions declaration:
Ta le 2. Acoustic noise emissions declaration
Scenar-
io
Used con iguration
Sound power level
(LWAd)
Sound pressure
level (LpAm):
Idling Operat-
ing
Idling Operat-
ing
Minimal Two 150 W processors
Thirty two 64 G RDIMMs
Eight SAS hard disk drives
RAID 440-16i CFF adapter
Intel X710-T2L 10G ASE-T 2-port OCP adapter
Two 750-watt power supply units
5.8 el 6.4 el 45 d A 50 d A
Typical Two 205 W processors
Thirty two 64 G RDIMMs
Ten SAS hard disk drives
RAID 940-16i SFF adapter
Intel X710-T2L 10G ASE-T 2-port OCP adapter
Two 1100-watt power supply units
6.7 el 7.7 el 54 d A 61 d A
Storage
rich
Two 165 W processors
Thirty two 64 G RDIMMs
12 SAS hard disk drives
RAID 940-16i SFF adapter
Intel X710-T2L 10G ASE-T 2-port OCP adapter
Two 750-watt power supply units
7.5 el 7.6 el 60 d A 61 d A
GPU
rich
Two 205 W processors
Thirty two 64 G RDIMMs
Ten SAS hard disk drives
RAID 940-16i SFF adapter
Intel X710-T2L 10G ASE-T 2-port OCP adapter
Two 1100-watt power supply units
6.7 el 8.3 el 53 d A 68 d A
Notes:
12 ThinkSystem SR630 V3 System Configuration Guide