
LST800/800D
Please read this manual carefully before using this machine,
and keep it for future reference.
This machine adopts an advanced hot wedge structure,which has better heating
efficiency and faster welding speed.It specially for welding 0.2mm-1.5mm HDPE、
LDPE、PP、TPO、PVC.
Application
- Solid Waste Landfills - Chemical Mining
- Sewage Treatment - Water Conservancy
- Anti-Seepage Project - Aquaculture
LESITE
01
EN
Precautions
Please confirm that the machine is turned off and unplugged before
disassembling the welding machine, so as not to be injured by live wires
or components inside the machine.
The welding machine generates high temperature and high heat, which
may cause fire or explosion when used incorrectly,especially when it is
close to combustible materials or explosive gas.
Please do not touch the hot wedge (during welding or when the
welding machine has not completely cooled down) so as not to burn.
The power supply voltage must match the rated voltage marked on the
welding machine and be reliably grounded. Connect the welding
machine to a socket with a protective ground conductor.
In order to ensure the safety of the operators and the reliable operation
of the equipment, the power supply at the construction site must be
equipped with a regulated power supply and a leakage protector.
The welding machine must be operated under the correct control of
the operator, otherwise it may cause combustion or explosion due to
high temperature.
It is strictly forbidden to use the welding machine in water or muddy
ground, avoid soaking, rain or damp.