Leviton Decora HCM10-1DW Installation instructions

1000-Watt Scene-Capable Dimming Wall Switch Receiver HCM10-1DW
HCM10-1DW
Product
Specifications
Leviton Mfg. Co., Inc.
59-25Little Neck Pkwy • Little Neck, NY 11362-2591•Tech Line: 1-800-824-3005 • Fax: [phone]
Visit our Website at: www.leviton-lin.com
JOB NAME:
JOB NUMBER:
CATALOG NUMBERS:
SPECIFICATION SUBMITTAL
APPLICATION
Fits in standard wallboxes and replaces regular switches or
dimmers to provide local and remote ON/OFF and
BRIGHT/DIM switching in response to: local manual control,
commands sent from Leviton DHC controllers or other X-10
compatible controllers and programmers set to the same
address as this receiver.
The HCM10-1DW also will accept scene commands from
Leviton scene controllers and programmers providing the
capability to create elegant “one-touch” lighting scenes
The HCM10-1DW utilizes existing 60Hz 120V AC house wiring
for “No New Wires” installation. Leviton DHC products use the
home’s power wiring to transmit command and control
signals, providing networked home control systems without
the need for additional wiring to be present
Single-Pole or 3-Way when used with MS00R-10 Multi-
Remote unit.
Neutral connection required (except for incandescent loads.)
FEATURES AND BENEFITS
• Features Leviton’s classic Decora style rocker to blend
seamlessly with other Decora devices. HCM10-1DW is
compatible with Decora screwless and Decora standard
designer wallplates.
•Decora-style operation – push top of rocker to brighten;
bottom to dim.
•Preset feature turns lights ON at last selected brightness
level or at user-programmable minimum brightness level,
whichever is greater.
• Double tap to top of rocker switch brings light to full
output without affecting preset levels.
• Soft ON/Fade OFF feature for smooth brightness
level changes and prolonged bulb life
•Green LED display alongside rocker indicates selected
brightness level.
• Green locator LED illuminates when load is OFF.
Cat. No. HCM10-1DW
• Protected memory maintains light levels during minor
power fluctuations.
• Use inexpensive MS00R-10 remote for three and four way
applications where traditional “traveler” wiring is present
• HCM10-1DW responds to Leviton’s DHC controllers as well as
any X-10 compatible controllers from any other manufacturer.
• This device provides one-button programming through
address capturing.
•Leviton’s patented Intellisense™ Technology greatly improves
reliability and reduces false responses compared to other
manufacturers’ products by virtually eliminating signal
problems due to noise.
• Color change kits allow fast color changeovers.
Devices ship in White only. See chart for
Color Change Kits (must be purchased separately).
Decora®Home Controls
1000-Watt Scene-Capable
Dimming Wall Switch
Receiver

2
JOB NAME:
JOB NUMBER:
CATALOG NUMBERS:
SPECIFICATION SUBMITTAL
Product
Specifications HCM10-1DW
.............................
INSTALLATION CONSIDERATIONS:
Note: ACat. No. HCA02-10E coupler/repeater must be
installed in every DHC installation to insure phase to phase
coupling and maximum signal strength.
Wall Switch Receivers provide multi-station manual
and remote ON/OFF switching and full range dimming
when used with Cat. No. MS00R-10 Multi-Remote Unit
(Wall Switch Receivers with SW and DW suffix ONLY)
WARRANTY INFORMATION
Two year limited product warranty.
ORDERING INFORMATION
DIMENSIONAL DIAGRAM HCM10-1DW
STANDARDS COMPLIANCE
UL Listed (File #E-313173)
CSA Certified (File #LR-3413)
NOM Certified (#057)
SPECIFICATIONS
Provides manual and remote ON/OFF switching and full
range dimming for larger incandescent and magnetic low-
voltage lighting loads such as chandeliers and multiple high-
hats. It also provides scene control capability when used
with DHC Scene Controllers, and home control systems that
support Leviton Scene Lighting
Single-Pole or 3-Way when used with MS00R-10
Multi-Remote unit.
Neutral connection should be used but not required for
incandescent loads.
Dimensions: 4.11” H x 2.38” W x 1.38”D
Rating: 120V 60Hz
Load rating: 1000W Incandescent, 1000VA
(750W) Magnetic Low-Voltage
Operating temperature ranges from 32Fto 104F (0 – 40 C).
Relative humidity less than 90% non-condensing.
COMMUNICATION
Receives:
ON/OFF, BRIGHT/DIM, ALL LIGHTS ON, ALL UNITS ON,
ALL UNITS OFF in standard X-10 protocol.
Leviton Scene Control:
SCENE ON/SCENE OFF/SCENE BRIGHT/SCENE DIM in
extended code format 1.
PROGRAMMING
HCM10-1DWprovides one-button programming through
address capturing. Press the program button on unit until
bottom LED starts to flash. It will then accept the first address
code received as its unit address.
Note: Features and specifications are subject to change.
(35.2 mm)
1.38
2.68
(42.5 mm)
1.67
(60.3mm)
2.38
4.11
3.281
(67.6 mm)
(104.4 mm)
(83.3 mm)
B-1084/D5 js
Cat. No. Description
HCM10-1DW 1000-Watt Scene-Capable Dimming Wall
Switch Receiver
DRKDD-1LI Ivory Color Change Kit
DRKDD-1LW White Color Change Kit
DRKDD-1LA Almond Color Change Kit
DRKDD-1LG Gray Color Change Kit
DRKDD-1LE Black Color Change Kit
Leviton Mfg. Co., Inc.
59-25 Little Neck Pkwy • Little Neck, NY 11362-2591 • Tech Line: 1-800-824-3005 • Fax: [phone]
Visit our Website at: www.leviton-lin.com
©2005 Leviton Manufacturing Co., Inc.