LG Chem RESU 6.4 EX Operating and maintenance instructions

RESU 6.4 EX Quick Installation Manual
For RESU 6.4 EX Only
4th Aug 2015

Check list for Battery pack and inverter cable connections
This quick installation check list is made for RESU 6.4 EX
④
Remove the Top Cover
Pull it upwards
1
Before Connecting the cables to the inverter, installer should make sure
the circuit breaker switch position is ‘Trip’ or ’OFF’ State
①②
Check Check
③Cut the removable pieces out of the grommets
Connect the provided cable adapter to communication port
through the grommet
If necessary, connect the ground screw
through the grommet
Check
Circuit breaker
switch position
Check

(+)
(-)
Check list for Battery pack and inverter cable connections
This quick installation check list is made for RESU 6.4 EX
2
Before connecting cable from inverter, installer should make sure which cable is Positive and Negative. Normally cables are distinguished by
color or attached label.
(+)
(-)
Pack front side
Cables from
the Inverter
Terminal block
on the pack
⑤
⑥Before the operation of Circuit breaker, Recheck the cable connections
Circuit breaker switch : Trip OFF ON Check
Trip OFF ON
Remove the
protective tape
Cable requirements
: 4 AWG(21mm2) , UL 1283
Check

Check list for Battery pack and inverter cable connections
This quick installation check list is made for RESU 6.4 EX
3
⑦
Check
The status of indicator(LED) on the front turn on red and then changes to green in 7seconds
- If the status of indicator stays red, contact LG Chem or authorized dealer
⑧
Restored the Top Cover Check
For detailed information, please refer to
the installation manual enclosed