LG LW8017ERSM User manual

이 도면은 LG전자의 자산으로 불법유출시 관계법과 회사규정에 의해 처벌됨
Reason
Dimension 결과 Result
항목 Item
CTQ Table은 현재의 수준을 알기 위해서 CTQ 정보를 항상 보완 및 추가해야 한다.
Privileged & Confidential by LG Electronics
CTQ Table
상세 Spec.
NO
1
3 4 5 6A,B,C
+ -
2
3
4
판단근거
치수 공차 Tolerance Z(Sigma Level) Data
발
DIMENSION
CLASSIFICATION
ANGLE
각도
JKL MN
TOLERANCE
치
0.05 0.2 0.3
0.5
0.6
0.8
1.0
1.5
2.0
0.5
0.8
1.1
1.4
1.7
2.0
2.5
0.7 1계
30”
15”
5”
6계
2계
1계
30”
1.2
2.0
2.5
3.5
4.5
6
0.3
0.4
0.6
0.8
1.2
1.6
0.1
0.2
0.3
0.4
0.6
0.8
10 or less
over 10 ~ 30 or less
30 ~ 50
50 ~ 150
150 ~ 300
300 ~ 500
500 over
수
허
용
오
차
+
-mm
구
배
치수구분 JKL M N
기호
SYM
변경내용
REVISION
시방번호
ECO.NO.
년월일
DATE
서명
SIGNED
기호
1
2
3
4
5
6
SYM
변경내용
REVISION
시방번호
ECO.NO.
년월일
DATE
서명 금형제작처
Maker 양산처
Manufacturer 자료실/3D(UG)확인 UNITS
DRW/DSN
mm
CHKD
SCALE
CHKD APPD
N/S
TITLE
RELATION C.NO DWG.
도번
Confirm
SIGNED
7
8
9
1
1
1
0
1
2
합
Approval
의
란
作业 材质 颜色 尺寸 地区
08 黑色 148*210(装订后)北美
MFL709606
Manual,Owners
MFL709606
08
LW8017ERSM
TA
Qty
Work
Application
Site
No PART NUMBER DESCRIPTION SPECIFICATION MAKER REMARKER
08
Work
PRINTING WU GGRW YWC081UCMN2.ASWAHDP 2018 new format
Spec
O
1. 版本号变更
2. 追加”Energy
Star”标志
1
删除”Energy
Star”标志
1
EFWI800256Modify 08 work, change the caution of air conditioner wind, move the "Energy Star" mark to cover page. 2018.08.30 Boyin
LG Customer Information Center
1-800-243-0000
Register your product Online!
www.lg.com
LG Electronics Inc.
1000 Sylvan Ave., Englewood Cliffs, NJ 07632
LG Customer Information Center
1-800-243-0000
Register your product Online!
www.lg.com
LG Electronics Inc.
1000 Sylvan Ave., Englewood Cliffs, NJ 07632
www.lg.com
ESPAÑOL
Copyright © 2017-2018 LG Electronics Inc. All Rights Reserved.
OWNER’S MANUAL
AIR
CONDITIONER
Read this owner’s manual thoroughly before operating the appliance
and keep it handy for reference at all times.
TYPE: WINDOW
MFL70960608
Rev.01_082918
ENGLISH
OWNER’S MANUAL
AIR
CONDITIONER
LW8017ERSM
www.lg.com
ESPAÑOL
Copyright © 2017-2018 LG Electronics Inc. All Rights Reserved.
OWNER’S MANUAL
AIR
CONDITIONER
Read this owner’s manual thoroughly before operating the appliance
and keep it handy for reference at all times.
TYPE: WINDOW
MFL70960608
Rev.00_072718
ENGLISH
OWNER’S MANUAL
AIR
CONDITIONER
LW8017ERSM
版本号变更
2
www.lg.com
ESPAÑOL
Copyright © 2017-2018 LG Electronics Inc. All Rights Reserved.
OWNER’S MANUAL
AIR
CONDITIONER
Read this owner’s manual thoroughly before operating the appliance
and keep it handy for reference at all times.
TYPE: WINDOW
MFL70960608
Rev.02_091018
ENGLISH
OWNER’S MANUAL
AIR
CONDITIONER
LW8017ERSM
www.lg.com
ESPAÑOL
Copyright © 2017-2018 LG Electronics Inc. All Rights Reserved.
OWNER’S MANUAL
AIR
CONDITIONER
Read this owner’s manual thoroughly before operating the appliance
and keep it handy for reference at all times.
TYPE: WINDOW
MFL70960608
Rev.01_082918
ENGLISH
OWNER’S MANUAL
AIR
CONDITIONER
LW8017ERSM
删除”Energy
Star”标志
2
LG Customer Information Center
1-800-243-0000
Register your product Online!
www.lg.com
LG Electronics Inc.
1000 Sylvan Ave., Englewood Cliffs, NJ 07632
LG Customer Information Center
1-800-243-0000
Register your product Online!
www.lg.com
LG Electronics Inc.
1000 Sylvan Ave., Englewood Cliffs, NJ 07632
Spec.
WORKING SPECIFICATIONS
1. Printed contents should be satisfied with the film provided by LGE Design Dept.
2. Overall printing condition and appearance satisfied with standard sample provided by LGE for approval.
ECO-DESIGN SPECIFICATIONS
1. The part should not contain prohibited substances (Pb,Cd,Hg,Cr+6,PBB,PBDE,DEHP,BBP,DBP,DIBP)
and details should be complied with LG(10)-A-9023. Especially, ink should not contain Pb, Cd.
注记：
制作基准：
ECO-设计基准：
1.此部品不可添加禁止物质（铅、镉、汞、六价铬、PBB、PBDE、DEHP、BBP、DBP、DIBP），细节请遵照供应商指南
及相关标准LG(10)-A-9023。特别是墨水中不得添加 Pb、Cd
1.印刷内容需要与开发提供的文件一致
2.整体印刷条件和外观标准样品提供LGE批准。
6SAFETY INSTRUCTIONS
CAUTION
To reduce the risk of minor or moderate injury to persons, malfunction, or
damage to the product or property when using this product, follow basic
precautions, including the following:
INSTALLATION
●Take care when installing the product that exhaust or condensation does not damage nearby
property.
●Follow installation instructions exactly to avoid excessive vibration or water leakage.
OPERATION
●This appliance is not intended for use as a precision refrigeration system. Do not use it for special
purposes such as maintaining pets, food, precision machinery, or art objects.
●When installing or moving the appliance, be careful not to pinch, crush, or damage the power
cord.
●Make sure the air inlet and outlet are free from obstructions.
●Use a soft cloth to clean the appliance. Do not use waxes, thinners, or harsh detergents.
●Do not step on or place heavy objects on top of the appliance.
●Do not drink water drained from the appliance.
are used simultaneously.
●Remove the batteries if the remote control is not to be used for an extended period of time.
●Never mix different types of batteries, or old and new batteries for the remote control.
consult a doctor.
●Do not recharge or disassemble the batteries.
MAINTENANCE
●Never use strong cleaning agents or solvents when cleaning the air conditioner or spray water.
Use a smooth cloth.
6SAFETY INSTRUCTIONS
CAUTION
To reduce the risk of minor or moderate injury to persons, malfunction, or
damage to the product or property when using this product, follow basic
precautions, including the following:
INSTALLATION
●Take care when installing the product that exhaust or condensation does not damage nearby
property.
●Follow installation instructions exactly to avoid excessive vibration or water leakage.
OPERATION
●This appliance is not intended for use as a precision refrigeration system. Do not use it for special
purposes such as maintaining pets, food, precision machinery, or art objects.
●When installing or moving the appliance, be careful not to pinch, crush, or damage the power
cord.
●Make sure the air inlet and outlet are free from obstructions.
●Use a soft cloth to clean the appliance. Do not use waxes, thinners, or harsh detergents.
●Do not step on or place heavy objects on top of the appliance.
●Do not drink water drained from the appliance.
are used simultaneously.
●Remove the batteries if the remote control is not to be used for an extended period of time.
●Never mix different types of batteries, or old and new batteries for the remote control.
f with clean water.
consult a doctor.
●Do not recharge or disassemble the batteries.
MAINTENANCE
●Never use strong cleaning agents or solvents when cleaning the air conditioner or spray water.
Use a smooth cloth.
Do not expose people, animals, or plants to the cold or hot wind from the air conditioner for
extended periods of time.
英语第6页警告语
内容变更
1
西班牙语第6页警
告语内容变更
1
6INSTRUCCIONES DE SEGURIDAD
PRECAUCIÓN
Para reducir el riesgo de lesiones leves o moderadas a personas, el
mal funcionamiento o daño al producto o propiedad cuando use este
producto, siga las precauciones básicas, incluido lo siguiente:
INSTALACIÓN
●Al instalar el producto, tenga cuidado de que los gases de escape o la condensación no produzcan
daños materiales a su alrededor.
●Siga escrupulosamente las instrucciones de instalación para evitar vibraciones excesivas o fugas de
agua.
FUNCIONAMIENTO
especiales como la preservación de mascotas, alimentos, maquinaria de precisión u obras de arte.
●Cuando traslade o instale el aparato, tenga especial cuidado en no apretar, aplastar o dañar el cable de
alimentación.
●Asegúrese de que ni la entrada ni la salida de aire estén obstruidas.
●Utilice un paño suave para limpiar el aparato. No utilice ceras, diluyentes ni detergentes fuertes.
●No pise el aparato ni coloque objetos pesados sobre él.
●No beba agua generada por el producto.
●Asegúrese de ventilar bien el ambiente cuando el aire acondicionado y un artefacto calentador (como,
por ejemplo, un calefactor) se utilicen simultáneamente.
●Retire las pilas del control remoto si no lo va a utilizar durante un período prolongado.
●Nunca mezcle diferentes tipos de baterías o baterías viejas y nuevas en el control remoto.
●Deje de usar el control remoto si existe una pérdida de líquido de las baterías. Si su ropa o su piel
entran en contacto con el líquido proveniente de la batería, lave con agua limpia.
●Ante la ingesta de líquido proveniente de una batería que pierde, lave el interior de la boca a fondo y
consulte a un médico.
No exponga a personas, animales o plantas a la corriente fría o caliente del aire acondicionado durante
períodos prolongados.
●No recargue ni desarme las baterías.
MANTENIMIENTO
●Nunca utilice solventes o productos de limpieza fuertes para limpiar el aire acondicionado ni lo rocíe con
agua. Utilice un paño suave.
6INSTRUCCIONES DE SEGURIDAD
PRECAUCIÓN
Para reducir el riesgo de lesiones leves o moderadas a personas, el
mal funcionamiento o daño al producto o propiedad cuando use este
producto, siga las precauciones básicas, incluido lo siguiente:
INSTALACIÓN
●Al instalar el producto, tenga cuidado de que los gases de escape o la condensación no produzcan
daños materiales a su alrededor.
●Siga escrupulosamente las instrucciones de instalación para evitar vibraciones excesivas o fugas de
agua.
FUNCIONAMIENTO
especiales como la preservación de mascotas, alimentos, maquinaria de precisión u obras de arte.
●Cuando traslade o instale el aparato, tenga especial cuidado en no apretar, aplastar o dañar el cable de
alimentación.
●Asegúrese de que ni la entrada ni la salida de aire estén obstruidas.
●Utilice un paño suave para limpiar el aparato. No utilice ceras, diluyentes ni detergentes fuertes.
●No pise el aparato ni coloque objetos pesados sobre él.
●No beba agua generada por el producto.
●Asegúrese de ventilar bien el ambiente cuando el aire acondicionado y un artefacto calentador (como,
por ejemplo, un calefactor) se utilicen simultáneamente.
●Retire las pilas del control remoto si no lo va a utilizar durante un período prolongado.
●Nunca mezcle diferentes tipos de baterías o baterías viejas y nuevas en el control remoto.
●Deje de usar el control remoto si existe una pérdida de líquido de las baterías. Si su ropa o su piel
entran en contacto con el líquido proveniente de la batería, lave con agua limpia.
●Ante la ingesta de líquido proveniente de una batería que pierde, lave el interior de la boca a fondo y
consulte a un médico.
●No recargue ni desarme las baterías.
MANTENIMIENTO
●Nunca utilice solventes o productos de limpieza fuertes para limpiar el aire acondicionado ni lo rocíe con
agua. Utilice un paño suave.
EFWI900089Modify 08 work, correct drawing error, delete the unnecessary "Energy Star" mark on the back page. 2018.09.10 Boyin

www.lg.com
ESPAÑOL
Copyright © 2017-2018 LG Electronics Inc. All Rights Reserved.
OWNER’S MANUAL
AIR
CONDITIONER
Read this owner’s manual thoroughly before operating the appliance
and keep it handy for reference at all times.
TYPE: WINDOW
MFL70960608
Rev.02_091018
ENGLISH
OWNER’S MANUAL
AIR
CONDITIONER
LW8017ERSM

2TABLE OF CONTENTS
TABLE OF CONTENTS
11 Window Requirements
11 Clearance
11 Preparation of Chassis
12 Unit Installation
14 OPERATION
14 Control Panel and Remote Control
15 Wireless Remote Control
16 Ventilation
16 Air Direction
16 Additional Features
3 SAFETY INSTRUCTIONS
3 IMPORTANT SAFETY INSTRUCTIONS
8 PRODUCT OVERVIEW
8 Exterior Parts
8 Interior Parts
9 INSTALLATION
9 Electrical Data
10 Installation Overview
17 SMART FUNCTIONS
17 Using LG SmartThinQ Application
20 MAINTENANCE
20 Air Filter
21 TROUBLESHOOTING
21 Before Calling for Service
21 Normal Sounds You May Hear
25 WARRANTY

ENGLISH
3
SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always
read and follow all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or injure you and others.
All safety messages will follow the safety alert symbol and either the word WARNING or
CAUTION.
These words mean:
WARNING
You may be killed or seriously injured if you do not follow instructions.
CAUTION
You may be injured or cause damage to the product if you do not follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce
the chance of injury, and tell you what may happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING
injury to persons when using this product, follow basic precautions,
including the following:
INSTALLATION
●Before use, the appliance must be properly installed as described in this manual.
●Contact the authorized service technician for repair or maintenance of this unit.
●Contact the installer for installation of this unit.
●The air conditioner is not intended for use by young children or invalids without supervision.
●Young children should be supervised to ensure that they do not play with the air conditioner.

4SAFETY INSTRUCTIONS
●When the power cord is to be replaced, replacement work shall be performed by authorized
personnel only using only genuine replacement parts.
●Installation work must be performed in accordance with the National Electric Code by qualied
and authorized personnel only.
●Connect to a properly rated, protected, and sized power circuit to avoid electrical overload.
●Always plug into a grounded outlet.
●Do not under any circumstances, cut or remove the third (ground) prong from the power cord.
●When installing or moving the appliance, be careful not to pinch, crush, or damage the power
cord.
●Plug in the power plug properly.
●Do not modify or extend the power cord.
●Do not start/stop operation by plugging/unplugging the power cord.
●If the cord/plug is damaged, have it replaced by an authorized service person using authorized
replacement parts.
●Use a dedicated circuit.
●Do not disassemble or modify the product.
●Adhere to all industry recommended safety procedures including the use of long-sleeved gloves
and safety glasses.
●Use care when unpacking and installing. The edges of the product may be sharp.
●Disconnect the power cord or circuit breaker before installing or servicing the appliance.
●Keep packaging materials out of the reach of children. These materials can pose a suffocation
risk to children.
●Store and install the product where it will not be exposed to temperatures below freezing or
exposed to outdoor weather conditions.
●Do not store or use gasoline or other ammable vapors and liquids in the vicinity of this or any
other appliance.
OPERATION
●Use this appliance only for its intended purpose.
●Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled,
or has missing or broken parts, including a damaged cord or plug.
●Repair or immediately replace all power cords that have become frayed or otherwise damaged.
Do not use a cord that shows cracks or abrasion damage along its length or at either end.
●Do not run cord under carpets or mats where it could be stepped on and damaged.
●Keep the cord out from under heavy objects like tables or chairs.
●Do not place the power cord near a heat source.
●Do not use an adaptor or plug the product into a shared outlet.
●Do not tamper with controls.
●If you detect a strange sound, a chemical or burning smell, or smoke coming from the appliance,
unplug it immediately, and contact an LG Electronics Customer Information Center.
●Never unplug the appliance by pulling on the power cord. Always grip the plug rmly and pull
straight out from the outlet.
●Do not grasp the power cord or touch the appliance controls with wet hands.

ENGLISH
5
SAFETY INSTRUCTIONS
●If water enters the product, turn off the power at the main circuit, then unplug the product and call
for service.
●If the product has been submerged, contact an LG Electronics Customer Information Center for
instructions before resuming use.
●Unplug the product when unused for long periods.
●Unplug the product before cleaning.
●In the event of a gas leak (propane gas, etc.) do not operate this or any other appliance. Open a
window or door to ventilate the area immediately.
●This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning the use of the appliance by a person responsible for
their safety.
●The interior of the product must only be cleaned by an authorized service center or a dealer.
●Do not use solvent-based detergent on the product. Doing so can cause corrosion or damage,
product failure, electrical shock, or re.
GROUNDING INSTRUCTIONS
●The power cord of this appliance is equipped with a three-prong (grounding) plug. Use this with
a standard three-slot (grounding) wall power outlet to minimize the hazard of electric shock. The
customer should have the wall receptacle and circuit checked by a qualied electrician to make
sure the receptacle is properly grounded. DO NOT CUT OR REMOVE THE THIRD (GROUND)
PRONG FROM THE POWER PLUG.
- Situations when the appliance will be disconnected occasionally; Because of potential safety
hazards, we strongly discourage the use of an adapter plug. However, if you wish to use an
adapter, a TEMPORARY CONNECTION may be made. Use UL-listed adapter, available from
most local hardware stores.
The large slot in the adapter must be aligned with the large slot in the receptacle to assure a
proper polarity connection.
●Attaching the adapter ground terminal to the wall receptacle cover screw does not ground the
appliance unless the cover screw is metal, and not insulated, and the wall receptacle is grounded
through the house wiring. The customer should have the circuit checked by a qualied electrician
to make sure the receptacle is properly grounded.
●Disconnect the power cord from the adapter, using one hand on each. Otherwise, the adapter
ground terminal might break. Do not use the appliance with a broken adapter plug.
- Situations when the appliance will be disconnected often; Do not use an adapter plug in these
situations. Unplugging the power cord frequently can lead to an eventual breakage of the
ground terminal. The wall power outlet should be replaced by a three-slot (grounding) outlet
instead.

6SAFETY INSTRUCTIONS
CAUTION
To reduce the risk of minor or moderate injury to persons, malfunction, or
damage to the product or property when using this product, follow basic
precautions, including the following:
INSTALLATION
●Take care when installing the product that exhaust or condensation does not damage nearby
property.
●Follow installation instructions exactly to avoid excessive vibration or water leakage.
OPERATION
●This appliance is not intended for use as a precision refrigeration system. Do not use it for special
purposes such as maintaining pets, food, precision machinery, or art objects.
●When installing or moving the appliance, be careful not to pinch, crush, or damage the power
cord.
●Make sure the air inlet and outlet are free from obstructions.
●Use a soft cloth to clean the appliance. Do not use waxes, thinners, or harsh detergents.
●Do not step on or place heavy objects on top of the appliance.
●Do not drink water drained from the appliance.
are used simultaneously.
●Remove the batteries if the remote control is not to be used for an extended period of time.
●Never mix different types of batteries, or old and new batteries for the remote control.
f with clean water.
consult a doctor.
●Do not recharge or disassemble the batteries.
MAINTENANCE
●Never use strong cleaning agents or solvents when cleaning the air conditioner or spray water.
Use a smooth cloth.
Do not expose people, animals, or plants to the cold or hot wind from the air conditioner for
extended periods of time.

ENGLISH
7
SAFETY INSTRUCTIONS
REFRIGERANT (FOR R32 ONLY)
WARNING
●Do not use means to accelerate the defrosting process or to clean, other than those
recommended by the manufacturer.
●The appliance shall be stored in a room without continuously operating ignition sources (for
example: open ames, an operating gas appliance or an operating electric heater).
●Do not pierce or burn. Be aware that ammable refrigerants may not contain an odor.
CAUTION
●This unit contains ammable refrigerant and has special safety precautions not normally
associated with older units. Please follow all precautions and advisories.
- Use caution while handling and prevent damage to unit. Do not put any holes into product for
any reason. This can cause damage to product and prevent unit from cooling.
- Maintenance and cleaning of unit should be performed by trained personnel. Failure to properly
clean unit can result in damage to the refrigeration system and or the electrical system.
- Make certain that all the air circulation/ventilation openings are free from obstruction.
- Service should only be performed by technicians properly trained and certied in the use of
ammable refrigerants. Any service performed by unauthorized servicers/individuals will void all
warranties.
- When storing the appliance, do not put in a room with any open ame appliances, such as gas
water heaters or furnaces. Also keep away from electric heaters. Damaged units should be
repaired before storage.
SAVE THESE INSTRUCTIONS

8PRODUCT OVERVIEW
PRODUCT OVERVIEW
Exterior Parts Interior Parts
1Evaporator
2Air Guide
3
4
Shround
5
Compressor
6
Condenser
7
Base Pan
Power Cord
1Control Panel
2Remote Controller
3Air Filter
4
5
6Front Grille
7
8Cabinet
Air Outlet
1
2
3
4
5
6
7
7
8
6
1
4
5
3 2

ENGLISH
9
INSTALLATION
INSTALLATION
Electrical Data
Power cord may include a current interrupter
device. TEST and RESET buttons are provided
on the plug case. The device should be tested on
TEST button
and then the RESET button. If the TEST button
does not trip or if the RESET button will not stay
engaged, discontinue use of the air conditioner
WARNING
●This appliance should be installed in
accordance with the National Electrical
Code.
●Use of extension cords could cause serious
injury or death.
- Do not use an extension cord with this
window air conditioner.
- Do not use surge protectors or multi-outlet
adapters with this window air conditioner.
●Never push the TEST button during
operation. Doing so can damage the plug.
- Do not remove, modify, or immerse this
plug. If this device trips, the cause should
be corrected before further use.
CAUTION
●The conductors inside this cord are
surrounded by shields, which monitor
leakage current. These shields are not
grounded. Periodically examine the cord
for any damage. Do not use this product
in the event the shields become exposed.
Avoid shock hazard. This unit cannot be
user-serviced. Do not open the tamper-
resistant sealed portion. All warranties and
performance will be voided. This unit is not
intended to be used as an ON/OFF switch.
Use Wall Receptacle Power Supply
Use 15 A, time
delay fuse or 15 A,
circuit breaker.
Standard 120 V, 3-wire
grounding receptacle rated
15 A / 120 VAC / 60 Hz
for 120 V
RESET
TEST

10 INSTALLATION
Installation Overview
Accessories
Type 'A' Screws
(11)
Type 'B' Screws
(5)
Tools Needed
Phillips-head
screwdriver Flat-blade screwdriver Adjustable wrench Level
Tape measure Cutting knife Scissors Pencil
Heatproof foam (2)
(Adhesive backed)
Right curtain
panel
Left curtain
panel
Foam strip
(Non-adhesive)
Foam-PE (2)
(Adhesive backed)
L bracket (3)
Support bracket

ENGLISH
11
INSTALLATION
Window Requirements
●This unit is designed for installation in standard
double hung windows with actual opening
widths from 22" to 36".
The top and bottom window sashes must open
13" from the bottom of the upper sash to the
inside sill.
22" to 36"
13" min
Preparation of Chassis
1Insert the guide panels into the upper and
bottom guide.
Fasten the curtains to the unit with 4 type A
screws on each side.
Left Guide
Panel Right Guide
Panel
Upper Guide
Bottom Guide
Use a long screwdriver and installing
the screws will be easier.
NOTE
●
Indoors
Inner Sill
Outer Sill
Storm
Window Frame
Wood Strip Mounted
on Top of Inner Sill ¾"
Clearance
Wood Strip for
L bracket
L Bracket
Outdoors
Foam-PE
(Adhesive backed)
2Cut the window sash seals to the proper
length. Peel off the backing and attach the
Foam-PE(Adhesive backed) to the
underside of the window sash and bottom
of window frame.
NOTE
●This prodcut is a WINDOW AIR CONDITIONER.
As such, a standard single-hung or double-hung
window is required for proper installation.
No-window installations, including using sleeves,
holes in walls, and other installations are not
recommended.
1If a storm window presents interference,
fasten a 2” wide wood strip to the inner
window sill across the full width of the sill.
The wood strip should be thick enough to
raise the height of the window sill so that
the unit can be installed without interference
by the storm window frame.
2(See drawing.) The top of the wood strip on
the inside sill should be approximately ¾”
higher than the storm window frame or wood
strip on the outside sill to help condensation
to drain properly to the outside.
3If necessary, install a second wood strip
(same thickness as first strip) in the center
of sill flush against the back off the inner sill.
This will raise the L bracket as shown in
the drawing.
Clearance
Proper clearance enhances the cooling efficiency
of the product.

12 INSTALLATION
Unit Installation
1Set the air conditioner in the window so that
is centered. Place the air conditioner so that
front edge of the bottom guide is against the
back edge of the sill.
Bring the window down so that the front edge
of the upper guide is in front of the window.
Make sure that air conditioner is level or
tilting slightly to the outside.
2Extend the guide panels to fill the window
opening using 4 Type B screws to secure
them.
3Cut the foam strip to the window width. Stuff
the foam strip between the glass and the
window to prevent air and insects from
getting into the room. Fasten the L bracket
using a Type A screw.
CAUTION
● During the following step, hold unit firmly until
window sash is lowered to top channel behind
side panel frames. Personal injury or property
damage may result if unit falls from window.
CAUTION
● To prevent broken glass or damage to windows,
on vinyl or other similarly constructed windows,
attach the window locking beacket to the
window side jamb with one Type A screw.
Window Frame
Upper Guide
L Bracket
Bottom Guide
Seal About ¼"
L Bracket
Screws
(Type B)
Screw
(Type A)
Foam Strip
4Install the L bracket behind the inner
window sill, with short side of bracket as
shown. Use the 2 Type A screws provided.
The bracket helps to hold unit securely in
place. Be sure to place bracket edge flush
against back of inner sill.
NOTE
●
L Bracket
Outer Sill
Inner Sill
Center Line
3Open the window and mark center line
on the center of the inner sill.
Room Side
Inner Sill Center Line

ENGLISH
13
INSTALLATION
5
Screw
Support Bracket
(Type B)
4Remove the screw form the right side of
cabinet. Fasten the support bracket using a
removed from the air conditioner cabinet.
Attach the support bracket to the inner
window sill with a Type B screw.
NOTE
●See the 'Electrical Data' section for
information on attaching the power cord
to an electrical outlet.
NOTE
●Fasten the remaining L bracket to the outer
window sash with 1 type A screw as shown.
NOTE
●
Vinyl
Wood
Cut the adhesive-backed heatproof foam
to match the size of the curtain panels.
Remove the backing from the heatproof
foam and attach it to the curtain panels.
Heatproof Foam
Heatproof foam improves the cooling
capability of the air conditioner.

14 OPERATION
OPERATION
Control Panel and Remote Control
Remote Control
5Wi-Fi
Enables connection of the air conditioner to
the home Wi-Fi.
1234
5 6
7
1Power
Press to turn the air conditioner ON or OFF.
2Fan Speed
Press to set the fan speed to Low (F1),
Medium (F2), or High (F3).
3Delay ON/OFF Timer
Delay ON - When the air conditioner is off,
set it to automatically turn on from 1 to 24
hours later, at its previous mode and fan
settings.
Delay OFF - When the air conditioner is on,
set it to automatically turn off from 1 to 24
hours later.
NOTE
●Each press of the Timer button advances
the timer by 1 hour. After the last press
the display returns to the temperature
setting.
4Operation Mode
Press the Mode button to cycle between
4 types of air conditioner operation:
Energy Saver / Cool / Fan / Dry.
Cool
Fan - In this mode the fan circulates air
but the compressor does not run. Use
the Fan Speed button to set fan speed to
High, Medium or Low. In this mode, you
cannot adjust the set temperature.
Dry - This mode is ideal for rainy and
damp days to dehumidify the room rather
removed from the room by the combination
of compressor operation and the fan speed
off once the set temperature is reached.
Fan speed cannot be adjusted in Dry mode.
1
4
2
7
3
- This mode is ideal on hot days to
cool and dehumidify the room quickly. Use
the Temp buttons to set the desired
room temperature and use the Fan Speed
button to set the desired fan circulation
speed.
Energy Saver - In this mode the
compressor and fan turn off when the set
temperature is achieved. Approximately
every 3 minutes the fan turns on to allow
the unit sensor to accurately determine if
more cooling is needed.

ENGLISH
15
OPERATION
Wireless Remote Control
Inserting Battery
1Push out the cover on the back of the
remote control with your thumb.
2Pay attention to polarity and insert one
new AAA 1.5 V battery.
3Reattach the cover.
NOTE
●One new battery is supplied with the air
conditioner for use in the remote control.
●Do not use a rechargeable battery. Make sure
that the battery is new.
●In order to prevent discharge, remove the
battery from the remote control if the air
conditioner is not going to be used for an
extended period of time.
●Keep the remote control away from extremely
hot or humid places.
●To maintain optimal operation of the remote
control, the remote sensor should not be
exposed to direct sunlight.
6Clean Filter
The Clean Filter LED lights up to notify you
Temp and
together on the control panel to turn off the
Clean Filter light.
NOTE
●
control panel, not the remote control.
●This feature is a reminder to clean the air
light turns on after 250 hours of operation.
7Temperature Control
The thermostat monitors room temperature
to maintain the desired temperature. The
thermostat can be set between 60 °F–86 °F
(16 °C–30 °C). Press or arrows to
increase or decrease temperature setting.
NOTE
●Auto Restart:If the air conditioner turns off due
to a power outage, it will restart automatically
once the power is restored, with the same
settings as were set before the unit turned off.
●Energy Saver: The unit defaults to the Energy
Saver mode each time the unit is switched on
except in Fan mode or when power is restored
after an electrical power outage.
●The remote control will not function properly if
the AC infrared sensor is exposed to direct light
or if there are obstacles between the remote
controller and the air conditioner.

16 OPERATION
Air Direction
Ventilation
Push the ventilation lever in to the closed position
to maintain the best cooling performance. Pull
the ventilation lever out to open the vent and
draw fresh air into the room.
of the air conditioner’s louvers.
Direction
levers of the vertical louvers to the left or right.
Direction
up or down.
NOTE
●When the weather is extremely hot, the unit
may turn off automatically to protect the
compressor.
Additional Features
Slinger Fan
This air conditioner is equipped with a slinger
fan. (See drawing.)
The fan’s outer ring picks up the condensed
water from the base pan if the water level gets
high enough. The water is then picked up by the
fan and expelled through the condenser, making
Ring
Close Open

ENGLISH
17
SMART FUNCTIONS
SMART FUNCTIONS
•For appliances with the logo
1Check the distance between the appliance
and the wireless router (Wi-Fi network).
•If the distance between the appliance and
the wireless router is too far, the signal
strength becomes weak. It may take a
long time to register or installation may
fail.
2Turn off the Mobile data or Cellular Data
on your smartphone.
•For iPhones, turn data off by going to
Settings → Cellular → Cellular Data.
3Connect your smartphone to the wireless
router.
NOTE
•To verify the Wi-Fi connection, check that
Wi-Fi icon on the control panel is lit.
•The appliance supports 2.4 GHz Wi-Fi
networks only. To check your network
frequency, contact your Internet service
provider or refer to your wireless router
manual.
•LG SmartThinQ is not responsible for any
network connection problems or any faults,
malfunctions, or errors caused by network
connection.
•If the appliance is having trouble connecting to
the Wi-Fi network, it may be too far from the
router. Purchase a Wi-Fi repeater (range
extender) to improve the Wi-Fi signal strength.
•The Wi-Fi connection may not connect or may
be interrupted because of the home network
environment.
•The network connection may not work
properly depending on the Internet service
provider.
•The surrounding wireless environment can
make the wireless network service run slowly.
•The appliance cannot be registered due to
problems with the wireless signal
transmission. Unplug the appliance and wait
about a minute before trying again.
•If the firewall on your wireless router is
enabled, disable the firewall or add an
exception to it.
•The wireless network name (SSID) should be
a combination of English letters and numbers.
(Do not use special characters.)
•Smartphone user interface (UI) may vary
depending on the mobile operating system
(OS) and the manufacturer.
•If the security protocol of the router is set to
WEP, you may fail to set up the network.
Please change it to other security protocols
(WPA2 is recommended) and register the
product again.
Using LG SmartThinQ
Application
Things to check before using LG
SmartThinQ

18 SMART FUNCTIONS
Wireless LAN Module
Specications
Model LCW-003
Frequency
Range 2412 to 2462 MHz
Output
Power
(Max)
IEEE 802.11 b : 17.56 dBm
IEEE 802.11 g : 25.53 dBm
IEEE 802.11 n : 25.29 dBm
Wi-Fi Function
•For appliances with the logo
Communicate with the appliance from a smart
phone using the convenient smart features.
Settings
Allows you to set various options on the
appliance and in the application.
NOTE
●If you change your wireless router, Internet
service provider，or password, delete the
registered appliance from the LG SmartThinQ
application and register it again.
●The application is subject to change for
●Functions may vary by model.
appliance improvement purposes without notice
to users．
Installing LG SmartThinQ
Search for the LG SmartThinQ application from
the Google Play Store or Apple App Store on a
smart phone. Follow instructions to download
and install the application.

ENGLISH
19
SMART FUNCTIONS
FCC Notice (For transmitter module
contained in this product)
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses, and can radiate radio frequency energy
and, if not installed and used in accordance with
the instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is encouraged
to try to correct the interference by one or more
of the following measures:
●Reorient or relocate the receiving antenna.
●Increase the separation between the equipment
and the receiver.
●Connect the equipment to an outlet on a circuit
different from that to which the receiver is
connected.
●Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
1) This device may not cause harmful
interference and
2) This device must accept any interference
received, including interference that may
cause undesired operation of the device.
Any changes or modications in construction of
this device which are not expressly approved by
the party responsible for compliance could void
the user’s authority to operate the equipment.
FCC RF Radiation Exposure
Statement
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This transmitter must not be co-
located or operating in conjunction with any other
antenna or transmitter.
This equipment should be installed and operated
with a minimum distance of 20 cm (7.8 inches)
between the antenna and your body. Users must
follow the specic operating instructions for
satisfying RF exposure compliance.
Open Source Software Notice
Information
To obtain the source code under GPL, LGPL,
MPL, and other open source licenses, that is
contained in this product, please visit http://
opensource.lge.com. In addition to the source
code, all referred license terms, warranty
disclaimers and copyright notices are available
for download.
LG Electronics will also provide open source
code to you on CD-ROM for a charge covering
the cost of performing such distribution (such as
the cost of media, shipping, and handling) upon
email request to [email protected]. This
offer is valid for a period of three years after our
last shipment of this product. This offer is valid to
anyone in receipt of this information.