Life Gear 40120 User manual

cv: mentor I, magnetic/TREADMILL
ITEM NO.: 40120
OWNER’S MANUAL
IMPORTANT: Read all instructions carefully before using this product. Retain this
owner’s manual for future reference.
The specifications of this product may vary from this photo, subject to change without notice.
2014, Aug.

1
TABLE OF CONTENTS
WARRANTY ------------------------------------------------------------------------------- 2
IMPORTANT SAFETY INSTRUCTIONS ------------------------------------------- 3
OVERVIEW DRAWING ----------------------------------------------------------------- 4
PARTS LIST ------------------------------------------------------------------------------- 5
HARDWARE LIST ----------------------------------------------------------------------- 6
TOOLS -------------------------------------------------------------------------------------- 6
ASSEMBLY INSTRUCTIONS --------------------------------------------------------- 7
OPERATING THE COMPUTER ------------------------------------------------------ 12
LIFTING UP AND SETTING DOWN THE TREADMILL ------------------------ 14
ADJUSTMENTS -------------------------------------------------------------------------- 15
LUBRICATION ----------------------------------------------------------------------------- 16
MAINTENANCE -------------------------------------------------------------------------- 17
TROUBLESHOOTING ------------------------------------------------------------------ 17
WARM UP AND COOL DOWN ROUTINE ----------------------------------------- 18

2
ONE YEAR LIMITED WARRANTY
LifeGear Inc. warrants to the original purchaser that this product is free from defects in
material and workmanship when used for the purpose intended, under the conditions that it
has been installed and operated in accordance with LifeGear's Owner's Manual. LifeGear's
obligation under this warranty is limited to replacing or repairing free of charge, any parts
which may prove to be defective under normal home use. This warranty does not include
any damage caused by improper operation, misuse or commercial application.
From the date of purchase, the frame is warranted to be free from defects for 1 (one) year.
This warranty is offered only to the original owner and is not transferable. Proof of
purchase is required.
When ordering replacement parts please have the following information ready:
1. Owner's Manual
2. Model Number
3. Description of Parts
4. Part Number
5. Date of Purchase

3
IMPORTANT SAFETY INSTRUCTIONS
Basic precautions should always be followed, including the following safety
instructions when using this magnetic treadmill. Read all instructions before using
this magnetic treadmill.
1. Check every part of the equipment before exercise. If there is any defective
component, replace it immediately; keep the equipment out of use until repair.
2. Make sure all parts, bolts and nuts are well assembled and locked before exercise.
3. Never insert any object into any opening.
4. Never operate this magnetic treadmill if it is not working properly. If it has been
dropped or damaged, or been exposed to water, return the appliance to a service center
for examination and repair.
5. Do not attempt any maintenance or adjustments other than those described in this
manual. Should any problems arise, discontinue use and consult your local dealer.
6. Wear comfortable and suitable clothing when using the magnetic treadmill. Do not use
the magnetic treadmill barefoot, in only socks or in sandals, always wear athletic shoes.
Never wear loose clothing because it could run the risk of getting caught in the magnetic
treadmill.
7. Keep children and pets away from the equipment while in use.
8. Do not use the magnetic treadmill outdoors. This magnetic treadmill is for household
use only.
9. Only one person should be on the magnetic treadmill while in use.
10. Keep the magnetic treadmill on a solid, level surface with the minimum safety area
clearance of 2000mm x 1000mm around the unit. Be sure the area around the
magnetic treadmill remains clear during use and has adequate clearance.
11. Hold the handlebar with your hands when starting or stopping exercise and increasing
or decreasing the speed.
12. If feeling chest pains, nausea, dizziness, or shortness of breath, you should stop
exercising immediately and consult your physician before continuing.
13. The maximum weight capacity for this product is 110kgs.
WARNING: Before beginning any exercise program consult your physician.
This is especially important for the people who are over 35 years old or who have
pre-existing health problems. Read all instructions before using any fitness
equipment.
CAUTION: Read all instructions carefully before operating this product.
Retain this Owner’s Manual for future reference.

4
OVERVIEW DRAWING
1
2
3
4
5
6
7
10
10
11
11
12
12
13
13
16
16
14
14
15
15
17
17
18
18
19
19
20
20
21
21
22
22
23
23
24
24
25
25
26
26
30
30
31
31
15
15
14
14
28
28
64
64
34
34
12
12
35
35
35
35
12
12
34
34
36
36
38
38
37
37
40
40
41
41
42
42
43
43
44
44
45
45
46
46
12
12
35
35
18
18
50
50
51
51
12
12
13
13
53
53
55
55
54
54
56
56
57
57
29
29
60
60
59
59
61
61
31
31
62
62
8
13
13
12
12
46
46
13
13
12
12
49
49
48
48
47
47 9
63
63
52
52
40
40
41
41
42
42
35
35
46
46
45
45
44
44
12
12
13
13
18
18
32
32
33
33
31
31
19
19
17
17
27
27
4
28
28
27
27
60
60
61
61
37
37
39
39
58
58
58
58
58
58

5
PARTS LIST
No. Description Qty No. Description Qty
001 Connection Support Frame 1 033 Bolt M6x25 4
002 Right Handlebar Support Frame 1 034 Bolt M8x15 2
003 Left Handlebar Support Frame 1 035 Sleeve Ø18xØ12x7 4
004 Handlebar Support Tube 2 036 Running Deck 1024x438x12 1
005 Handlebar 1 037 Side Rail 976x30x2 2
006 Main Frame 1 038 Running Belt 2333x340x1.3 1
007 Incline Adjustment Frame 1 039 Bolt M5x25 8
008 Safety Tube A 1 040 Rear Roller Adjustment Bolt M6x60 2
009 Safety Tube B 1 041 Washer Ø6xØ12x1.5 2
010 Bolt M8x35 2 042 Rear Roller Adjustment Bolt Plate 2
011 Wheel Ø50xØ8x20 2 043 Rear Roller Ø42x425 1
012 Washer Ø8xØ16x2.0 9 044 Incline Adjustment Frame End Cap
Ø25x27
2
013 Nylon Nut M8 7 045 Locking Pin Ø8x33 2
014 Washer Ø10xØ20x2.0 4 046 Bolt M8x42 3
015 Nylon Nut M10 4 047 Spring Knob M16 1
016 Hexagon Head Bolt M10x40 4 048 Hexagon Head Bolt M8x75 1
017 Hexagon Head Bolt M12x65 2 049 Nut M8 2
018 End Cap (25x50) 4 050 Hexagon Head Bolt M8x70 1
019 Washer Ø12xØ24x2.0 2 051 Magnet Bracket 1
020 Round Cap Ø32 2 052 Square Bushing 1
021 Tension Control Knob 1 053 Square End Cap (25x25) 1
022 Washer Ø5xØ10x1.0 1 054 Hexagon Head Bolt M5x25 1
023 Bolt M5x25 1 055 Nut M5 1
024 Bolt M6x35 1 056 Sensor with Wire 100mm 1
025 Computer XLG-605 1 057 Screw ST2.9x9.5 2
026 Bolt M5x15 2 058 Sensor Wire I (L=500mm) 3
027 Foam Grip Ø38xØ32x450 2 059 Wire Plug Ø12x10 1
028 Hand Pulse Sensor with Wire 2 060 Sensor Wire II (L=650mm) 1
029 Wire Plug Ø12xØ25x9 1 061 Sensor Wire III (L=700mm) 1
030 Screw ST4.2x25 2 062 Spring Ø10x15x1.0 1
031 Bolt M6x15 6 063 Square End Cap (20x20) 1
032 Rubber Pad Ø33xØ38x16 4 064 Front Roller Ø42xØ160x425 1

6
HARDWARE LIST
TOOLS
Allen Wrench #5
1 PC
Multi Hex Tool S13, S17, S19
2 PCS
Multi Hex Tool with Phillips Screwdriver
1 PC
(14) Washer
Ø10xØ20x2.0
4 PCS
(15) Nylon Nut M10
4 PCS
(16) Hexagon Head Bolt
M10x40
4 PCS
(17) Hexagon Head Bolt
M12x65
2 PCS
(19) Washer
Ø12xØ24x2.0
2 PCS
(24) Bolt M6x35
1 PC
(31) Bolt M6x15
6 PCS

7
ASSEMBLY INSTRUCTIONS
Step 1
Attach the Connection Support Frame (1) onto the Right/Left Handlebar Support Frames
(2, 3) with four Ø10xØ20x2.0 Washers (14), four M10 Nylon Nuts (15), and four M10x40
Hexagon Head Bolts (16). Tension bolts and nuts partially with two Multi Hex Tools
provided.
NOTE: DO NOT FULLY TIGHTEN HARDWARE IN STEP 1 UNTIL STEP 4 IS
COMPLETED.
Hardware:
Tool:
2 Multi Hex Tools S13, S17, S19
3
14
15
15
14
1
16
16
2
(14) Washer
Ø10xØ20x2.0
4 PCS
(15) Nylon Nut M10
4 PCS
(16) Hexagon Head Bolt
M10x40
4 PCS

8
Step 2
Attach the Main Frame (6) onto the Right/Left Handlebar Support Frames (2, 3) with two
M12x65 Hexagon Head Bolts (17) and two Ø12xØ24x2.0 Washers (19). Tighten bolts with
the Multi Hex Tool provided.
Connect the Sensor Wire (56) from the Main Frame (6) to the Sensor Wire III (61) from the
Left Handlebar Support Frame (3).
NOTE: It is recommended that you always use the aid of a second person when
assembling the treadmill.
DO NOT FULLY TIGHTEN HARDWARE IN STEP 2 UNTIL STEP 4 IS COMPLETED.
Hardware:
Tool:
1 Multi Hex Tool S13, S17, S19
2
3
1
6
19
17
19
17
61
56
(17) Hexagon Head Bolt
M12x65
2 PCS
(19) Washer
Ø12xØ24x2.0
2 PCS

9
Step 3
Connect the Sensor Wire II (60) from the Handlebar Support Tube (4) to the Sensor Wire III
(61) from the Left Handlebar Support Frame (3). Then install the Handlebar Support Tube
(4) to the Left Handlebar Support Frame (3) by inserting the Handlebar Support Tube
(4) into the Left Handlebar Support Frame (3), using two M6x15 Bolts (31). Tighten bolts
with the #5 Allen Wrench.
Install the other Handlebar Support Tube (4) to the Right Handlebar Support Frame (2) by
inserting the Handlebar Support Tube (4) into the Right Handlebar Support Frame (2), using
two M6x15 Bolts (31). Tighten bolts with the #5 Allen Wrench.
IMPORTANT: While sliding the Handlebar Support Tube (4) into the Left Handlebar
Support Frame (3), make sure the wires are completely inside the Left Handlebar
Support Frame (3) and not outside of the frame perimeters before pushing the two
tubes together. Pay attention the wires are safely inside as you may otherwise pinch
the wires when sealing.
Tool:
1 Allen Wrench #5
1 Multi Hex Tool with Phillips Screwdriver
2
3
4
4
5
31
31
31
31
24
24
25
25
26
26
31
31
31
31
61
61
60
60
58
58
28
28
28
28
58
58
60
60
58
58