Life Span Relay User manual

NOTE: This manual may be subject to updates or changes. Up to date manuals are available through our website at www.lifespanfitness.com.au
Product may vary slightly from the item pictured due to model upgrades
Read all instructions carefully before using this product. Retain this owner’s manual for
future reference.
RELAY OWNER’S MANUAL

2
RELAY
TABLE OF CONTENTS
1. IMPORTANT SAFETY INSTRUCTIONS 3
2. IMPORTANT ELECTRICAL INFORMATION 4
3. IMPORTANT OPERATING INSTRUCTIONS 5
4. ASSEMBLY INSTRUCTIONS 6
5. FOLDING INSTRUCTIONS 10
6. OPERATION GUIDE 11
7. EXERCISE GUIDE 15
8. MAINTENANCE INSTRUCTIONS 17
9. EXPLODED DIAGRAM 25
10. PARTS LIST 26
11. TROUBLE SHOOTING GUIDE 27
12. WARRANTY 30

3
RELAY
1. IMPORTANT SAFETY INSTRUCTIONS
WARNING - Read all instructions before using this treadmill.
It is important your treadmill receives regular maintenance to prolong its useful life. Failing to
regularly maintain your treadmill may void your warranty.
Danger –To reduce the risk of electric shock disconnect your treadmill from the electrical outlet prior to
cleaning and/or service work.
DO NOT USE AN EXTENSION CORD: DO NOT ATTEMPT TO DISABLE THE GROUNDED PLUG BY
USING IMPROPER ADAPTERS OR IN ANY WAY MODIFY THE CORD SET.
Install the treadmill on a flat level surface with access to a 220-240 volt (50/60Hz), grounded outlet.
Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both carpet and
treadmill may result.
Do not block the rear of the treadmill. Provide a minimum of 1 metre clearance between the rear of
the treadmill and any fixed object.
Place your unit on a solid, level surface when in use
When running, make sure the plastic clip is fastened on your clothing. It is for your safety, should
you fall or move too far back on the treadmill.
Keep hands away from all moving parts.
Never operate the treadmill if it has a damaged power cord or plug. When damaged, these must be
replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a
hazard.
Keep the cord away from heated surfaces.
Do not operate where aerosol spray products are being used or where oxygen is being
administered. Sparks from the motor may ignite a highly gaseous environment.
Never drop or insert any object into any openings.

4
RELAY
The treadmill is intended for in-home use only and not suitable for long term running.
To disconnect, turn all controls to the off position, remove the safety key, and then remove the plug
from the outlet.
The pulse sensors are not medical devices. Various factors, including the user’s movement, may
affect the accuracy of heart rate readings. The pulse sensors are intended only as exercise aids in
determining heart rate trends in general.
Use the handrails provided; they are for your safety.
Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on your
treadmill. Quality athletic shoes are recommended to avoid leg fatigue.
Before undertaking any type of exercise program, it is recommended that you consult a doctor.
Injuries to health may result from incorrect or excessive training.
This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
WARNING heat rate monitoring systems may be inaccurate. If you feel faint stop exercising
immediately.
Children should not be allowed on or around the equipment, even when not in use.
Children should be supervised to ensure that they do not play with this machine
Loose-fitting clothing or jewellery that could become an entanglement hazard should not be worn.
Training shoes should be worn when using the equipment.
Equipment must be used on a level and stable surface.
All fixings should be checked before the equipment is used.
All literature relating to the use of the equipment should be retained for future reference.
Allowed operating temperature: 5-40°C
Remove the safety key after use to prevent unauthorized treadmill operation.

5
RELAY
2. IMPORTANT ELECTRICAL INFORMATION
WARNING!
Route the power cord away from any moving part of the treadmill including the elevation mechanism
and transport wheels.
NEVER remove any cover without first disconnecting AC power.
NEVER expose this treadmill to rain or moisture. This treadmill is not designed for use outdoors,
near a pool, or in any other high humidity environment.
This is a high-power item; please do not share the same outlet with other high power machines such
as, fridges, air conditioning etc. Please choose an outlet exclusively for the machine and make sure
the fuse is 10A.
3. IMPORTANT OPERATING INSTRUCTIONS
Understand that changes in speed and incline do not occur immediately. Set your desired speed on
the computer console and release the adjustment key. The computer will obey the command
gradually.
Use caution while participating in other activities while walking on your treadmill, such as watching
television, reading, etc. These distractions may cause you to lose balance or stray from walking in
the centre of the belt; which may result in serious injury.
In order to prevent losing balance and suffering unexpected injury, never mount or dismount the
treadmill while the belt is moving. This unit starts with at a very low speed. Simply standing on the
belt during slow acceleration is proper after you have learned to operate this machine.
Always hold on to handrail while making control changes.
A safety key is provided with this machine. Remove the safety key will stop the walking belt
immediately; the treadmill will shut off automatically. Inserting the safety key will reset the display.
Do not use excessive pressure on console control keys. They are precision set to function properly
with little finger pressure.

6
RELAY
Replace any defective components immediately. The machine must be kept out of use until
repaired.
4. ASSEMBLY INSTRUCTIONS
PARTS LIST
ASSEMBLY TOOLS:
5# Allen Wrench 5mm 1pc
#6 Allen Wrench 6mm 1pc
Wrench s/screw Driver S=13, 14, 15 1 pcs
Notice: Do not get through power before complete assembly
No
DES.
Specification
Qty
No
DES.
Specification
Qty
1
Main frame
1
64
Lock washer
8
14
68
Bolt
ST4.2*19
4
73
Left back cover
1
07
#6 Allen wrench
5mm
1
74
Right back cover
1
12
#5 Allen wrench
5mm
1
04
Safety key
1
53
Bolt
M8*45
4
61
wrench w/screw driver
S=13、14、15
1
51
Bolt
M8*16
8
80
MP3 Wire
1
08
Oil bottle
1

7
RELAY
STEP 1:
STEP 2:
1. Open the carton. Place the Main
Frame onto level ground.
1. Move the display so it matches the
position shown.
2. Screw in Bolt M8*16 (51) and Lock
washer (64) of Left Upright and Right
Uprights.
Note: Do not damage the computer wire
when folding the computer.
3. Lock the Computer frame to the Left
Upright and Right Uprights securely
using Bolt M8*16(51) and Lock washer
(64).

8
RELAY
STEP 3:
STEP 4:
1. Erect the Upright
Note: Support the uprights with your hands
to prevent them from falling down and
causing injury.
It is recommended that you do not fully
tighten all bolts until all pieces are in
position.
1. Attach the Left and Right Upright Tubes
(3) to the Main Frame (1). Using the 5#
Allen wrench (12), Bolts M8*45 (51) and
Lock washers (64).
2. Secure Left and Right Upright Tubes (3)
to the Main Frame (1) with Bolt M8*16
(53) and Lock washer (64).

9
RELAY
STEP 5:
STEP 6:
1. Using the wrench w/screw driver
(61), attach the Left back cover (73)
onto the base frame with
ST4.2*19(68).
2. Using the wrench w/screw driver
(61), attach the Right back cover (74)
onto the base frame with
ST4.2*19(68).
1. Place safety key (04) onto the
computer and start your exercise.

10
RELAY
5. FOLDING INSTRUCTIONS
Folding:
Unfolding:
Place your hand on position (A), then pull
up the base frame until you hear the click
sound emitted when the air pressure bar
(B) is locked into the round tube.
Whilst supporting position A with our
hand, gently push the marked area on the
air pressure bar with your foot.
The base frame will descend
automatically. If the frame does not move,
apply downwards pressure on position A
until it starts moving, and let go.
Please keep people and any pets away
from the machine during descent.
Video Tutorial Available at:
http://youtu.be/cP9NtFHfWlc
Lifespan Fitness Channel:
http://www.youtube.com/user/treadmillsvideos