Life Span STYLE User manual

Product may vary slightly from the item pictured due to model upgrades
Read all instructions carefully before using this product. Retain this owner’s manual for
future reference.
STYLE OWNER’S MANUAL

2
STYLE
TABLE OF CONTENTS
1. IMPORTANT SAFETY INSTRUCTIONS 3
2. IMPORTANT ELECTRICAL INFORMATION 4
3. IMPORTANT OPERATING INSTRUCTIONS 5
4. ASSEMBLY INSTRUCTIONS 6
5. FOLDING INSTRUCTIONS 9
6. GROUNDING METHODS 10
7. OPERATION GUIDE 11
8. EXERCISE GUIDE 16
9. MAINTENANCE INSTRUCTIONS 18
10. EXPLODED DIAGRAM 22
11. PARTS LIST 23
12. TROUBLE SHOOTING GUIDE 25
13. WARRANTY REGISTRATION 27

3
STYLE
1. IMPORTANT SAFETY INSTRUCTIONS
WARNING - Read all instructions before using this treadmill.
It is important your treadmill receives regular maintenance to prolong its useful life. Failing to
regularly maintain your treadmill may void your warranty.
Danger –To reduce the risk of electric shock disconnect your treadmill from the electrical outlet prior to
cleaning and/or service work.
DO NOT USE AN EXTENSION CORD: DO NOT ATTEMPT TO DISABLE THE GROUNDED PLUG BY
USING IMPROPER ADAPTERS OR IN ANY WAY MODIFY THE CORD SET.
Install the treadmill on a flat level surface with access to a 220-240 volt (50/60Hz), grounded outlet.
Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both carpet and
treadmill may result.
Do not block the rear of the treadmill. Provide a minimum of 1 metre clearance between the rear of
the treadmill and any fixed object.
Place your unit on a solid, level surface when in use
Never allow children on or near the treadmill.
When running, make sure the plastic clip is fastened on your clothing. It is for your safety, should
you fall or move too far back on the treadmill.
Keep hands away from all moving parts.
Never operate the treadmill if it has a damaged cord or plug.
Keep the cord away from heated surfaces.
Do not operate where aerosol spray products are being used or where oxygen is being administered.
Sparks from the motor may ignite a highly gaseous environment.
Never drop or insert any object into any openings.
The treadmill is intended for in-home use only and not suitable for long time running.

4
STYLE
To disconnect, turn all controls to the off position, remove the safety key, and then remove the plug
from the outlet.
The pulse sensors are not medical devices. Various factors, including the user’s movement, may
affect the accuracy of heart rate readings. The pulse sensors are intended only as exercise aids in
determining heart rate trends in general.
Use the handrails provided; they are for your safety.
Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on your
treadmill. Quality athletic shoes are recommended to avoid leg fatigue.
Allowed temperature: 5 to 40 degrees.
Remove the safety key after use to prevent unauthorized treadmill operation.
2. IMPORTANT ELECTRICAL INFORMATION
WARNING!
NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. Route the power
cord away from any moving part of the treadmill including the elevation mechanism and transport
wheels.
NEVER remove any cover without first disconnecting AC power.
NEVER expose this treadmill to rain or moisture. This treadmill is not designed for use outdoors,
near a pool, or in any other high humidity environment.

5
STYLE
3. IMPORTANT OPERATING INSTRUCTIONS
Be sure to read the entire manual before operating your machine.
Understand that changes in speed and incline do not occur immediately. Set your desired speed on
the computer console and release the adjustment key. The computer will obey the command
gradually.
Use caution while participating in other activities while walking on your treadmill, such as watching
television, reading, etc. These distractions may cause you to lose balance or stray from walking in
the centre of the belt; which may result in serious injury.
In order to prevent losing balance and suffering unexpected injury, NEVER mount or dismount the
treadmill while the belt is moving. This unit starts with at a very low speed. Simply standing on the
belt during slow acceleration is proper after you have learned to operate this machine.
Always hold on to handrail while making control changes.
A safety key is provided with this machine. Remove the safety key will stop the walking belt
immediately; the treadmill will shut off automatically. Inserting the safety key will reset the display.
Do not use excessive pressure on console control keys. They are precision set to function properly
with little finger pressure.

6
STYLE
4. ASSEMBLY INSTRUCTIONS
PART LIST
NO.
Description
Specification
Qty.
NO.
Description
Specification
Qty.
1
main frame
1
66
Lock washer
8
10
11
lock washer
S=13, 14, 15
1
12
5# Allen Wrench
5mm
1
46
Bolt
M8*16
10
59
Screw
ST4.2*12
4
40
Left handle bar cover L
1
41
Left handlebar cover R
1
25
Right handle bar cover L
1
32
Right handlebar cover R
1

7
STYLE
STEP 1:
STEP 2:
STEP 3:
1. Open the carton
2. Extract the parts listed above
3. Place the Main Frame (1) onto level
ground
1. Using the 5# Allen wrench, screw through
the bolt (46) to Lock washer (66), then
lock the Left upright (3) onto MAIN
FRAME (1)
Note: Support the Uprights with your hands to
prevent them falling down and causing injury.
1. Raise the Computer and Upright tubes in
the direction of the arrows.
Note: Whilst erecting the uprights, make sure the
upright does not press against and damage the
wires inside the upright tubes. Keep holding the
upright and computer by hand so they do not fall
down and cause injury

8
STYLE
STEP 4:
STEP 5:
STEP 6:
1. Using the 5# Allen wrench, screw through
the bolt (46) to Lock washer(66), then lock
the Right upright (4) onto MAIN FRAME (1)
Note: Support the Computer with your hands to
prevent it falling down and causing injury.
1. Use the 5# Allen wrench, screw through the
bolt (46) to Lock washer (66), then lock the
COMPUTER (64) onto R&L upright (3,4).
1. With ST4.2*12 Screw (59), insert the
UPRIGHT COVER (25, 32, 40, 41)onto
the L&R handle bar.

9
STYLE
5. FOLDING INSTRUCTIONS
Folding:
Unfolding:
Support position A with your hand, then pull
up the running board following the arrow
direction until you hear a clicking sound of
the cylinder (10) locking into the round
tube.
Support position A with your hand ,
depress position B of the air pressure
control bar, then the base frame will
descend automatically
A
10
A
B

10
STYLE
6. GROUNDING METHODS
This product must be grounded. In the event of malfunction or breakdown, grounding reduces the
risk of electric shock. This product is equipped with a cord with an equipment-grounding conductor
and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed
and grounded in accordance with all local codes and ordinances.
DANGER
Improper connection of the equipment-grounding conductor can result in risk of electric shock.
Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly
grounded.
Do not modify the plug provided with the product –if it will not fit the outlet; have a proper outlet installed by
a qualified electrician.
This product is for use on a nominal 240-volt circuit and has a grounding plug that looks like the plug
illustrated in sketch A in following figure. Ensure the product is connected to an outlet having the same
configuration as the plug. No adapter should be used with this product.

11
STYLE
7. OPERATION GUIDE
1. OVERVIEW
2. LCD WINDOW DISPLAY
1. Speed window: displays “P1-P15-U1-U3-FAT” when setting mode. The speed range is 1-22km/h
during workout.
2. INCL window: displays incline gradient, the range is 0-20.
3. Time window: displays workout time, the range is 0:00-99:59. When time reaches 99:59, the treadmill
will slow down until stop and show “End”. 0.5 seconds after “End” the treadmill will enter standby. The
Countdown setting is from the setting time until the timer reaches zero. Upon reaching “0”, the
computer will display “End” and will slow down to a stop. Then it will enter standby in 5 seconds
4. DIS window: shows the running distance. The range is from 0.00-99.9km. When distance reaches 99.9,
the treadmill will slow down until stop and show “End”. Upon reaching “0”, the computer will display
“End” and will slow down to a stop. Then it will enter standby in 5 seconds
5. PUL/CAL window: shows the heart rate and calories burnt. When displaying calorie value the range is

12
STYLE
from 0-999. When it reaches 999 the treadmill will slow down until a stop and show “End”. Countdown
is from the setting value to zero. Upon reaching “0”, the computer will display “End” and will slow down
to a stop. Then it will enter standby in 5 seconds. When you hold the hand pulse sensor the window will
show your heart rate. The range is from 50-200 beats per minute (Heart rate data is for reference
ONLY.)
3. BUTTON FUNCTIONS
1. “PROG”: when the treadmill is in standby mode, this button cycles through: “0:00”, “P1-P2-P3-P4-
P5-P6-P7-P8-P9-P10-P11-P12-FAT”.
a. “0:00” is the manual mode and default running mode.
b. “P1-P12” are built in programs
c. “FAT” is body fat test mode
2. “MODE”: mode selection button. Press this button to cycle through “0:00”, “15:00”, “1.0”, “50”
a. (“0:00” = manual mode, “15:00” = timer countdown mode, “1.0” = distance countdown mode,
“50” = calorie countdown mode)
b. You can adjust the value with the Speed+ & Speed- or INCL+ & INCL- buttons. Press
“START” to start your exercise after finishing setting the values.
3. “START”: begins workout. When the power is on and safety key correctly placed on the computer,
press this button to start the treadmill.
4. “STOP”: press button to stop the motor running
5. SPEED+\SPEED-: Increase or decrease speed when excising. Sets parameter when stopped.
6. “INCLINE+”, “INCLINE-”: increase or decreases incline. Adjust the incline gradient during excising.
Sets parameter when stopped.
7. “SPEED: 5, 8, 12” Speed adjustment shortcut key
8. “INCL: 5, 8, 12” Incline adjustment shortcut key.
9. Fan button: start or stop the fan (optional).

13
STYLE
3. MAIN FUNCTIONS
3.1. Quick Start-up (Manual):
Attach the safety key. After a 3 second countdown, the treadmill will starting and running from the lowest
speed, add and subtract to the speed using the SPEED button.
3.2. Countdown mode:
Press the MODE button to cycle options: time countdown, distance countdown, calories countdown. The
default value corresponds to the window and flashing display. At this point the SPEED buttons serve as a
plus and minus functions to adjust to the desired value. Press the START, add and subtract speed by
using SPEED buttons once again. When the countdown reaches 0, the machine will stop. You can also
directly press the STOP button or disconnect safety lock to stop.
Timer countdown: press the MODE button to enter the time countdown mode, the time display will show
0:00 adjust desired workout time with speed arrow buttons. Time setting range: 5:00-99:00.
Distance countdown: cycle modes using the MODE button to enter the distance mode, the range display will
show 0:0; adjust desired workout distance with speed arrow buttons. Distance setting range is 0.5-99.0 km.
Calorie countdown: cycle modes using the MODE button to enter the calorie mode, the calorie display will
show 0:0; adjust desired workout calories with speed arrow buttons. Calorie setting range is 10-999 calories
kcal.
3.3. Preset programs:
Press the program button; programs from P1 to P12 are built-in programs. The time window displays the
default value of TIME. When flashing, press the SPEED buttons to adjust to your desired time. Built-in
program are divided into 10 equal segments. After press the START button, the treadmill will
automatically cycle through the time segments. Speed will automatically adjust to the preset value for the
segment. Upon completion of the segments, the program will end, slowing the treadmill down to a stop.
During the operation speed can be adjusted but the next segment will be automatically adjusted to the
program defaults. Built-in program data is listed on the table.

14
STYLE
3.3. Preset programs chart:
Time Mode
TIME INTERVAL
1
2
3
4
5
6
7
8
9
10
P1
SPEED
2
4
3
4
3
5
4
2
5
3
INCLINE
1
2
3
3
1
2
2
3
2
2
P2
SPEED
2
5
4
6
4
6
4
2
4
2
INCLINE
1
2
3
3
2
2
3
4
2
2
P3
SPEED
2
5
4
5
4
5
4
2
3
2
INCLINE
1
2
2
3
1
2
2
2
2
1
P4
SPEED
3
6
7
5
8
5
9
6
4
3
INCLINE
2
2
3
3
2
2
4
6
2
2
P5
SPEED
3
6
7
5
8
6
7
6
4
3
INCLINE
1
2
4
3
2
2
4
5
2
1
P6
SPEED
2
8
6
4
5
9
7
5
4
3
INCLINE
2
2
6
2
3
4
2
2
2
1
P7
SPEED
2
6
7
4
4
7
4
2
4
2
INCLINE
4
5
6
6
9
9
10
12
6
3
P8
SPEED
2
4
6
8
7
8
6
2
3
2
INCLINE
3
5
4
4
3
4
4
3
3
2
P9
SPEED
2
4
5
5
6
5
6
3
3
2
INCLINE
3
5
3
4
2
3
4
2
3
2
P10
SPEED
2
3
5
3
3
5
3
6
3
3
INCLINE
4
4
3
6
7
8
8
6
3
3
P11
SPEED
2
5
8
10
6
9
5
3
2
2
INCLINE
1
3
5
8
10
7
6
3
2
3
P12
SPEED
2
5
5
4
4
6
4
2
3
4
INCLINE
3
5
6
7
12
9
11
11
6
3
4. VALUE RANGE:
PROGRAM
BEGIN
SET UP RANGE
DISPLAY RANGE
TIME(MIN:SECOND)
0:00
15:00
5:00-99:00
0:00－99:59
INCLINE(LEVEL)
0
0
0-20
0-20
SPEED(K/h)
1.0
1.0
1.0-18
1.0-18
DISTANCE(K)
0
1.0
0.5-99.9
0.00－99.9
PULSE(hypo/min)
P
N/A
N/A
50-200
CALORIE(THERM)
0
50
10-999
0－999

15
STYLE
5. HEART RATE:
When holding the hand pulse with two hands, the pulse window will show your heart rate after 5 seconds.
To increase accuracy please check heart rate with the machine stopped and after keeping your hands on
the sensors for more than 30 seconds.
The heart rate data is for reference purposes ONLY.
6. BODY FAT TESTER
Press "PROGRAM” until the window displays "FAT".
Press "MODE" to select parameters after entering data (F1 = "SEX", F2 = "AGE", F3 = "HEIGHT", F4
= "WEIGHT").
Use "SPEED+/-" to set data. After entering all data the window will display "F5".
Place both hands on the hand sensors for 5 seconds, and the window will display your body fat data.
Input parameter display and setting limits
F-1
Sex
01 male
02 female
F-2
Age
10------99
F-3
Height
100----200
F-4
Weight
20-----150
F-5
FAT
≤19
Under weight
FAT
=(20---25)
Normal weight
FAT
=(25---29)
Over weight
FAT
≥30
Obese
7. SLEEP FUNCTION:
The treadmill automatically enters sleep mode after 10 minutes of inactivity. Press any key on the display to
wake the treadmill.

16
STYLE
8. EXERCISE GUIDE
PLEASE NOTE: Before beginning any exercise program, consult your physician. This is important
especially if you are over the age of 45 or individuals with pre-existing health problems.
The pulse sensors are not medical devices. Various factors, including the user’s movement, may
affect the accuracy of heart rate readings. The pulse sensors are intended only as an exercise aid in
determining heart rate trends in general.
Exercising is great way to control your weight, improving your fitness and reduce the effect of aging and
stress. The key to success is to make exercise a regular and enjoyable part of your everyday life.
The condition of your heart and lungs and how efficient they are in delivering oxygen via your blood to your
muscles is an important factor to your fitness. Your muscles use this oxygen to provide enough energy for
daily activity. This is called aerobic activity. When you are fit, your heart will not have to work so hard. It will
pump a lot fewer times per minute, reducing the wear and tear of your heart.
So as you can see, the fitter you are, the healthier and greater you will feel.
Warm-up
Start each workout with 5 to 10 minutes of stretching and some light exercises. A proper warm-up increases
your body temperature, heart rate and circulation in preparation for exercise. Ease into your exercise.

17
STYLE
Training Zone Exercise
After warming up, increase the intensity to your desired exercise program. Be sure to maintain your intensity
for maximum performance. Breathe regularly and deeply as you exercise-never hold your breath.
Cool Down
Finish each workout with a light jog or walk for at least 1 minute. Then complete 5 to 10 minutes of
stretching to cool down. This will increase the flexibility of your muscles and will help prevent post-exercise
problems.
Workout Guidelines
TARGET ZONE
THIS IS HOW YOUR PULSE SHOULD BEHAVE DURING GENERAL FITNESS EXERCISE.
REMEMBER TO WARM UP AND COOL DOWN FOR A FEW MINUTES.
The most important factor here is the amount of effort you put in. The harder and longer you work, the more
calories you will burn. Effectively this is the same as if you were training to improve your fitness, the
difference is the goal.

18
STYLE
9. MAINTENANCE INSTRUCTIONS
Reasonable cleaning/lubricating should be made to extend the life time of this unit. Performance is
maximized when the belt and mat are kept as clean as possible.
WARNING: THE MAT/DECK FRICTION MAY PLAY A MAJOR ROLE IN THE FUNCTION AND LIFE OF
YOUR TREADMILL AND THAT IS WHY WE RECOMMEND YOU CONSTANTLY LUBRICATE THIS
FRICTION POINT TO PROLONG THE USEFUL LIFE OF YOUR TREADMILL. FAILING TO DO THIS
MAY VOID YOUR WARRANTY.
WARNING: UNPLUG POWER CORD BEFORE MAINTENANCE
WARNING: STOP TREADMILL BEFORE FOLDING
1. General Cleaning
Use a soft, damp cloth to wipe the edge of the belt and the area between the belt edge and frame. A
mild soap and water solution along with a nylon scrub brush will clean the top of the textured belt.
This task should be done once a month. Allow to dry before using.
On a monthly basis, vacuum underneath your treadmill to prevent dust build up. Once a year, you
should remove the black motor shield and vacuum out dirt that may accumulate.
2. General Care
Check parts for wear before use.
Pay particular attention to the fixing knobs and make sure they are tight.
Always replace the mat if worn and any other defective parts.

19
STYLE
If in doubt do not use the treadmill and contact our helpline.
TAKE CARE TO PROTECT CARPETS AND FLOOR in case of leakages. This product is a machine that
contains moving parts which have been greased / lubricated and could leak.
3. Belt/Deck/Roller Lubrication
The mat/deck friction may play a major role in the function and life of your treadmill and that is why we
recommend you constantly lubricate this friction point to prolong the useful life of your treadmill. Lubrication
is provided with this unit. You should apply the enclosed lubrication after approximately the first 50 hours of
operation. We recommend lubrication of the deck according to the following timetable:
oLight use (less than 3 hours per week) every 6 months
oMedium use (3-5 hours a week) every 3 months
oHeavy use (more than 5 hours per week) every 6-8 weeks
See below procedures for lubricating:
1. Use a soft, dry cloth to wipe the area between the belt and deck.
2. Spread lubricant onto the inside surface of belt and deck evenly (make sure the machine is turned
off and power is disconnected).
3. Periodically lubricate the front and rear rollers to keep them at their peak performance. If the
treadmill belt/deck/roller is kept reasonably clean it is possible to expect over 1200 hours before
relubricating is necessary.
4. How to check the running mat for proper lubrication:
1. Disconnect the main power supply.
2. Fold the treadmill up into the storage position.
3. Feel the underside surface of the running mat.
If the surface is slick when touched, then no further lubrication is needed.
If the surface is dry to the touch, apply a suitable silicone lubricant.
We recommend that you use a silicone based spray to lubricate your Lifespan treadmill. This can be
purchased from your local sports retailer or hardware store.

20
STYLE
5. Belt Tension Adjustment
It is very important for joggers and runners in order to provide a smooth, steady running surface.Adjustment
must be made from the right and left rear roller in order to adjust tension with theAllen Key provided in the
parts package. The adjustment bolt is located at the end of the rails as noted in the diagram below:
Note: Adjustment is through small hold of end cap.
Tighten the rear roller only enough to prevent slippage at the front roller. Turn both the right and left bolt
clockwise one full turn and inspect for proper tension. When an adjustment is made to the belt tension, you
must also make a tracking adjustment to compensate for the change in belt tension.
DO NOT OVER TIGHTEN - Over tightening will cause belt damage and premature bearing failure.
This may also cause reduced motor performance and excessive roller wear.
NOTE: When properly tightened, the sides of the belt can be raised approximately 2-3 inches off the board.
Left Bolt
Right Bolt