Life Span Traction II User manual

Product may vary slightly from the item pictured due to model upgrades
Read all instructions carefully before using this product. Retain this owner’s manual for
future reference.
TRACTION II
OWNER’S MANUAL

2
TRACTION II
TABLE OF CONTENTS
1. IMPORTANT SAFETY INSTRUCTIONS 3
2. IMPORTANT ELECTRICAL INFORMATION 4
3. IMPORTANT OPERATING INSTRUCTIONS 5
4. ASSEMBLY INSTRUCTIONS 6
5. FOLDING INSTRUCTIONS 9
6. INCLINE INSTRUCTIONS 10
7. GROUNDING METHODS 11
8. OPERATION GUIDE 12
9. EXERCISE GUIDE 18
10. MAINTENANCE GUIDE 20
11. EXPLODED DIAGRAM 24
12. PARTS LIST 25
13. TROUBLE SHOOTING GUIDE 27
14. WARRANTY 29

3
TRACTION II
1. IMPORTANT SAFETY INSTRUCTIONS
WARNING - Read all instructions before using this treadmill.
It is important your treadmill receives regular maintenance to prolong its useful life. Failing to
regularly maintain your treadmill may void your warranty.
Danger –To reduce the risk of electric shock disconnect your treadmill from the electrical outlet prior to
cleaning and/or service work.
DO NOT USE AN EXTENSION CORD: DO NOT ATTEMPT TO DISABLE THE GROUNDED PLUG BY
USING IMPROPER ADAPTERS OR IN ANY WAY MODIFY THE CORD SET.
Install the treadmill on a flat level surface with access to a 220-240 volt (50/60Hz), grounded outlet.
Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both carpet and
treadmill may result.
Do not block the rear of the treadmill. Provide a minimum of 1 metre clearance between the rear of
the treadmill and any fixed object.
Place your unit on a solid, level surface when in use
Never allow children on or near the treadmill.
When running, make sure the plastic clip is fastened on your clothing. It is for your safety, should
you fall or move too far back on the treadmill.
Keep hands away from all moving parts.
Never operate the treadmill if it has a damaged cord or plug.
Keep the cord away from heated surfaces.
Do not operate where aerosol spray products are being used or where oxygen is being administered.
Sparks from the motor may ignite a highly gaseous environment.
Never drop or insert any object into any openings.
The treadmill is intended for in-home use only and not suitable for long time running.

4
TRACTION II
To disconnect, turn all controls to the off position, remove the safety key, and then remove the plug
from the outlet.
The pulse sensors are not medical devices. Various factors, including the user’s movement, may
affect the accuracy of heart rate readings. The pulse sensors are intended only as exercise aids in
determining heart rate trends in general.
Use the handrails provided; they are for your safety.
Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on your
treadmill. Quality athletic shoes are recommended to avoid leg fatigue.
Allowed temperature: 5 to 40 degrees.
Remove the safety key after use to prevent unauthorized treadmill operation.
2. IMPORTANT ELECTRICAL INFORMATION
WARNING!
NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. Route the power
cord away from any moving part of the treadmill including the elevation mechanism and transport
wheels.
NEVER remove any cover without first disconnecting AC power.
NEVER expose this treadmill to rain or moisture. This treadmill is not designed for use outdoors,
near a pool, or in any other high humidity environment.

5
TRACTION II
3. IMPORTANT OPERATING INSTRUCTIONS
Be sure to read the entire manual before operating your machine.
Understand that changes in speed and incline do not occur immediately. Set your desired speed on
the computer console and release the adjustment key. The computer will obey the command
gradually.
Use caution while participating in other activities while walking on your treadmill, such as watching
television, reading, etc. These distractions may cause you to lose balance or stray from walking in
the centre of the belt; which may result in serious injury.
In order to prevent losing balance and suffering unexpected injury, NEVER mount or dismount the
treadmill while the belt is moving. This unit starts with at a very low speed. Simply standing on the
belt during slow acceleration is proper after you have learned to operate this machine.
Always hold on to handrail while making control changes.
A safety key is provided with this machine. Remove the safety key will stop the walking belt
immediately; the treadmill will shut off automatically. Inserting the safety key will reset the display.
Do not use excessive pressure on console control keys. They are precision set to function properly
with little finger pressure.

6
TRACTION II
4. ASSEMBLY INSTRUCTIONS
1
19
22L/R
23
33
51
52
62
63
84
86
91
92
PART LIST
NO.
DESCRIPTION
REMARK
Q’Y
NO.
DESCRIPTION
REMARK
QTY
1
MAIN FRAME
1
62
BOLT
M8*15
８
19
SAFETY KEY
1
63
BOLT
M6*25
6
22L/R
FRONT COVER
2
84
INNER WASHER
∮8.4*∮14.5*
t0.8
８
23
FOOT PLATE
2
86
MP3 OUTPUT
WIRE
1
33
FOOT PLATE PLUG
6
91
BOLT
M4*15
6
51
ALLEN WRENCH
S5
1
92
ALLEN WRENCH
S6
1
52
SCREW DRIVER
1

7
TRACTION II
STEP 1:
STEP 2:
1. Use the M8*15 bolt (62) and washer (84) to
lock the computer (18) to the upright
(4L/4R).
1. Open the box and put mainframe on the
floor;
2. With both hands holding the computer (18),
rotate the uprights (4L/4R) so it is aligned
with the arch pocket on mainframe (2) as
shown by the arrow
3. Use the M8*15 bolt (62) and washer (84) to
secure the uprights (4L/R) to the
mainframe (2)
4. Use the M4*15 bolt (91) to secure the
cover (22) to the mainframe (2)
5. Pull up (4L/4R), as shown by the arrow,
and rotate until it is aligned with the arch
pockets on uprights (4L/4R).

8
TRACTION II
STEP 3:
STEP 4:
ATTENTION
You must first confirm that you have performed a complete assembly as outlined above and
secured all nuts bolts before proceeding with the following.
1. Put on the safety key and MP3 output wire
1. Use the M6*25 bolt (63) to lock the foot
plate (23) to the running board (13) tightly
2. Attach the foot plate plug (33)

9
TRACTION II
5. FOLDING INSTRUCTIONS
Folding:
Unfolding:
Erect the base frame using position (A)
until you hear the click sound emitted by
the lock pin
Whilst supporting position (A) with your
hand, use your hand to pull the spring
pin (B) lightly and allow the machine to
descend but itself smoothly.
A
A
B

10
TRACTION II
6. INCLINE INSTRUCTIONS
PICTURE 1
PICTURE 2
“INCLINE+/-”and “+/-”on left handrail are incline add and subtract buttons.
When adjusting the incline whilst the treadmill is running, the increase is 1 level per press.
Holding the incline for button more than 2 seconds will quickly increase or decrease the incline.
There are also shortcut keys 3, 6, 9, 12 on the computer.
Picture 1 shows incline ”0”, Picture 2 shows incline “20”.

11
TRACTION II
7. GROUNDING METHODS
This product must be grounded. In the event of malfunction or breakdown, grounding reduces the
risk of electric shock. This product is equipped with a cord with an equipment-grounding conductor
and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed
and grounded in accordance with all local codes and ordinances.
DANGER
Improper connection of the equipment-grounding conductor can result in risk of electric shock.
Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly
grounded.
Do not modify the plug provided with the product –if it will not fit the outlet; have a proper outlet installed by
a qualified electrician.
This product is for use on a nominal 240-volt circuit and has a grounding plug that looks like the plug
illustrated in sketch A in following figure. Ensure the product is connected to an outlet having the same
configuration as the plug. No adapter should be used with this product.

12
TRACTION II
8. OPERATION GUIDE
1. OVERVIEW
2. START
Quick start after a 3 second countdown
3. PROGRAM
Cycles through available programs –3 manual, 99 preset
4. SAFETY LOCK
Display window will show “---” if safety key is removed and the treadmill will stop immediately after emitting 2
beeps. Replace the safety key to resume normal operation.

13
TRACTION II
5. BUTTON FUNCTIONS
5.1 START/STOP
START –when the treadmill is not running, press this button to start at 1km/h
STOP –when the treadmill is running, press this button to stop and return the program back to the default
manual program
5.2 PROGRAM
When the treadmill is not running, press the ‘PROG’button to cycle through available programs and
choose desired program from “1.0”(manual) to “P01—P99”(preset) to FAT (BMI test).
Manual mode is the default program, the default speed in kilometers is 1.0 km/h. and the fastest speed
is 22.0 km/h.
A) Press "PROG" and the window will show "P01--P99". Choose the desired program, and the "TIME"
window will show "10:00", and press "INCLINE+/-" & "SPEED+/-" to set desired duration, and then
press "START" to run.
B) Press “START” to start the preset program. All programs are divided into 10 sections. The time for each
section is 1/10th of the total program time. When the system enters into the next section, the treadmill will
emit 3 “beeps” and the speed will be changed according to the program settings.
C)You can press "INCLINE+/-" & "SPEED+/-" to change the speed and incline in every section,
however when the treadmill reaches the next section, it will return its default speed and incline set by
the program.
D) When you are about to complete a program, the treadmill will emit 3 beeps it will stop gradually
within 5 seconds. The window will show "END".
5.3 MODE
Whilst the treadmill is not running, pressing this button cycles through modes: "0:00", "15:00", "1.0",
"50" ('"0:00” = Manual mode; "15:00" = timer countdown mode, "1.0" = distance countdown mode and
"50" = calorie countdown mode). Upon selecting a mode, pressing the speed button to will change the
total amount. The START button will start the selected mode.

14
TRACTION II
6. DISPLAY FUNCTIONS
SPEED –running speed
TIME –running time, time remaining
DISTANCE –running distance, distance remaining
CALORIE –calories burnt, calories remaining
PULSE –current pulse (beats per minute)
7. PULSE FUNCTION
Hold hand pulse sensors for 5 seconds. Heart shaped graphics will appear when the machine is testing
pulse. Heart rate data is for reference ONLY.

15
TRACTION II
8. BODY FAT TESTER
Press "PROGRAM” until the window displays "FAT".
Press "MODE" to select parameters after entering data (F1 = "SEX", F2 = "AGE", F3 = "HEIGHT", F4
= "WEIGHT").
Use "SPEED+/-" to set data. After entering all data the window will display "F5".
Place both hands on the hand sensors for 5 seconds, and the window will display your body fat data.
Input parameter display and setting limits
PARAMETERS
ARRANGEMENT
NOTE
F-1
SEX
01--02
01= MALE 02= FEMALE
F-2
AGE
10—99 YEARS
F-3
HEIGHT
100—200 CM
F-4
WEIGHT
20—150 KGS
FA（BMI）
RESULT
≤19
UNDER WEIGHT
20--25
NORMAL WEIGHT
25--29
OVER WEIGHT
≥30
OBESITY

16
TRACTION II
9. PROGRAM TABLE
Section
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
P0
Incline
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Speed
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
P1/
P49
Incline
1
1
2
2
2
3
3
2
2
1
2
2
2
1
1
3
3
2
2
2
Speed
2
3
3
4
5
3
4
5
5
3
4
5
4
4
4
2
3
3
5
3
P2/
P50
Incline
1
2
2
2
2
3
3
2
2
2
2
2
3
3
3
4
4
3
2
2
Speed
2
4
4
5
6
4
6
6
6
4
5
6
4
4
4
2
2
5
4
2
P3/
P51
Incline
2
3
3
2
2
3
3
3
2
2
2
2
4
4
4
6
6
3
2
2
Speed
2
4
4
6
6
4
7
7
7
4
7
7
4
4
4
2
4
5
3
2
P4/
P52
Incline
2
3
3
2
2
3
3
3
2
2
2
2
4
4
4
6
6
3
2
2
Speed
3
5
5
6
7
7
5
7
7
8
8
5
9
5
5
6
6
4
4
3
P5/
P53
Incline
3
3
3
4
4
5
5
5
4
4
4
4
5
5
3
3
3
2
2
2
Speed
2
4
4
5
6
7
7
5
6
7
8
8
5
4
3
3
6
5
4
2
P6/
P54
Incline
3
5
5
5
4
4
4
3
3
3
3
4
4
4
3
3
3
4
3
2
Speed
2
4
4
5
6
8
8
6
7
8
8
6
6
4
4
2
5
4
3
2
P7/
P55
Incline
4
4
4
4
3
3
6
6
6
7
7
8
8
9
9
6
6
5
3
3
Speed
2
3
3
3
4
5
3
4
5
3
4
5
3
3
3
6
6
5
3
3
P8/
P56
Incline
4
5
5
5
6
6
6
7
8
9
9
9
10
10
10
12
12
8
6
3
Speed
2
3
3
6
7
7
4
6
7
4
6
7
4
4
4
2
3
4
4
2
P9/
P57
Incline
5
5
5
6
6
6
4
4
6
6
5
5
8
8
9
9
9
7
4
2
Speed
2
4
4
7
7
4
7
8
4
8
9
9
4
4
4
5
6
3
3
2
P10/
P58
Incline
5
6
6
6
7
5
8
8
4
4
4
5
5
8
8
10
10
8
6
3
Speed
2
4
5
6
7
5
4
6
8
8
6
6
5
4
4
2
4
4
3
3
P11/
P59
Incline
4
5
3
2
6
6
2
2
2
2
2
4
5
6
3
2
5
5
2
0
Speed
2
5
8
10
7
7
10
10
7
7
10
10
6
6
9
9
5
5
4
3
P12/
P60
Incline
1
2
3
2
3
5
5
0
0
2
3
5
7
3
3
5
6
7
6
3
Speed
3
4
9
9
5
9
5
8
5
9
7
5
5
7
9
9
5
7
6
3
P13/
P61
Incline
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Speed
2
3
4
5
6
5
4
3
2
1
2
3
4
5
6
5
4
3
2
1
P14/
P62
Incline
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Speed
2
4
6
8
6
6
4
4
2
2
2
4
6
8
6
6
4
4
2
2
P15/
P63
Incline
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Speed
2
4
6
8
10
8
6
4
2
2
2
4
6
8
10
8
6
4
2
2
P16/
P64
Incline
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Speed
2
2
6
6
8
10
6
6
2
2
2
2
6
6
8
10
6
6
2
2
P17/
P65
Incline
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Speed
2
3
4
5
2
3
4
5
3
2
2
3
4
5
2
3
4
5
3
2
P18/
P66
Incline
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Speed
2
4
6
2
4
6
2
4
6
2
2
4
6
2
4
6
2
4
6
2
P19/
P67
Incline
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Speed
1
3
4
5
6
5
4
3
2
1
1
3
4
5
6
5
4
3
2
1
P20/
P68
Incline
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Speed
1
4
6
8
6
6
4
4
2
2
1
4
6
8
6
6
4
4
2
2
P21/
P69
Incline
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Speed
1
4
6
8
10
8
6
4
2
2
1
4
6
8
10
8
6
4
2
2
P22/
P70
Incline
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Speed
1
2
6
6
8
10
6
6
2
2
1
2
6
6
8
10
6
6
2
2
P23/
P71
Incline
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Speed
1
3
4
5
2
3
4
5
3
2
1
3
4
5
2
3
4
5
3
2
P24/
P72
Incline
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Speed
1
4
6
2
4
6
2
4
6
2
1
4
6
2
4
6
2
4
6
2
P25/
P73
Incline
2
6
6
8
10
8
6
6
2
2
2
6
6
8
10
8
6
6
2
2
Speed
2
3
4
5
6
5
4
3
2
1
2
3
4
5
6
5
4
3
2
1
P26/
P74
Incline
2
3
4
5
2
3
4
5
4
3
2
3
4
5
2
3
4
5
4
3
Speed
2
4
6
8
6
6
4
4
2
2
2
4
6
8
6
6
4
4
2
2
P27/
P75
Incline
2
4
6
2
4
6
2
4
6
2
2
4
6
2
4
6
2
4
6
2
Speed
2
4
6
8
10
8
6
4
2
2
2
4
6
8
10
8
6
4
2
2
P28/
P76
Incline
1
3
1
2
1
2
1
1
2
0
1
3
1
2
1
2
1
1
2
1
Speed
2
2
6
6
8
10
6
6
2
2
2
2
6
6
8
10
6
6
2
2
P29/
P77
Incline
1
2
2
3
4
4
3
2
1
0
1
2
2
3
4
4
3
2
1
1
Speed
2
3
4
5
2
3
4
5
3
2
2
3
4
5
2
3
4
5
3
2

17
TRACTION II
P30/
P78
Incline
1
4
5
7
9
11
9
7
5
3
1
4
5
7
9
11
9
7
5
3
Speed
2
4
6
2
4
6
2
4
6
2
2
4
6
2
4
6
2
4
6
2
P31/
P79
Incline
2
5
6
8
1
8
6
6
2
2
2
5
6
8
1
8
6
6
2
2
Speed
1
3
4
5
6
5
4
3
2
1
1
3
4
5
6
5
4
3
2
1
P32/
P80
Incline
2
4
4
5
2
3
4
5
4
3
2
4
4
5
2
3
4
5
4
3
Speed
1
4
6
8
6
6
4
4
2
2
1
4
6
8
6
6
4
4
2
2
P33/
P81
Incline
2
3
6
2
4
6
2
4
6
2
2
3
6
2
4
6
2
4
6
2
Speed
1
4
6
8
1
8
6
4
2
2
1
4
6
8
10
8
6
4
2
2
P34/
P82/
P99
Incline
4
5
5
5
6
6
6
7
8
9
9
9
1
1
1
12
12
8
6
3
Speed
2
3
3
6
7
7
4
6
7
4
6
7
4
4
4
2
3
4
4
2
P35/
P83
Incline
5
5
5
6
6
6
4
4
6
6
5
5
8
8
9
9
9
7
4
2
Speed
2
4
4
7
7
4
7
8
4
8
9
9
4
4
4
5
6
3
3
2
P36/
P84/
P/98
Incline
5
6
6
6
7
5
8
8
4
4
4
5
5
8
8
1
1
8
6
3
Speed
2
4
5
6
7
5
4
6
8
8
6
6
5
4
4
2
4
4
3
3
P37/
P55
Incline
2
6
6
8
1
8
6
6
2
2
2
6
6
8
1
8
6
6
2
2
Speed
2
3
4
5
6
5
4
3
2
1
2
3
4
5
6
5
4
3
2
1
P38/
P86
Incline
2
3
4
5
2
3
4
5
4
3
2
3
4
5
2
3
4
5
4
3
Speed
2
4
6
8
6
6
4
4
2
2
2
4
6
8
6
6
4
4
2
2
P39/
P87/
P97
Incline
2
4
6
2
4
6
2
4
6
2
2
4
6
2
4
6
2
4
6
2
Speed
2
4
6
8
10
8
6
4
2
2
2
4
6
8
10
8
6
4
2
2
P40/
P88
Incline
1
3
1
2
1
2
1
1
2
0
1
3
1
2
1
2
1
1
2
1
Speed
2
2
6
6
8
10
6
6
2
2
2
2
6
6
8
10
6
6
2
2
P41/
P89
Incline
1
2
2
3
4
4
3
2
1
0
1
2
2
3
4
4
3
2
1
1
Speed
2
3
4
5
2
3
4
5
3
2
2
3
4
5
2
3
4
5
3
2
P42/
P90
Incline
1
4
5
7
9
11
9
7
5
3
1
4
5
7
9
11
9
7
5
3
Speed
2
4
6
2
4
6
2
4
6
2
2
4
6
2
4
6
2
4
6
2
P43/
P91
Incline
2
5
6
8
1
8
6
6
2
2
2
5
6
8
1
8
6
6
2
2
Speed
1
3
4
5
6
5
4
3
2
1
1
3
4
5
6
5
4
3
2
1
P44/
P92
Incline
2
4
4
5
2
3
4
5
4
3
2
4
4
5
2
3
4
5
4
3
Speed
1
4
6
8
6
6
4
4
2
2
1
4
6
8
6
6
4
4
2
2
P45/
P93
Incline
2
3
6
2
4
6
2
4
6
2
2
3
6
2
4
6
2
4
6
2
Speed
1
4
6
8
10
8
6
4
2
2
1
4
6
8
10
8
6
4
2
2
P46/
P94
Incline
4
5
5
5
6
6
6
7
8
9
9
9
10
10
10
12
12
8
6
3
Speed
2
3
3
6
7
7
4
6
7
4
6
7
4
4
4
2
3
4
4
2
P47/
P95
Incline
5
5
5
6
6
6
4
4
6
6
5
5
8
8
9
9
9
7
4
2
Speed
2
4
4
7
7
4
7
8
4
8
9
9
4
4
4
5
6
3
3
2
P48/
P96
Incline
5
6
6
6
7
5
8
8
4
4
4
5
5
8
8
1
1
8
6
3
Speed
2
4
5
6
7
5
4
6
8
8
6
6
5
4
4
2
4
4
3
3

18
TRACTION II
9. EXERCISE GUIDE
PLEASE NOTE: Before beginning any exercise program, consult your physician. This is important
especially if you are over the age of 45 or individuals with pre-existing health problems.
The pulse sensors are not medical devices. Various factors, including the user’s movement, may
affect the accuracy of heart rate readings. The pulse sensors are intended only as an exercise aid in
determining heart rate trends in general.
Exercising is great way to control your weight, improving your fitness and reduce the effect of aging and
stress. The key to success is to make exercise a regular and enjoyable part of your everyday life.
The condition of your heart and lungs and how efficient they are in delivering oxygen via your blood to your
muscles is an important factor to your fitness. Your muscles use this oxygen to provide enough energy for
daily activity. This is called aerobic activity. When you are fit, your heart will not have to work so hard. It will
pump a lot fewer times per minute, reducing the wear and tear of your heart.
So as you can see, the fitter you are, the healthier and greater you will feel.
Warm-up
Start each workout with 5 to 10 minutes of stretching and some light exercises. A proper warm-up increases
your body temperature, heart rate and circulation in preparation for exercise. Ease into your exercise.

19
TRACTION II
Training Zone Exercise
After warming up, increase the intensity to your desired exercise program. Be sure to maintain your intensity
for maximum performance. Breathe regularly and deeply as you exercise-never hold your breath.
Cool Down
Finish each workout with a light jog or walk for at least 1 minute. Then complete 5 to 10 minutes of
stretching to cool down. This will increase the flexibility of your muscles and will help prevent post-exercise
problems.
Workout Guidelines
TARGET ZONE
THIS IS HOW YOUR PULSE SHOULD BEHAVE DURING GENERAL FITNESS EXERCISE.
REMEMBER TO WARM UP AND COOL DOWN FOR A FEW MINUTES.
The most important factor here is the amount of effort you put in. The harder and longer you work, the more
calories you will burn. Effectively this is the same as if you were training to improve your fitness, the
difference is the goal.

20
TRACTION II
10. MAINTENANCE INSTRUCTIONS
Reasonable cleaning/lubricating should be made to extend the life time of this unit. Performance is
maximized when the belt and mat are kept as clean as possible.
WARNING: THE MAT/DECK FRICTION MAY PLAY A MAJOR ROLE IN THE FUNCTION AND LIFE OF
YOUR TREADMILL AND THAT IS WHY WE RECOMMEND YOU CONSTANTLY LUBRICATE THIS
FRICTION POINT TO PROLONG THE USEFUL LIFE OF YOUR TREADMILL. FAILING TO DO THIS
MAY VOID YOUR WARRANTY.
WARNING: UNPLUG POWER CORD BEFORE MAINTENANCE
WARNING: STOP TREADMILL BEFORE FOLDING
1. General Cleaning
Use a soft, damp cloth to wipe the edge of the belt and the area between the belt edge and frame. A
mild soap and water solution along with a nylon scrub brush will clean the top of the textured belt.
This task should be done once a month. Allow to dry before using.
On a monthly basis, vacuum underneath your treadmill to prevent dust build up. Once a year, you
should remove the black motor shield and vacuum out dirt that may accumulate.
2. General Care
Check parts for wear before use.
Pay particular attention to the fixing knobs and make sure they are tight.
Always replace the mat if worn and any other defective parts.