
OPERATING INSTRUCTIONS
Please read the operating instructions before using the Sonic X.
Keep this manual for reference.
CHARGING
• Fully charge your Sonic X (for up to six hours) before using it for
the first time.
• To charge: connect the USB-C charging cable to the port on the bottom
of the handle and to a USB power adapter, such as a 5V 1A/2A phone
charger.
• The Battery Indicator LEDs will flash during charging. Full charge is
indicated when all LEDs remain fully illuminated.
• During use, battery level is indicated by four Battery Indicator LEDs:
• 1st LED Lit = 20–35% • 2nd LED Lit = 40–60%
• 3rd LED Lit = 65–80% • 4th LED Lit = 85–100%
• When the 1st LED flashes, less than 20% battery charge remains and
the device should be charged right away.
• You may charge the battery at any time, no matter the battery level.
• Average run-time is 2-4 hours (depending on the speed level used).
USING YOUR SONIC X
1. Slide the Power Switch on the bottom of the handle to the ON position
to turn on the Sonic X to standby mode. The Intelligent Pressure
Sensor LEDs will light up.
2. Press the touch screen to toggle through the three available speed
levels (1-3). The Speed Indicator LEDs will light up to show the
current selected vibration speed.
3. At the desired speed, float the head of the massage attachment along
a muscle group.
4. Apply pressure as needed. The Intelligent Pressure Sensor LEDs will
change color to indicate the force you are using: mild is blue, moderate
is purple, heavy is read.
5. Slide the Power Switch to the OFF position to power off the device at
any time.
10 Sonic X User Manual Lifepro
6. The Sonic X will power off automatically after 10 minutes of use.
To continue use, simply press touch screen to turn on vibration again.
REMOVING AND REPLACING
A MASSAGE ATTACHMENT
1. Slide the Power switch on the bottom of the handle to the OFF
position to power off the Sonic X.
2. Rotate the inserted attachment counter-clockwise (about 90°) to
remove it.
3. Insert the stem of the attachment into the nozzle and rotate it
clockwise (about 90°), until the vertical line on the attachment is lined
up with the line on the nozzle.
SoarFX Collection 11
TIPS FOR USING YOUR SONIC X
• Move the Sonic X over the desired muscle groups,
about 60 seconds per region.
• Apply pressure as needed; however, there should
never be a need to press very hard. The vibration
pulses do all the hard work.
• Use the Sonic X for ten-minute sessions, up to 3
times per day.
• Avoid keeping the massage head in one area for more
than 3 minutes.
• Prolonged application can traumatize tissues.