Lifetime 60054 User manual

Keep this Identification Number in case you must contact our Customer Service Department.
MODEL N° 60054
OWNER’S MANUAL
Copy

2
REGISTER YOUR LIFETIME PRODUCT TODAY!
LIFETIME’S PROMISE TO YOU:
We invite you to read our privacy policy at www.lifetime.com
REGISTER today!
There are benefits to registering your Lifetime product. With our new online product registration form, it’s fast and easy! Register with us at www.lifetime.com
and enjoy these great benefits:
s2ECEIVEEXCLUSIVEMONEYSAVINGOFFERSFROM"UY,IFETIMECOMOURONLINESTOREASWELLAS.%7PRODUCTNOTIlCATIONSANDSPECIALCLOSEOUT
PROMOTIONS
s)NTHEUNLIKELYEVENTOFAPRODUCTRECALLORSAFETYMODIlCATIONWEWILLNOTIFYYOU
s2EGISTERINGYOURPRODUCTGUARANTEESYOUWARRANTYSERVICE)FYOUDONOTREGISTERYOURPRODUCTYOURWARRANTYRIGHTSWILLNOTBEDIMINISHED
"UTYOUWILLNEEDTOPROVIDEASALESRECEIPTTOVERIFYYOURPRODUCTPURCHASEDATEBEFOREWARRANTYSERVICEWILLBEPROVIDED
Maintaining your privacy is our long-standing policy at Lifetime. And you can rest assured that Lifetime will not sell or provide your
personal data to other third parties, or allow them to use your personal data for their own purposes.
&ORCUSTOMERSOUTSIDETHE53OR#ANADAPLEASECONTACTTHESTOREFORASSISTANCE
**U.S. and Canada customers ONLY**
)&!33)34!.#%)3.%%$%$
DO NOT CONTACT THE STORE!
CALL OUR CUSTOMER SERVICE DEPARTMENT at 1 [phone]
(/523AMTOPM-ONDAYTHROUGH&RIDAY-OUNTAIN3TANDARD4IME
#ALLORVISITOUR7EBSITEFOR3ATURDAYHOURS
Most injuries are caused by misuse and/or not following instructions. Use caution when using this system.
4OENSURESAFETYDONOTATTEMPTTOASSEMBLETHISPRODUCTWITHOUTFOLLOWINGTHEINSTRUCTIONSCAREFULLY#HECKENTIREBOXANDINSIDEALLPACKING
MATERIALFORPARTSANDORADDITIONALINSTRUCTIONMATERIAL"EFOREBEGINNINGASSEMBLYREADTHEINSTRUCTIONSANDIDENTIFYPARTSUSINGTHEHARDWARE
IDENTIlERANDPARTSLISTINTHISDOCUMENT0ROPERANDCOMPLETEASSEMBLYUSEANDSUPERVISIONAREESSENTIALTOREDUCETHERISKOFACCIDENTOR
INJURY!HIGHPROBABILITYOFSERIOUSINJURYEXISTSIFTHISSYSTEMISNOTINSTALLEDMAINTAINEDANDOROPERATEDPROPERLY
FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY OR PROPERTY
DAMAGE AND WILL VOID WARRANTY.
s4WOCAPABLEADULTSARERECOMMENDEDFORASSEMBLY
s&OLLOWANYANDALLWARNINGSANDCAUTIONSCAREFULLY
s!SSEMBLEONLEVELGROUND
s#HECKALLNUTSANDSCREWSFORTIGHTNESSBEFOREANDDURINGTHEUSAGESEASON
SAFETY INSTRUCTIONS
Instruction #1072370 B 11/26/2010
Copy

3
8 mm & 10 mm Wrench
  
Safety Glasses2.5 mm Allen Wrench Needle-Nosed Pliers
PAIRFOREACHPERSON
TOOLS REQUIRED FOR THIS ASSEMBLY
*TWO ADULTS REQUIRED TO
COMPLETE ASSEMBLY*
BEFORE BEGINNING ASSEMBLY
Keep the hardware bags and their contents separate. If any parts are missing, call our Customer Service
Department.


4
This area is located at the top, left-hand
corner of the page and indicates which tools
and hardware are needed to complete the
assembly steps on a page.
This area is located at the top, right-hand
corner of the page and shows an image of the
product with shaded parts indicating which
section is being assembled.
SEC
#
Note:
!
Refer to the following areas throughout the instructions
to assist in the assembly process:
This area is usually located in the bottom,
left-hand corner of a step and indicates that
special attention is needed to perform a
particular part of a step.
These areas are usually located in the bottom,
right-hand corner of a step and indicate that
damage to the product or serious injury may
occur if the caution or warning is not heeded.
Throughout the Parts & Hardware List, Part
& Hardware Identifiers, and instructions
are three-letter IDs. These IDs are below
the images of the parts and hardware to
help you locate and identify the parts and
hardware during assembly. These IDs are not
necessarily on the parts themselves.
WARNING
ASSEMBLY GUIDES
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
CAUTION
ADZX
vXv0AN(EAD3CREW

5
PARTS LIST
ID Item Description Qty
#2+ "ENCH!SSEMBLY 
#4+ 4ABLE4OP"ACK2EST!SSEMBLY 
#2, #ROSS3UPPORT 
#2) ,EFT,EG 
#2* 2IGHT,EG 
#42 -ETAL4UBE 
CTW Leg & Bench Assembly Hardware Bag
#3) -XXMM(EX(EAD"OLT 
#46 -XXMM(EX(EAD"OLT 
!/. -X#AP.UT 
#3( MMMM7RENCH 
ID Item Description Qty
CTX Hinge & Table Top/Back Rest Assembly Hardware Bag
#43 !DJUSTMENT&ORK 
#44 !DJUSTMENT0LATE 
#41 !DJUSTMENT,EVER 
#3* -XXMM(EX(EAD"OLT 
#46 -XXMM(EX(EAD"OLT 
!/. -X#AP.UT 
#45 #OTTER+EY 
#4, .YLOCK.UT 
#4- Xv"UTTON(EAD3CREW 
#4. v&LAT7ASHER 
#4/ 3PRING 
#40 MM!LLEN7RENCH 
#5+ v2OUND#AP0LUG 
PART ILLUSTRATIONS
!LLPARTSARESHOWNATSCALE
CRKX
"ENCH!SSEMBLY
CTKX
4ABLE4OP"ACK2EST!SSEMBLY
CRLX
#ROSS3UPPORT
PARTS IDENTIFIER
CRIX
,EFT,EG
CRJX
2IGHT,EG
CTRX
-ETAL4UBE

6
AONX
-X#AP.UT
AONX
-X#AP.UT
CSHX
MMMM7RENCH
CTPX
MM!LLEN7RENCH
HARDWARE IDENTIFIER
CSIX
-XXMM(EX(EAD"OLT
CSJX
-XXMM(EX(EAD"OLT
*CTTX
!DJUSTMENT0LATE
*CTSX
!DJUSTMENT&ORK
*CTQX
!DJUSTMENT,EVER
CTVX
-XXMM(EX(EAD"OLT
CTVX
-XXMM(EX(EAD"OLT
CUKX
v2OUND#AP0LUG
CTLX
.YLOCK.UT
47 mm
54 mm
52 mm
52 mm
LEG & BENCH ASSEMBLY HARDWARE BAG [CTW]
(ARDWARESHOWNATACTUALSIZE
HINGE & TABLE TOP/BACK REST ASSEMBLY HARDWARE BAG [CTX]
(ARDWARESHOWNATACTUALSIZE5NLESSNOTEDOTHERWISE
CTMX
Xv"UTTON(EAD3CREW CTNX
v&LAT7ASHER
CTOX
3PRING
CTUX
#OTTER+EY

7
AONX
-X#AP.UT
CSIX
-XXMM(EX(EAD"OLT
CTVX
-XXMM(EX(EAD"OLT
47 mm 52 mm
CRIX
,EFT,EG
CRJX
2IGHT,EG
LEG & BENCH ASSEMBLY
HARDWARE REQUIRED
PARTS REQUIRED
TOOLS REQUIRED
SEC
1
Safety Glasses
(ARDWARESHOWNATACTUALSIZE
CSHX
MMMM7RENCH
0ARTSSHOWNATOFACTUALSIZE
HARDWARE BAG REQUIRED: CTW
HARDWARE BAG REQUIRED: CTW
CRKX
"ENCH!SSEMBLY
CRLX
#ROSS3UPPORT
CSHX
MMMM7RENCH

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
8
SEC
CRJ
CSI
CSI
AONX
SEC
1.1
Lifetime Logo is on
bottom
,AYTHE Right Leg (CRJ)mATONTHEGROUNDASSHOWN)NSERTTWOM6 x 1 x 47 mm Hex-Head Bolts (CSI)THROUGHTHE
HOLESATTHEFRONTOFTHE2IGHT,EGASSHOWN
1
CSIX
AON
AON
CRL
Lifetime Logo faces outward
as shown
SEC
1.2
0LACETHEHOLESONTHEENDOFTHECross Support (CRL)OVERTHETWO(EX"OLTSYOUJUSTINSERTEDINTHEPREVIOUSSTEP
3ECURETHE#ROSS3UPPORTUSINGTWOM6 x 1 Cap Nuts (AON)ASSHOWNTighten Nuts securely, but do not overtighten.
47 mm
10 mm (x2)
WARNING
$ONOTOVERTIGHTENTHE#AP.UT)FTHEENDOF
THE"OLTBREAKSTHROUGHTHEPLASTICCAPCALLOUR
#USTOMER3ERVICE$EPARTMENT%XPOSEDTHREADS
ONTHEENDOFTHE"OLTMAYCAUSESERIOUSINJURIES

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
9
SEC
3ETDOWNTHE!SSEMBLYASSHOWN7HILEANOTHERADULTHOLDSTHE!SSEMBLYINPLACECONNECTTHELeft Leg (CRI) to
THE#ROSS3UPPORTUSINGTHEREQUIREDHARDWARETighten Nuts securely, but do not overtighten.
**TWO ADULTS REQUIRED FOR THIS STEP**
SEC
1.3
SEC
1.4
3ETABench Assembly (CRK)DOWNONTOTHE,EGSWITHTHEHOLESINTHECROSSBARSTOWARDTHEFRONTASSHOWN5SETHE
LOCATIONNUBTOALIGNTHEHOLESINTHECROSSBARSWITHTHOSEINTHE,EGS
Align these holes.
Location Nub
Cross Bar
1
CSI
CRI
CRK
AON
AON
CSI
AONX
CSIX
47 mm
10 mm (x2)
WARNING
$ONOTOVERTIGHTENTHE#AP.UT

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
10
SEC
SEC
1.5
!LIGNTHEHOLESINTHELEFTMOSTBRACEINTHE"ENCHWITHTHOSEINTHE,EFT,EG3ECURETHE"ENCHTOTHE,EG
USINGTHEREQUIREDHARDWARE Tighten Nuts securely, but do not overtighten. Repeat this step for the right side of the
Bench Assembly.
Left-Most Brace
1
10 mm (x2)
AONX
AON
AON
CTV
CTV
CTVX
52 mm
WARNING
$ONOTOVERTIGHTENTHE#AP.UT

11
HINGE & TABLE TOP/BACK REST ASSEMBLY
HARDWARE REQUIRED
PARTS REQUIRED
TOOLS REQUIRED
SEC
2
Safety Glasses
(ARDWARESHOWNATACTUALSIZE5NLESSOTHERWISENOTED
0ARTSSHOWNATOFACTUALSIZE
HARDWARE BAG REQUIRED: CTX
HARDWARE BAGS REQUIRED: CTW, CTX
CTKX
4ABLE4OP"ACK2EST!SSEMBLY
AONX
-X#AP.UT
CSJX
-XXMM(EX(EAD"OLT
CTVX
-XXMM(EX(EAD"OLT
CTLX
.YLOCK.UT
54 mm 52 mm
CTMX
Xv"UTTON(EAD3CREW
CTNX
v&LAT7ASHER
CTOX
3PRING
CTUX
#OTTER+EY
*CTTX
!DJUSTMENT0LATE
*CTSX
!DJUSTMENT&ORK
*CTQX
!DJUSTMENT,EVER
CTPX
MM!LLEN7RENCH
CSHX
MMMM7RENCH
CTRX
-ETAL4UBE
CTPX
MM!LLEN7RENCH
Needle-Nosed Pliers
CUKX
v2OUND#AP0LUG

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
12
SEC
CUKX
These holes must be aligned
CUK
CTR
CTR
CUK
CUK
SEC
2.1
)NSERTA1/2” Round Cap Plug (CUK) INTOEACHENDOFTHEMetal Tube (CTR)ASSHOWN
2

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
13
SEC
SEC
2.2
SEC
2.3
3LIDEANAdjustment Plate (CTT)OVERTHEENDOFTHE-ETAL4UBEASSHOWN
CTS
CTT
)NSERTANAdjustment Fork (CTS)INTOTHETWOHOLESNEARTHEENDOFTHE-ETAL4UBEASSHOWN(Fig. 1)&INALLYSLIDETHE
0LATEOVERTHE!DJUSTMENT&ORK(Fig. 2).
Fig. 1
Fig. 2
2
CTTX
.OTTO3CALE
CTSX
.OTTO3CALE

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
14
SEC
CTT
CTU
CTUX
SEC
2.4
3LIDEASECONDAdjustment Plate (CTT)OVERTHE-ETAL4UBEANDOVERTHE!DJUSTMENT&ORKASSHOWN
SEC
2.5
)NSERTACotter Key (CTU)THROUGHTHEHOLEJUSTTOTHELEFTOFTHElRST!DJUSTMENT0LATEASSHOWNIf necessary, use a
pair of pliers or needle-nosed pliers to help insert the Cotter Key.
2
CTTX
.OTTO3CALE

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
15
SEC
SEC
2.6
SEC
2.7
3LIDEANAdjustment Lever (CTQ)OVERTHEENDOFTHE-ETAL4UBEANDALIGNTHEHOLESINTHE!DJUSTMENT,EVERWITHTHOSE
INTHEENDOFTHE-ETAL4UBE4HENINSERTTWO#8 x 7/8” Button-Head Screws (CTM)THROUGHTHEHOLESINTHE-ETAL
4UBEANDTHE!DJUSTMENT,EVERASSHOWN3ECUREWITHTWO#8 Nylock Nuts (CTL). Repeat sections 2.1 - 2.5 for the
other end of the Metal Tube.
CTLX
CTMX
CTM CTM
3ETTHE!SSEMBLYONTOTHE,EGSWITHTHE!DJUSTMENT0LATESONTHEOUTSIDEOFTHE,EGSANDALIGNTHEHOLESATTHE
TOPOFTHE,EGSWITHTHEHOLESANDGROOVESINTHE0LATESASSHOWN
CTQ
CTL CTL
2
Align these holes
Align these holes and
grooves
Set Adjustment Fork into the nook on the
Legs as shown.
8 mm
CTQX
.OTTO3CALE

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
16
SEC
CTNX
CTOX
SEC
2.8
)NSERTTWOM6 x 1 x 54 mm Hex-Head Bolts (CSJ)THROUGHTWO1/4” Flat Washers (CTN)THEHOLESINTHE4ABLE,EGSANDTWO
more 1/4” Flat Washers (CTN)3ECURETHE"OLTSWITHTWOM6 x 1 Cap Nuts (AON)BUTDONOTOVERTIGHTEN Repeat this step for the
other side of the Metal Tube.
2
SEC
2.9
5SINGAPAIROFNEEDLENOSEDPLIERSLOOPTHEBOTTOMENDOFASpring (CTO)OVERTHEUPPER"OLTASSHOWN0ULLTHE
UPPERENDOFTHE3PRINGOVERANDINTOTHEGROOVEOFTHE!DJUSTMENT&ORKASSHOWNRepeat this step for the Spring on
the other side of the Metal Tube.
Connect the bottom loop of the Spring
to this Bolt.
Stretch the upper loop of the Spring up and
over the Adjustment Fork and into the groove.
CTO
AONX
CSJX
54 mm
10 mm (x2)
CSJ CTN CTN AON
WARNING
$ONOTOVERTIGHTENTHE#AP.UT
Note: Do not overtighten Nuts
and Bolts.
!

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
17
SEC
SEC
2.10
3ETTHETable Top/Back Rest (CTK)DOWNBETWEENTHE!DJUSTMENT0LATESBEINGSURETOALIGNTHEHOLES
CTK
2
Note: These two holes go toward the front as shown.
!
SEC
2.11
3ECURETHE4ABLE4OP"ACK2ESTTOTHE,EGSUSINGTHEHARDWARESHOWNRepeat this step for the other side of the Table
Top/Back Rest Assembly.
CTV CTV
AON
AON
AONX
10 mm (x2)
CTVX
52 mm
WARNING
$ONOTOVERTIGHTENTHE#AP.UT

18
SEC
3.1
4OCONVERTTHE4ABLETOA"ENCHORTHE"ENCHTOA4ABLESIMPLYLIFTEITHERTHELEFTORRIGHT!DJUSTMENT,EVERAND
ROTATETHE4ABLE4OP"ACK2ESTTOTHEDESIREDPOSITION
2
TABLE-TO-BENCH/BENCH-TO-TABLE CONVERSION
SEC
3
Adjustment Lever
Adjustment Lever

19
12
#ONGRATULATIONSONYOUR,IFETIME®PRODUCTPURCHASE"YFOLLOWINGTHEINSTRUCTIONSBELOWYOURNEW,IFETIMEPRODUCTSHOULD
PROVIDEYOUWITHYEARSOFSERVICEANDENJOYMENT
Cleaning and Care
4HEPOLYETHYLENEPANELSARESTAINANDSOLVENTRESISTANT-OSTSTAINSCANBEREMOVEDUSINGAMILDSOAPANDASOFTBRISTLED
BRUSH!BRASIVECLEANINGMATERIALSMAYSCRATCHTHEPLASTICANDARENOTRECOMMENDED2EPAIRSCRATCHESORRUSTSPOTSON
THEMETALBYSANDINGTHEAFFECTEDAREALIGHTLYUSINGARUSTPREVENTATIVESPRAYPRIMERANDlNALLYSPRAYINGWITHAHIGHGLOSS
SPRAYENAMELPAINT!VOIDPLACINGADIRECTHEATSOURCEONORNEARSURFACESUNLESSUSINGAHEATBARRIER
CLEANING & CARE

20
LIFETIME 2-YEAR LIMITED FACTORY WARRANTY
LIFETIME PRODUCTS, INC. RESERVES THE RIGHT TO MAKE SUBSTITUTIONS TO WARRANTY CLAIMS IF PARTS ARE UNAVAILABLE OR
OBSOLETE.
,IFETIME0ICNIC4ABLESAREWARRANTEDTOTHEORIGINALPURCHASERTOBEFREEFROMDEFECTSINMATERIALORWORKMANSHIP
FORAPERIODOFTWOYEARSFROMTHEDATEOFORIGINALRETAILPURCHASE4HEWORDhDEFECTSvISDElNEDASIMPERFECTIONS
THATIMPAIRTHEUSEOFTHEPRODUCT$EFECTSRESULTINGFROMMISUSEABUSEORCUSTOMERNEGLIGENCEWILLVOIDTHIS
WARRANTY4HISWARRANTYDOESNOTCOVERDEFECTSDUETOALTERATIONOFACCIDENT4HISWARRANTYDOESNOTCOVERDAMAGE
CAUSEDBYVANDALISMRUSTINGhACTSOFNATUREvORANYOTHEREVENTBEYONDTHECONTROLOFTHEMANUFACTURER
4HISWARRANTYISNONTRANSFERABLEANDISEXPRESSLYLIMITEDTOTHEREPAIRORREPLACEMENTOFDEFECTIVEPRODUCT)F
THEPRODUCTISDEFECTIVEWITHINTHETERMSOFTHISWARRANTY,IFETIME0RODUCTS)NCWILLREPAIRORREPLACEDEFECTIVE
PARTSATNOCOSTTOTHEPURCHASER3HIPPINGCHARGESARENOTCOVEREDANDARETHERESPONSIBILITYOFTHEPURCHASER
4HISWARRANTYDOESNOTCOVERSCRATCHINGSCUFlNGOROTHERCOSMETICDAMAGETHATMAYRESULTFROMNORMALUSE
OFTHEPRODUCT)NADDITIONDEFECTSRESULTINGFROMINTENTIONALDAMAGECUSTOMERNEGLIGENCEORUNREASONABLEUSE
WILLVOIDTHISWARRANTY
,IABILITYFORINCIDENTALORCONSEQUENTIALDAMAGESISEXCLUDEDTOTHEEXTENTPERMITTEDBYLAW7HILEEVERYATTEMPT
ISMADETOEMBODYTHEHIGHESTDEGREEOFSAFETYINALLPRODUCTSFREEDOMFROMINJURYCANNOTBEGUARANTEED4HE
USERASSUMESALLRISKOFINJURYRESULTINGFROMTHEUSEOFTHISPRODUCT!LLMERCHANDISEISSOLDONTHISCONDITION
ANDNOREPRESENTATIVEOFTHECOMPANYMAYWAIVEORCHANGETHISPOLICY
4HISWARRANTYISINLIEUOFALLOTHERWARRANTIESEXPRESSEDORIMPLIEDINCLUDINGWARRANTIESOFMERCHANTABILITYOR
lTNESSFORUSETOTHEEXTENTPERMITTEDBY&EDERALANDSTATELAW.EITHER,IFETIME0RODUCTS)NCNORANYREPRESENTATIVE
ASSUMESANYOTHERLIABILITYINCONNECTIONWITHTHISPRODUCT4HISWARRANTYGIVESYOUSPECIlCLEGALRIGHTSANDYOU
MAYALSOHAVEOTHERRIGHTSWHICHVARYFROMSTATETOSTATE
PLEASE INCLUDE YOUR DATED SALES RECEIPT AND PHOTOGRAPHS OF DAMAGED PARTS.
2%0/2402/$5#4$%&%#43).72)4).'4/
,IFETIME0RODUCTS)NC0/"OX#LEARlELD54
ORCALL-&AMTOPM-34
©Lifetime Products, Inc.
REGISTER YOUR PRODUCT FOR QUICKER CUSTOMER SERVICE.
6ISITWWWLIFETIMECOMORCALLTOREGISTERYOURPRODUCTTODAY
FOR INTERNATIONAL WARRANTY CLAIMS:
!LLWARRANTYCLAIMSMUSTBEACCOMPANIEDBYASALESRECEIPT2EPORTALLWARRANTYCLAIMSINWRITINGTOYOUR
REGIONALSALESSUPPORTREPRESENTATIVE0LEASEINCLUDEYOURDATEDSALESRECEIPTANDPHOTOGRAPHSOFDAMAGED
PARTS
4O)DENTIFYTHEREPRESENTATIVEFORYOURREGION0LEASEVISITWWWLIFETIMECOMINTERNATIONAL