Lightmybricks LEGO Hogwarts Clock Tower User manual

HOGWARTS CLOCK TOWER 75948 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 1
Light My Bricks LEGO Hogwarts
Clock Tower75948
Light Kit Installation Guide

HOGWARTS CLOCK TOWER 75948 LIGHT KIT INSTALL ATION GUIDE INSTALL ATION GUIDE PACK AGE CONTENTS 2
Hi There, we’re Light My Bricks!
We’re here to help you get started on
the LEGO Hogwarts Clock Tower (75948)
Lighting Kit.
This PDF details the instructions for
the LED lightkit only.
If you run into any issues, please refer
to the troubleshooting section towards
the end of this guide.
Have fun andenjoy!
PACKAGE CONTENTS:
6 × White 15cm Bit Lights
4 x White 30cm Bit Lights
3 x Cool White 30cm Bit Lights
2 x Blue 30cm Bit Lights
6 x Flashing White 15cm Micro Bit Lights
1 x 6-Port Expansion Board
2 x 8-Port Expansion Boards
1 x Micro 2-8 Port Expansion Board
1 x Flicker EffectsBoard
1 x 5cm Connceting Cable
3x30cmConnectingCables
4 x AdhesiveSquares
1 x USB Power Cable
LEGO PIECES:
3 × Trans Clear Slope 30 1x1x2/3
1 × Trans Clear Plate w Rounded Bottom 2×2

HOGWARTS CLOCK TOWER 75948 LIGHT KIT INSTALL ATION GUIDE INSTAL ATION GUIDE CONTENTS 3
Contents 4. Before YouBegin
8. Instructions
32. Final Product
33. Troubleshooting
38. Contact
LEGEND : DISCONNECT CONNECT / RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON / TEST
LEGENDE : TRENNEN VERNINDEN / WIEDERVERBINDEN WENDEN / KIPPEN DIRECTIONAL DREHEN / VERDREHEN EINSCHALTEN / TESTEN
LÉGENDE : DÉCONNECTER CONNECTER / RECONNECTER TOUR / INCLINAISON DIRECTIONNEL TORSION / TRESSER POWER ON / TEST
LEGGENDA : SCOLLEGARE CONNETTI / RICONNETTI ROTARE / INCLINARE DIREZIONALE TWIST / TRECCIA POWER ON / TEST

HOGWARTS CLOCK TOWER 75948 LIGHT KIT INSTALL ATION GUIDE INSTAL ATION GUIDE BEFORE YOU BEGIN 4
Before You Begin
LAYING CABLES IN BETWEEN
AND UNDERNEATH BRICKS
Cables can fit in between and
underneath LEGO® bricks, plates, and
tiles providing they are laid correctly
between the LEGO® studs. Do NOT
forcefully join LEGO® together around
cables; instead ensure they are laying
comfortably in between each stud.
CAUTION: Forcing LEGO® to connect
over a cable can result in damaging
the cable and light.
CONNECTING CABLE CONNECTORS
TO EXPANSION BOARDS
Take extra care when inserting
connectors to ports of Expansion
Boards. Connectors can be inserted
only one way. With the expansion
board facing up, look for the soldered
“=” symbol on the left side of the port.
The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into
the port. If a plug won’t fit easily into
a port connector, do not force it.
Incorrectly inserting the connector
can can result in bent pins inside the
port or possible overheating of the
expansion board when connected.

HOGWARTS CLOCK TOWER 75948 LIGHT KIT INSTALL ATION GUIDE INSTAL ATION GUIDE BEFORE YOU BEGIN 5
Before You Begin
CONNECTING CABLE CONNECTORS
TO STRIP LIGHTS
Take extra care when inserting
connectors to ports on the Strip
Lights. Connectors can be inserted
only one way. With the Strip Light
facing up, ensure the side of the
connector with the wires exposed is
facing down. If a plug won’t fit easily
into a port connector, don’t force it.
Doing so will damage the plug and
the connector.
CONNECTING MICRO CABLE
CONNECTORS TO MICRO
EXPANSION BOARD PORTS
Take extra care when inserting the
micro connectors to micro ports of
Micro Expansion Boards. Connecting
Micro Bit Lights to Micro Expansion
Boards is similar to connecting lights
and cables to Strip Lights. With the
expansion board facing up, ensure the
side of the connector with the wires
exposed is facing down. If a plug won’t
fit easily into a port connector, do not
force it. Use your fingernail to push
the plastic part of the connector to the
micro port.

HOGWARTS CLOCK TOWER 75948 LIGHT KIT INSTALL ATION GUIDE INSTAL ATION GUIDE BEFORE YOU BEGIN 6
Before You Begin
INSTALLING BIT LIGHTS UNDER
LEGO® BRICKS AND PLATES
When installing Bit Lights under
LEGO® pieces, ensure they are placed
the correct way up (Yellow LED
component exposed). You can either
place them directly on top of LEGO®
studs or in between.

Instructions
HOGWARTS CLOCK TOWER 75948 LIGHT KIT INSTALL ATION GUIDE INSTALL ATION GUIDE STEPS 7
To ensure a smooth
installation of your light kit,
pleasereadandfolloweach
step carefully.
If yourun into any issues,
pleaserefertothe online
troubleshootingguide.

HOGWARTS CLOCK TOWER 75948 LIGHT KIT INSTALL ATION GUIDE INSTALL ATION GUIDE STEPS 8
Trans Clear Slope 30 1x1x2/3
1 2
LEGEND:
DISCONNECT
CONNECT/RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON / TEST
White 15cm Bit Light
White 30cm Bit Light

HOGWARTS CLOCK TOWER 75948 LIGHT KIT INSTALL ATION GUIDE INSTAL ATION GUIDE STEPS 9
3
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies
(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.
USB Power Cable
8-Port Expansion Board
LEGEND: DISCONNECT CONNECT / RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON / TEST

HOGWARTS CLOCK TOWER 75948 LIGHT KIT INSTALL ATION GUIDE INSTALL ATION GUIDE STEPS 10
LEGEND: DISCONNECT CONNECT/RECONNECT TURN / FLIP DIRECTIONAL TWIST/BRAID POWER ON / TEST
30cm Connecting Cable
4
5
6-Port Expansion Board