Lightmybricks LEGO HOGSMEADE VILLAGE VISIT 76388 LIGHT KIT User manual

LEGO® HOGSMEADE VILLAGE VISIT
#76388 LIGHT KIT
INSTALLATION GUIDE

LEGO HOGSMEADE VILLAGE VISIT 76388 LIGHT KIT INSTALL GUIDE
2
Light My Bricks
LEGO® HOGSMEADE VILLAGE VISIT #76388
LIGHT KIT INSTALLATION GUIDE
Hi There!
We’re here to help you get started on the LEGO®
Hogsmeade Village Visit (76388) Light Kit.
This PDF details the instructions for the LED light kit only.
If you run into any issues, please refer to the
troubleshoot-ing section towards the end of this guide.
Have fun and enjoy!
INSTALLATION GUIDE

LEGO HOGSMEADE VILLAGE VISIT 76388 LIGHT KIT INSTALL GUIDE
PACKAGE CONTENTS 3
PACKAGE CONTENTS: LEGO PIECES:
8 x White 30cm Bit Light
1 x Pink 30cm Bit Light
2 x Yellow 15cm Bit Light
4 x White 30cm Micro Bit Light*
1 x Black Lamp Post w/ LED Installed
1 x 6-Port Expansion Board
1 x 12-Port Expansion Board
1 x Micro 4-Port Expansion Board
•4 x Trans Clear Plate 2x2 w/ Rounded Bottom
2 x Flicker Eects Board
6 x Adhesive Squares
2 x 5cm Connecting Cable
2 x 30cm Connecting Cable
1 x USB Power Cable
(Power Source not Included)
* Indicates 1 extra component has been included just in case!

LEGO HOGSMEADE VILLAGE VISIT 76388 LIGHT KIT INSTALL GUIDE
CONTENTS 4
Contents
Before You Begin 5
Instructions 9
Final Product 33
Troubleshooting 34
Contact 39

LEGO HOGSMEADE VILLAGE VISIT 76388 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 5
Before You Begin
Laying cables in between
and underneath bricks
Cables can fit in between and underneath
LEGO® bricks, plates, and tiles providing
they are laid correctly between the
LEGO® studs. Do NOT forcefully join
LEGO® together around cables; instead
ensure they are laying comfortably in
between each stud.
CAUTION: Forcing LEGO® to connect over
a cable can result in damaging the cable
and light.
Connecting Cable
Connectors To Expansion
Boards
Take extra care when inserting connectors
to ports of Expansion Boards. Connectors
can be inserted only one way. With the
expansion board facing up, look for the
soldered “=” symbol on the left side of the
port. The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into the
port. If a plug won’t fit easily into a port
connector, do not force it.
Incorrectly inserting the connector can
can result in bent pins inside the port or
possible overheating of the expansion
board when connected.

LEGO HOGSMEADE VILLAGE VISIT 76388 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 6
Before You Begin
Connecting Cable
Connectors To Strip Lights
Take extra care when inserting connectors
to ports on the Strip Lights. Connectors
can be inserted only one way. With the
Strip Light facing up, ensure the side of
the connector with the wires exposed is
facing down. If a plug won’t fit easily into
a port connector, don’t force it. Doing so
will damage the plug and the connector.
Connecting Micro Cable
Connectors To Micro
Expansion Board Ports
Take extra care when inserting the
micro connectors to micro ports of Micro
Expansion Boards. Connecting Micro Bit
Lights to Micro Expansion Boards is similar
to connecting lights and cables to Strip
Lights. With the expansion board facing
up, ensure the side of the connector with
the wires exposed is facing down. If a plug
won’t fit easily into a port connector, do
not force it. Use your fingernail to push the
plastic part of the connector to the micro
port.

LEGO HOGSMEADE VILLAGE VISIT 76388 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 7
Before You Begin
Installing Bit Lights Under
Lego® Bricks And Plates
When installing Bit Lights under LEGO®
pieces, ensure they are placed the correct
way up (Yellow LED component exposed).
You can either place them directly on top of
LEGO® studs or in between.

LEGO HOGSMEADE VILLAGE VISIT 76388 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 8
INSTRUCTIONS
To ensure a smooth installation of
your light kit, please read and follow
each step carefully. If you run into
any issues, please refer to the online
troubleshooting guide.
LEGEND:DISCONNECT DIRECTIONAL
LEGENDE:TRENNEN DIRECTIONAL
LÉGENDE:DÉCONNECTER DIRECTIONNEL
LEGGENDA: SCOLLEGARE
CONNECT / RECONNECT
VERNINDEN / WIEDERVERBINDEN
CONNECTER / RECONNECTER
CONNETTI / RICONNETTI
TURN / FLIP
WENDEN / KIPPEN
TOUR / INCLINAISON
ROTARE / INCLINARE DIREZIONALE
TWIST / BRAID
DREHEN / VERDREHEN
TORSION / TRESSER
TWIST / TRECCIA
POWER ON / TEST
EINSCHALTEN / TESTEN
POWER ON / TEST
POWER ON / TEST

LEGO HOGSMEADE VILLAGE VISIT 76388 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 9
1
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

LEGO HOGSMEADE VILLAGE VISIT 76388 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 10
2
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

LEGO HOGSMEADE VILLAGE VISIT 76388 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 11
34
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Pink 30cm Bit Light White 30cm Bit Light
Ensure the Bit
Light is secured
with the LED facing
downwards

LEGO HOGSMEADE VILLAGE VISIT 76388 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 12
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
White 30cm Bit Light Trans Clear Plate 2x2
w/ Rounded Bottom
5
Ensure the Bit
Light is secured
with the LED facing
downwards

LEGO HOGSMEADE VILLAGE VISIT 76388 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 13
6
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
White 30cm Bit Light
Flicker Eects Board
Connect the Bit
Light to the ‘OUT’
port

LEGO HOGSMEADE VILLAGE VISIT 76388 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 14
7
8
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
White 30cm Bit Light 5cm Connecting Cable
6-Port Expansion Board
Connect the 5cm
Connecting Cable to
the ‘IN’ port
Connect the
Bit Light to another
‘OUT’ port

LEGO HOGSMEADE VILLAGE VISIT 76388 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 15
9
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

LEGO HOGSMEADE VILLAGE VISIT 76388 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 16
10
11
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Connect to a
USB, Power Bank,
USB to AA Battery
Pack or USB Wall
Adaptor (each sold
separately)
USB Power Cable
30cm Connecting Cable
If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.
Temporarily
disconnect the USB
Power Cable

LEGO HOGSMEADE VILLAGE VISIT 76388 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 17
12
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Black Lamp Post w/ LED Installed
If your lamp post
comes with a lamp
head and dish,
remove them as they
won’t be needed

LEGO HOGSMEADE VILLAGE VISIT 76388 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 18
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

LEGO HOGSMEADE VILLAGE VISIT 76388 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 19
13
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

LEGO HOGSMEADE VILLAGE VISIT 76388 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 20
14
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
White 30cm Micro Bit Light
Remove the
following sections by
disconnecting them
at the indicated
arrows