Lightmybricks LEGO HOME ALONE 21330 User manual

LEGO® HOME ALONE
#21330 LIGHT KIT
INSTALLATION GUIDE

LEGO HOME ALONE 21330 LIGHT KIT INSTALL GUIDE
2
Light My Bricks
LEGO® HOME ALONE #21330 LIGHT
KIT INSTALLATION GUIDE
Hi There!
We’re here to help you get started on the LEGO®
Home Alone (21330) Light Kit.
This PDF details the instruktiv for the LED light kit only.
If you run into any issues, please refer to the
troubleshoot-ing section towards the end of this guide.
Have fun and enjoy!
INSTALLATION GUIDE

LEGO HOME ALONE 21330 LIGHT KIT INSTALL GUIDE
PACKAGE CONTENTS 3
PACKAGE CONTENTS: EXTRA BRICKS:
9 x Warm White Strip Light
12 x White 30cm Bit Light
4 x Flashing White 30cm Bit Light
5 x White 15cm Bit Light
2 x Orange 30cm Bit Light
2 x Red 30cm Bit Light
40 x Warm White 30cm Micro Bit Light
1 x 2-Port Expansion Board
2 x 6-Port Expansion Board
4 x 8-Port Expansion Board
2 x 2-4 Port Micro Expansion Board
6 x 2-8 Port Micro Expansion Board
•1 x Round Plate 1x1 Open Stud - Light Grey
•2 x Plate 1x6
•1 x Plate 2x8 - Black
•2 x Round Plate 1x1 – Trans Orange
•2 x Round Plate 1x1 – Trans Red
•1 x Round Plate 1x1 – Trans Clear
•1 x Plate 2x2 W Rounded Bottom – Trans Clear
•1 x Tile 1x2 – Black
4 x Flicker Eects Board
12 x 5cm Connecting Cable
2 x 15cm Connecting Cable
8 x 30cm Connecting Cable
2 x 50cm Connecting Cable
3 x Wireless Power Connector Sets
1 x USB Power Cable
(Power Source not Included)
1 x Flat Battery Pack

LEGO HOME ALONE 21330 LIGHT KIT INSTALL GUIDE
CONTENTS 4
Contents
Before You Begin 5
Instructions 8
Final Product 80
Troubleshooting 81
Contact 87

LEGO HOME ALONE 21330 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 5
Before You Begin
Laying cables in between
and underneath bricks
Cables can fit in between and underneath
LEGO® bricks, plates, and tiles providing
they are laid correctly between the
LEGO® studs. Do NOT forcefully join
LEGO® together around cables; instead
ensure they are laying comfortably in
between each stud.
CAUTION: Forcing LEGO® to connect over
a cable can result in damaging the cable
and light.
Connecting Cable
Connectors To Expansion
Boards
Take extra care when inserting connectors
to ports of Expansion Boards. Connectors
can be inserted only one way. With the
expansion board facing up, look for the
soldered “=” symbol on the left side of the
port. The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into the
port. If a plug won’t fit easily into a port
connector, do not force it.
Incorrectly inserting the connector can
can result in bent pins inside the port or
possible overheating of the expansion
board when connected.

LEGO HOME ALONE 21330 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 6
Before You Begin
Connecting Cable
Connectors To Strip Lights
Take extra care when inserting connectors
to ports on the Strip Lights. Connectors
can be inserted only one way. With the
Strip Light facing up, ensure the side of
the connector with the wires exposed is
facing down. If a plug won’t fit easily into
a port connector, don’t force it. Doing so
will damage the plug and the connector.
Connecting Micro Cable
Connectors To Micro
Expansion Board Ports
Take extra care when inserting the
micro connectors to micro ports of Micro
Expansion Boards. Connecting Micro Bit
Lights to Micro Expansion Boards is similar
to connecting lights and cables to Strip
Lights. With the expansion board facing
up, ensure the side of the connector with
the wires exposed is facing down. If a plug
won’t fit easily into a port connector, do
not force it. Use your fingernail to push the
plastic part of the connector to the micro
port.

LEGO HOME ALONE 21330 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 7
Before You Begin
Installing Bit Lights Under
Lego® Bricks And Plates
When installing Bit Lights under LEGO®
pieces, ensure they are placed the correct
way up (Yellow LED component exposed).
You can either place them directly on top of
LEGO® studs or in between.

LEGO HOME ALONE 21330 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 8
INSTRUCTIONS
To ensure a smooth installation of
your light kit, please read and follow
each step carefully. If you run into
any issues, please refer to the online
troubleshooting guide.
LEGENDLEGEND:: DISCONNECTDISCONNECT DIRECTIONALDIRECTIONAL
LEGENDELEGENDE:: TRENNENTRENNEN DIRECTIONALDIRECTIONAL
LÉGENDELÉGENDE:: DÉCONNECTERDÉCONNECTER DIRECTIONNELDIRECTIONNEL
LEGGENDALEGGENDA:: SCOLLEGARESCOLLEGARE
CONNECT / CONNECT / RECONNECTRECONNECT
VERNINDEN VERNINDEN / WIEDERVERBINDEN/ WIEDERVERBINDEN
CONNECTER CONNECTER / RECONNECTER/ RECONNECTER
CONNETTI / RICONNETTICONNETTI / RICONNETTI
TURN TURN / / FLIPFLIP
WENDEN WENDEN / KIPPEN/ KIPPEN
TOUR TOUR / INCLINAISON/ INCLINAISON
ROTARE ROTARE / INCLINARE/ INCLINARE DIREZIONALEDIREZIONALE
TWIST TWIST / BRAID/ BRAID
DREHEN DREHEN / VERDREHEN/ VERDREHEN
TORSION TORSION / TRESSER/ TRESSER
TWIST TWIST / / TRECCIATRECCIA
POWER POWER ON ON / TEST/ TEST
EINSCHALTEN EINSCHALTEN / TESTEN/ TESTEN
POWER POWER ON ON / / TESTTEST
POWER POWER ON ON / / TESTTEST

LEGO HOME ALONE 21330 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 9
1
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

LEGO HOME ALONE 21330 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 10
2
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

LEGO HOME ALONE 21330 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 11
3
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
White 15cm Bit Light

LEGO HOME ALONE 21330 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 12
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
4
White 15cm Bit Light

LEGO HOME ALONE 21330 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 13
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.
8-Port Expansion Board
Flat Battery Pack

LEGO HOME ALONE 21330 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 14
5
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
White 15cm Bit Light White 15cm Bit Light
Red 30cm Bit Light
Trans Red Round Plate 1x1
Trans Orange Round Plate 1x1 Trans Orange Round Plate 1x1

LEGO HOME ALONE 21330 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 15
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Connect the 4 Bit
Lights to the 8-Port
Expansion Board
from step 4.
Red 30cm Bit Light
Trans Red Round Plate 1x1

LEGO HOME ALONE 21330 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 16
6
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.

LEGO HOME ALONE 21330 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 17
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

LEGO HOME ALONE 21330 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 18
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Turn the crank
so that the train is
towards the back of
the house.
x2

LEGO HOME ALONE 21330 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 19
7
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
x14
White 30cm Micro Bit Light

LEGO HOME ALONE 21330 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 20
8
9
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
x9
x9
White 30cm Micro Bit Light
White 30cm Micro Bit Light