Lightolier D14 User manual

Lightolier is a Philips group brand
Architectural Decorative Vetro Downlight D14
Page 1 of 1 Evolution, Low Voltage
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • B1108
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Features
1. Decorative Element: Solid high temp, UV resistant composite with open
aperture; frosted interior diameter, polished exterior and machined facet
along bottom edge.
2. Die Cast Construction Ring: Exterior edge of construction ring is visible,
satin aluminum finish matches diameter of decorative element for a
flangeless appearance.
3. Integral Reflector: 16 ga. aluminum, 50° visual cutoff to lamp and lamp
image. Decorative Element is mechanically attached to reflector via die cast
ring. Reflector is specular clear for best performance and aesthetics.
4. Cover Glass: 3" Evolution contains high temperature soft focus lens. 4"
Evolution contains high temperature perimeter frost.
5. Trim Kit: For 3" and 4" Evolution, trim kit, reflector and decorative element
ship complete.
6. Frame-In Kit: Specified separately. See Trim Kit Specification Sheet for
details.
Mechanical
Decorative element is mechanically secured to the die cast construction ring
and the integral reflector from the factory.
Labels
U.L. (Damp Location)
Decorative Element/Trim Kit
Catalog No.
Frame-In Kit Lamping Dimensions
A B C
3" Evolution D3MR14 C3LV, C3AICLV, C3ALV, C3LVE1, C3LVE2, C3ALVE1, C3AICLVE1, C3ALVE2 50W MR16 2 3/4" 5 1/4" 2 1/4"
4" Evolution D4MR14 C4LV; C4ALV; C4AICLV 50W MR16 4" 6 3/4" 2 1/2"
Complete fixture consists of Decorative Element/Trim-Kit + Frame-In Kit. Each sold seperately.
2 Piece Ordering System, Example: D3MR14+ C3LV
B
A
C
3
1
2