Lightolier Calculite ProSpec PA1M1675 User manual

5
6
7
911
12 131 4
10 3/8" L X 10" W
5" L X 5" W Opening
83/4"
Depth
23
13"
13 1/8"
17" 5"
810
14
1 3/4"
8"
Top View
Ceiling Cutout: 6 3/16"L x 6 3/16"W
Ordering Information: MR 16 Series A
Cat. No. Lamp Ceiling Trim Aperture Finish
PA1M167EBL (1) 75W MR 16* Overlap Black with White Flange
PA1M167EWL (1) 75W MR 16* Overlap White with White Flange
PA1M167EBTL (1) 75W MR 16* Trimless Black
PA1M167EWTL (1) 75W MR 16* Trimless White
*50W max. lamping when using accessories
PA1M167EBL = (Flanged) Black/White
PA1M167EWL = (Flanged) White
PA1M167EBTL = (Trimless) Black
PA1M167EWTL = (Trimless) White
Flanged Trimless

Calculite®ProSpec®Linear Downlight PA1M1675
Page 1 of 2 1 Light MR 16 Series A
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte Thomas Company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2011 Genlyte Thomas Group LLC (Lightolier Division) • C0711
Features
1. Aperture Frame: Provides clean support for lamp holders and overlapping
flange or trimless installation. Extruded aluminum. Rigidly welded together
on all corners.
2. Media Cartridge: Allows convenient loading and removal of up to two
accessories (including lamp cover glass; lamp cover glass may be replaced
with solid glass accessory). Easily installed and removed for lamping with a
simple twisting motion. Constructed of die-cast aluminum.
3. Cross Blade Louver: Extruded aluminum. 1" deep, provides additional
shielding and can be easily removed.
4. Ad ustable Ring: Allows 360 horizontal and 35 (on width) and 45 (on
diagonal) vertical adjustment.
5. Tortiontite Spring: For easy installation of aperture frame.
6. Housing: Die-formed 22 ga. steel. Finish: Black.
7. Mounting Brackets: Adjustable vertically from outside of housing.
8. Thermal Protector: Meets NEC, UL & CSA requirements.
9. Lampholder: Steatite for GX/GY 5.3 Bi-Pin lamps. 250 C Teflon®leads.
10.Junction Box: 14 ga. steel, 4" x 3 1/2" x 2" box. Allows inspection from
below.
11.Lamp and Accessory Support: .032" steel, flared for easy entry of
Media Cartridge.
12.Lens Retaining Ring: .093" spring steel rod. Holds accessories in place.
13.Lamp Guard: Heat resistant clear glass. Lamp manufacturers requirement.
14.Transformer Housing: Die-formed 18 ga. steel.
Electrical
Electronic Transformers: Offer reliable operation and are accessible from
below for servicing. 12V Secondary 75 VA. each lamp.
Dimming Controls: Use only dimmers specifically designed for use with
electronic transformers. Low Voltage fixtures may produce audible sound when
used with dimmers, which may be objectionable in acoustically critical areas.
UL/cUL listed for through branch circuit wiring with maximum of
(8) no. 12 AWG, 90 C.
Finish
All painted finishes are powder coated baked enamel.
Options and Accessories
Accessories: 2 1/2" dia. series, filters, lenses, screens and louvers, (2)
accessories maximum, including lamp cover glass. Lamp guard glass may be
replaced with solid glass accessory.
Labels
UL/cUL (Suitable for Damp Location), I.B.E.W.
Teflon®is a registered trademark of E.I. DuPont.
Add a “1” for 120v or “2” for 277v at the end of the catalog number for voltage

Data are based on bare lamp
photometrics. Dashed lines in beam
spreads indicate narrow axes of oval
shaped beams.
FC is initial footcandles at center of
beam. Land Ware to the point that
the candlepower drops 50% of
maximum.
Calculite®ProSpec®Linear Downlight PA1M1675
Page 2 of 2 1 Light MR 16 Series A
Lightolier a Genlyte Thomas Company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2011 Genlyte Thomas Group LLC (Lightolier Division) • C0711
Job Information Type:
Lighting
Performance Data